Wistron Neweb LVD1-IDU Verizon Smart Display User Guide

Wistron Neweb LVD1-IDU Verizon Smart Display

Introduction

With a large touch screen and the intelligent Amazon’s Alexa voice assistance, Verizon Smart Display makes your life easier and more interesting.

Unboxing Information

Inside the product package for the Verizon Smart Display, you should find the following items:

• Verizon Smart Display × 1
• Power adaptor × 1

Product Overview

LED Behavior

Setup and Activation

1. Unbox the Verizon Smart Display, and power adaptor.
2. Connect the cables:
3. .Follow the on-screen instructions to complete the startup settings (e.g. entering a PIN code).

• Plug the power adapter connector into the power port on the Verizon Smart Display.
• Plug the power adapter into a wall outlet

Product Specifications

• LTE
  Cat. M1, band 4 and band 13

• Wi-Fi
  2.4GHz and 5GHz 802.11ac 2×2 MIMO

• Bluetooth
  Bluetooth® 5.0
  Supports BR/EDR

• Memory
  4 GB RAM

• Storage
  16 GB eMMC

• Dimensions
  209.52×116.5×133.48 mm (W×D×H)

• LCM
  8”
  1280×800 pixels

• PSU
  12V/3A

• Voice assistant
  “Hi Verizon”
  Amazon’s “Alexa”
  Supports Alexa announcements, calling, messaging (ACM) service and BlueJeans video conferencing

• Operating Temperature
  0 °C to 40 °C

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.

FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: this device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation.

Important Notice
The user is responsible for determining whether surfaces and installation environments are appropriate. Please remember that many factors influence installation safety. Please follow the user manual. Materials, flatness, cleanliness of surfaces, humidity, wind speed, time and many other factors can affect the adhesiveness and fixedness of this product. Verizon does not guarantee the product can be fixed and will not fall. Given the variety of factors that can affect the adhesion and fixedness, it is essential that the user evaluates the conditions of surfaces and the environment to determine whether they are suitable for installation.

DISCLAIMER
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, VERIZON MAKES NO OTHER WARRANTIES, EITHER EXPRESS, IMPLIED OR STATUTORY. VERIZON DISCLAIMS ANY LIABILITY CAUSED BY ANY USER’S NON-COMPLIANCE WITH THE USER MANUAL.

Safety Warnings

Adapter
Do not use any other power adaptor except for the one that accompanies this unit or a power adaptor identified in the list below. Use of another adapter could result in damage to the unit. The following power adaptor is qualified for use with this Verizon Smart Display: This unit must be powered by LUCENT TRANS, model 1A100-US1230; 12V, 3A, 36W or DELTA ELECTRONICS, model ADP-36DW B2A; 12V, 3A, 36W

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>