ANKER A2583 Wireless Charger Instructions
- June 6, 2024
- Anker
Table of Contents
A2583 Wireless Charger
Instructions
Charging Base
| Charging Base | Front LED Indicators | Status |
|---|---|---|
| Left LED Indicator | Right LED Indicator |
Solid white for 3 seconds,
then turns off| Solid white for 3 seconds,
then turns off| Connected to power
Solid white| | Charging your mobile phone
| Solid white| Charging your AirPods
| Flashing orange| Incompatible AC adapter connected, indicating that you
should switch to the supplied wall charger or a USB-C wall charger (45W or
above) that supports Power Delivery
Flashing white| Metal object detected
Rear LED Indicator| Status
Solid white for 10 seconds, then turns off| Working normally
Flashing orange| Incompatible AC adapter connected, indicating that you should
switch to the supplied wall charger or a USB-C wall charger (45W or above)
that supports Power Delivery
Incompatible AC adapter connected, indicating that you should switch to the
supplied wall charger or a USB-C wall charger (45W or above) that supports
Power Delivery To charge a low-power device with a current capacity of 80mA or
less, press and hold (or double-press) the button on the portable charger for
2 seconds to activate the low-current charging mode.
Use with the supplied wall charger only. Do not connect to a computer’s USB
port as it may affect the wireless charging function.
Using an ultra-thick protective phone case or a case with a magnetic/metal
plate is not recommended as it may affect the wireless charging function.
Do not place any foreign objects between your smartphone and the wireless
charger’s surface, including metal pads on a car mount, credit cards, keys,
coins, NFC cards, or other metal objects, as it may cause overheating.
Important Safety Instructions
Please refer to the electrical and safety information before installing or
operating the product.
Avoid dropping.
Do not disassemble.
Do not expose to liquids.
For the safest and fastest charge, use original or certified cables.
This product is suitable for moderate climates only.
The maximum ambient temperature during the use of this product must not exceed
40°C.
Open flame sources, such as candles, must not be placed on this product.
Only use a dry cloth or brush to clean this product.
The socket outlet shall be installed near the product and shall be easily
accessible.
Disconnection from line voltage should be made via the AC plug.
When using this product, basic precautions should always be followed, including the following:
- Store the product in a cool and dry place.
- Do not store the product in a hot or humid environment.
- Use of a power supply or charger not recommended or sold by the product manufacturer may result in a risk of fire or injury to persons.
- Do not disassemble the product. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or injury to persons.
- If the product is not used for long periods of time, you should charge and discharge once every three months.
- When charging a device, the product may feel warm. This is a normal operating condition and should not be a cause for concern.
- Do not dispose of the product in heat or fire.
- Do not clean the product with harmful chemicals or detergents.
- Misuse, dropping, or excessive force may cause product damage.
- When disposing of secondary cells or batteries, keep cells or batteries of different electrochemical systems separate from each other.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:(1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. During the operation of the device, a distance of 15
cm surrounding the device and 20 cm above the top surface of the device must
be respected.
Product Name: Wireless Charger
Model: A2583
The following importer is the responsible party (for FCC matters only).
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1 800 988 7973
IC Statement
This device complies with RSS ‐216 of Industry Canada. Operation is subject to
the condition that this device does not cause harmful interference.
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science, and Economic Development Canada’s license-exempt
RSS(s).
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
RF exposure statement:
The equipment complies with the IC Radiation exposure limit set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator and your body.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A2583 is in
compliance with Directives 2014/53/EU & 2011/65/EU. The full text of the EU
declaration of conformity is available at the following internet address:
https://www.anker.com/
GB Declaration of Conformity
Hereby, Anker Innovations Limited declares that the product type A2583 is in
compliance with Radio Equipment Regulations 2017. The full text of the GB
declaration of conformity is available at the following internet address:
https://www.anker.com
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
Anker Innovations Deutschland GmbH
Georg-Muche-Strasse 3, 80807 Munich, Germany
Anker Technology (UK) Ltd
Suite B, Fairgate House, 205 Kings Road, Tyseley, Birmingham, B11 2AA, United
Kingdom
This device was tested for typical body-worn operations. To comply with RF
exposure requirements, a minimum separation distance of 20mm must be
maintained between the user’s body and the handset, including the antenna.
Third-party belt clips, holsters, and similar accessories used by this device
should not contain any metallic components. Body-worn accessories that do not
meet these requirements may not comply with RF exposure requirements and
should be avoided. Use only the supplied or an approved antenna.
This device is in compliance with the essential requirements and other
relevant provisions of the UKCA. All essential radio test suites have been
carried out.
Specifications
Charging Base
- Input
15V == 3A
Output
Wireless Output (TWS): 5W Max
USB-C Output (for watch module only): 5W
Pogo Pin Output: 15V==1.2A (18W Max)
TX/RX frequency range
115-205KHz (only for FCC ID and IC）
Wall Charger
Output
5V==3A / 9V==3A / 15V==3A / 20V==2.25A
Product Number: A2583
Wireless Charger
This product complies with the radio interference requirements of the European
Community.
Indoor use only
This symbol indicates that this product shall not be treated as household
waste. Instead, it shall be handed over to the applicable collection point for
the recycling of electrical and electronic equipment.
Customer Service
18-month Limited Warranty
Lifetime Technical Support
support@anker.com
support.mea@anker.com (For the Middle East and
Africa Only)
(US) +1 (800) 988 7973 Mon-Fri 9:00 AM – 5:00 PM (PT)
(UK) +44 (0) 1604 936200 Mon-Fri 6:00 AM – 2:00 PM (GMT)
(DE) +49 (0) 69 9579 7960 Mo-Fr 6:00 – 11:00
(Middle East & Africa) +971 42463266 Sun-Thu 9:00 – 17:30 (GMT+4)
(UAE) +971 8000320817 Sun-Thu 9:00 – 17:30 (GMT+4)
(KSA) +966 8008500030 Sun-Thu 8:00 – 16:30 (GMT+3)
(Kuwait) +965 22069086 Sun-Thu 8:00 – 16:30 (GMT+3)
(Egypt) +20 8000000826 Sun-Thu 7:00 – 15:30 (GMT+2)
For FAQs and more information, please visit
https://www.anker.com/support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>