Fuzhou Rihen Electronic Technology ES9100 Wireless Charger Desktop Organizer Instruction Manual
- June 6, 2024
- Fuzhou Rihen Electronic Technology
Table of Contents
Fuzhou Rihen Electronic Technology ES9100 Wireless Charger Desktop
Organizer
Instruction Manual
To ensure a long service life and optimum functionality of the product, we recommend that you read this manual carefully.
Package Content
- Wireless charger organizer
- USB Cable
- User Manual
Product description
- charging sensing area
- pen holder
- memo holder
- accessory holder
- input port
Specifications
- Power: 5W,7.5W,10W
- lnput:5V/2A, 9V/2A
- Output:5W, 7 .5W,10W
- Charging Distance: Within 8mm
- Charging Efficiency: Within 75%
Instruction for use
- Using the USB cable supplied, insert the micro USB connector into its port on the charger and then insert the standard USB-A connector into any standard USB charging port with a maximum approved power source of 5V/2A.
- Place your QI-compatible phone with an inductive wireless charge feature onto the charger’s charge plate.
- You may also need to remove your phone case to facilitate charging.
Note
Only devices which support Qi Wireless charge technology can be wirelessly
charged from this charger, please check the specifications of your device.
Caution and safety:
- Do not expose to moisture, sunlight, or other heat sources.
- Keep away from children and ensure all adults who use this product read and follow these instructions and warnings.
- Operation temperature range between 32 °F and 113 °F.
- Use correct voltage charge, 5V only.
CAUTION: Risk of Fire and Burns. Do Not Open, Crush, Heat Above 45°C /113
°For Incinerate.
Follow Manufacturer’s Instructions.
FCC Statement:
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment. NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
c radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help with important announcement
Radiation Exposure Statement
The equipment complies with FCC radiation exposure limits are set forth for an
uncontrolled environment. During the operation of device, a distance of 15 cm
surrounding the device and 20 cm above the top surface of the device must be
respected.
IMPORTANT SAFETY INSTRUCTIONS
WARNING- When using this product, basic precautions should always be
followed, including the following:
- Read all the instructions before using the product.
- To reduce the risk of injury, close supervision is necessary when the product is used near children.
- Do not put fingers or hands into the product.
- Do not expose the product to rain or snow.
- Use of a power supply or charger not recommended or sold by the product manufacturer may result in a risk of fire or injury to persons.
- Do not use the product in excess of its output rating. Overloading outputs above rating may result in a risk of fire or injury to persons.
- Do not use the product that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
- Do not disassemble the product. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire on injury to persons.
- Do not expose the product to fire or excessive temperatures. Exposure to fire or temperature above 100 °C may cause an explosion.
- Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
- Switch off the product when not in use.