ASUS Q19535 Rog Chakram X Gaming Mouse User Guide
- June 6, 2024
- Asus
Table of Contents
- Package Contents
- Mouse features
- DPI adjustment
- Polling Rate
- Using the dongle extender
- Customizing the joystick or applying the cover
- Replacing the switches
- Connecting your gaming mouse
- Default mouse profiles
- Default mouse profiles
- Setting up Chakram X controls and joystick in Steam
- System requirements
- Getting started
- Notices
- CE Mark Warning
- Service and Support
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ASUS Q19535 Rog Chakram X Gaming Mouse
Package Contents
Mouse features
❶ Left-click button
❷ Scroll wheel
❸ USB dongle (hidden)
❹ Logo plate (hidden)
❺ USB Type-C® port / USB Type-C®
❻ Right-click button
❼ Connection mode switch
❽ Pair button
❾ DPI button
❿ AimPoint optical sensor
⓫ Qi wireless charging area
⓬ Analog/Digital joystick
⓭ Side button 6
⓮ Side button 7
⓯ Side button 8
⓰ Side button 9
DPI adjustment
DPI Button
The hidden DPI button on the bottom of the mouse switches the DPI between 4
levels instantly. The LED will flash to indicate the current DPI level. Please
refer to the table below for the more information on the DPI levels.
Resolution
| DPI 1 (Red)| DPI 2 (Purple)| DPI 3 (Default / Blue)| DPI 4
(Green)
---|---|---|---|---
100 DPI to 36000 DPI| 400 DPI| 800 DPI| 1600 DPI|
3200 DPI
DPI On-The-Scroll
The DPI On-The-Scroll tuning function allows you to customize the DPI of your
gaming mouse without using Armoury Crate.
-
Press and hold the DPI button for 3 seconds until the LEDs on your gaming mouse light up.
-
Rotate the scroll wheel forwards or backwards to adjust the DPI. The LED color hue on your scroll wheel will differ depending on the DPI adjustment. Move the mouse around to test until you find the best sensitivity.
NOTE:- The DPI increments at 100 DPI per scroll forwards and decrements at 100 DPI per scroll backwards.
- The DPI ranges from 100 DPI (blue) to 36000 DPI (red).
-
Tuning DPI On-The-Scroll will disable independent X-Y controls
-
Press the DPI button again once you have finished customizing the DPI value to save the changes made.
Polling Rate
****|
Wired
| RF|
Bluetooth
---|---|---|---
250
| V| V| V
500| V| V|
1000
| V| V|
1000| V| V|
1000
| V| **|
8000| V**|
|
Using the dongle extender
Connect the bundled paracord cable and the RF receiver to the dongle extender
to improve wireless reception or extend the RF signal range. You may also clip
the dongle extender to your mouse pad (2~3mm in thickness) if required.
Customizing the joystick or applying the cover
NOTE: To prevent damage, place the mouse on a flat surface, then push the joystick into the socket while ensuring the small circular hole is pointing upwards.
Replacing the switches
IMPORTANT!
- Ensure to install the switch with its button facing the front of the mouse.
- Ensure that the switches are seated properly on the switch sockets.
- Both 3-pin mechanical and 5-pin optical micro switches are supported. Refer to www.asus.com for the list of compatible switches.
Connecting your gaming mouse
Using the ROG Paracord cable
Connect the bundled USB Type-C® to Type-A cable to your gaming mouse and any
available USB 3.2 Gen 1 port (or above) on your computer for fast-charging.
Using RF wireless mode
- Connect the USB dongle to a USB port on your computer.
- Set the connection switch to the RF 2.4G Wireless mode.
- Press and hold the Pair button for 3 seconds if the connection is lost.
Default mouse profiles
Switching to Bluetooth mode
- When pairing Bluetooth mode for the first time, your gaming mouse will enter discovery mode automatically. Find ROG Chakram X from the device list and then confirm to pair.
- Up to 3 devices can be saved. Press the Pair button to cycle through the 3 paired devices, or you can overwrite any of the saved devices by pressing and holding the Pair button for 3 seconds.
Default mouse profiles
NOTE: The mouse buttons and analog/digital joystick can be assigned to other functions using Armoury Crate.
Setting up Chakram X controls and joystick in Steam
You can setup your gaming mouse buttons and joystick to work like a controller in Steam.
- Connect your gaming mouse to your computer.
- Install Armoury Crate and Steam.
- Launch Armoury Crate, then switch your gaming mouse to Profile 3, and click on Reset to revert to default settings.
- Launch Steam, then go to View > Settings > Controller > GENERAL CONTROLLER SETTINGS.
- Only check the Xbox Configuration Support and Generic Gamepad Configuration Support options.
- Under Detected Controllers, select CHAKRAM X.
- You can set up the Chakram X joystick and 4 side buttons to work exactly like a gamepad. Please refer to the table below to map side buttons 6, 7, 8, and 9 on the Chakram X to work as an XBOX controller in Steam:
Chakram X – Steam| Chakram X – Horizontal| Chakram X – Vertical|
XBOX
---|---|---|---
Button 0
| Side button 8| Side button 7| B
Button 1| Side button 9| Side button 8|
A
Button 2
| Side button 6| Side button 9| X
Button 3| Side button 7| Side button 6|
Y
- Map the x-axis and y-axis of the Analog joystick to the Left Stick X and Left Stick Y commands.
- Press Esc on your keyboard, then click SAVE to complete.
- If you wish, you can share the settings you’ve made online from the next prompt.
System requirements
- Windows® 10 and Windows® 11
- 100 MB of hard disk space (for optional software installation)
- Internet connection (for downloading optional software)
- USB 2.0 port (USB 3.2 Gen 1 port for fast charging)
Getting started
To set up your ROG Chakram X Gaming Mouse:
- Connect the USB cable to your computer’s USB port.
- Download and install the Armoury Crate software from https://rog.asus.com
- You may refer to the ROG forum at https://rog.asus.com/ forum/ for more information.
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION! The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
**Compliance Statement of Innovation, Science and Economic Development
Canada (ISED)**
This device complies with Innovation, Science and Economic Development Canada
licence exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device mustaccept any interference, including
interference that may cause undesired operation of the device.
CAN ICES-003(B)/NMB-003(B)
Limitation of Liability
Circumstances may arise where because of a default on ASUS’ part or other
liability, you are entitled to recover damages from
ASUS. In each such instance, regardless of the basis on which you are entitled
to claim damages from ASUS, ASUS is liable for no more than damages for bodily
injury (including death) and damage to real property and tangible personal
property; or any other actual and direct damages resulted from omission or
failure of performing legal duties under this Warranty Statement, up to the
listed contract price of each product.
ASUS will only be responsible for or indemnify you for loss, damages or claims
based in contract, tort or infringement under this Warranty Statement.
This limit also applies to ASUS’ suppliers and its reseller. It is the maximum for which ASUS, its suppliers, and your reseller are collectively responsible.
UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1) THIRD- PARTY CLAIMS AGAINST YOU FOR DAMAGES; (2) LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR (3) SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR POSSIBILITY.
Proper disposal
| DO NOT throw the device in municipal waste. This product has been designed
to enable proper reuse of parts and recycling. The symbol of the crossed out
wheeled bin indicates that the product (electrical, electronic equipment and
mercury-containing button cell battery) should not be placed in municipal
waste. Check local regulations for disposal of electronic products
---|---
| DO NOT throw the device in fire. DO NOT short circuit the contacts. DO NOT
disassemble the device.
---|---
REACH
Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm.
ASUS Recycling/Takeback Services
ASUS recycling and takeback programs come from our commitment to the highest
standards for protecting our environment.
We believe in providing solutions for you to be able to responsibly recycle
our products, batteries, other components as well as the packaging materials.
Please go to http://csr.asus.com/english/Takeback.htm for detailed recycling
information in different regions.
EAC Certification Logo
Ukraine Certification Logo
UKCA RF Output table (The Radio Equipment Regulations 2017)
Function
| Frequency|
Maximum Output Power (EIRP)
---|---|---
2.4GHz wireless
|
(2403 – 2480MHz) – Mouse
|
8dBm
(2403 – 2480 MHz) – Dongle
| 0dBm
BLE| (2402 – 2480MHz) – Mouse|
6dBm
CE RED RF Output table (Directive 2014/53/EU)
Function
| Frequency| Maximum Output Power (EIRP)
---|---|---
2.4GHz wireless| (2403 – 2480MHz) – Mouse|
8dBm
(2403 – 2480 MHz) – Dongle
| 0dBm
BLE| (2402 – 2480MHz) – Mouse|
6dBm
Simplified UKCA Declaration of Conformity
ASUSTek Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of The Radio Equipment Regulations 2017 (S.I. 2017/1206). Full text of UKCA declaration of conformity is available at https://www.asus.com/support/.
CE Mark Warning
English ASUSTeK Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of related Directives. Full text of EU declaration of conformity is available at: www.asus.com/support
Service and Support
Visit our multi-language website at https://www.asus.com/support/.
Manufacturer | ASUSTek COMPUTER INC. |
---|---|
Address, City | 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, |
Taiwan
Authorized Representative in Europe| ASUS COMPUTER GmbH
Address| Harkortstrasse 21-23, 40880 Ratingen
Country| Germany
Authorized Representative in United Kingdom| ASUSTEK (UK) LIMITED
Address| 1st Floor, Sackville House, 143-149 Fenchurch Street, London,
EC3M 6BL, England
Country| United Kingdom
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>