clarity XLC3.4+HF Cordless Phone Installation Guide
- June 6, 2024
- Clarity
Table of Contents
Clarity XLC3.4+HF Cordless Phone
What’s in the Box:
(A) XLC3.4+HF Amplified Cordless Phone
(B) XLC3.4+HF Power Supply
(C) XLC3.4+HF Telephone Line Long
(D) Voice Dialer
(E) Voice Dialer Power Supply
(F) Voice Dialer Telephone Line Long
(G) Pillow Switch (Optional)
(H) Air Switch (Optional)
(I) Teltex HS Smart Headset
SETUP
Step 1. Connect the Voice Dialer Power Supply from an Electrical Outlet
to the Voice Dialer Power jack.
Step 2. Connect the Voice Dialer Telephone Line Long cord from your home
Telephone Jack to the Voice Dialer Line jack.
Step 3. Connect the XLC3.4+ Power Supply from an Electrical Outlet to the
XLC3.4+ Base.
Step 4. Connect the XLC3.4+ Telephone Line Long cord from the XLC3.4+
Base to the Voice Dialer Phone jack.
Step 5. Connect the Teletex HS Smart Headset to XLC3.4+ Handset.
Step 6. Follow instructions of Voice Dialer to set up contacts.
Step 7. (Switch Control for Limited Mobility Clients). Connect the
optional Air or Pillow Switch to the XLC3.4+ Handset.
Step 8. Use the switch control to activate the HANDset. If using the
switch control, you must use the included HEADset to operate the XLC3.4+
Handsfree.
- To answer calls – Use the switch control to turn on the phone.
- To end calls – Use the switch control to turn off the phone.
- To make calls – Use the switch control to turn on the phone, and using the headset, activate the voice dialer to dial one of your contacts stored in the voice dialer module.
- To end calls – Use the switch control to turn off the phone.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>