Zamkol ZK202 Wireless Stereo Speaker User Manual

ZK202 Wireless Stereo Speaker
User Manual

Accessories

Parameters

Button Configurations

1. Volume +/ Next Track
2. Power ON/OFF ] Activate Siri
3. Volume -/ Previous Track
4. Ploy/Pause/Answer or Reject a Call / Mode Switch
5. Type-C| 6. Aux In
7. TF Cord Slot
8. Microphone
9. LED  Indicators
10. Rotate for Volume Up / Down
---|---

Functions

short press once to activate Sin on your phone:
Long Press| 1. When( S off, press 2s to turn on:
2. When it is Son, press 2s to turn it off.
3. Select one of the speakers and double-click the ‘POWER’ button to enter into the True Wireless Stereo Pairing Mode.
| Short Press| Volume up. 16 degrees in total.
Long Press| Next track.
| Short Press| Volume down. 16 degrees in total.
Long Press| Previous track
| Short Press| 1. In the music playing state: short press to play/stop:
2. In incoming calls state: short press to answer culls:
3. In answering calls state: short press to hong up:
Long Press| 1. Long press 2 s to switch modes: BT/TF/AUX
Z Long press 2 s to reject the incoming coils
3. Long press 5 s to clear purring information and you volt hear o voice prompt. then the speaker will power off automatically.
4. Long press 8 s to automatic reset and power off when the speaker is abnormal or crushed.
| Rotate on Right| Volume up.
Rotate on Left| Volume down.

LED Indicators Instruction

a. Blue indicator light flashes when the Bluetooth is pairing, and always on after Bluetooth is connected successfully
b. Under BT/TF modes, the blue indicator light is breathing while playing and lights up while pausing
c. When connect with a mobile phone, the blue indicator lights of secondary and master speakers are always on; blue indicator light of master and the secondary’s breathing while playing
d. When the speaker is being charged, the red indicator light turns on and the green indicator turns on when fully charged. When battery power slow red LED flashes

Bluetooth Pairing

Turn on the speaker and it is waiting for connection with flashing blue LED Turn on the Bluetooth of your device and search for ZKO and con­ next it

True Wireless Stereo Connection with Two ZK202

1. Turn on two speakers, please make sure these two speakers do not pair with other Bluetooth devices before you turn them on
2. Choose one of the speakers and quickly double click power key then you hear a voice prompt that indicates the speaker enters True Wireless St­ereo mode
3. When True Wireless Stereo is waiting to pair, blue LED indicators of master and secondary speakers are flashing
4. When they are paired successfully, a voice prompt will be heard. The blue LED of the secondary speaker is always on (right channel) other one flashes (left channel)
5. At this time, turn on the Bluetooth function of your device (mobile phone), search for a Bluetooth device name ZKO’ and connect it
6. After the mobile phone is connected, the blue indicator lights of seco­ dry and master speakers are always on; blue indicator light of master speaker and the secondaries is breathing while playing

AUX-IN connect to True Wireless Stereo

1. Turn on two speakers, please make sure these two speakers do, not pair with other Bluetooth devices before you turn them on.
2. Choose one of the speakers as master and the other one is used as secondary speaker quickly double click the power button of the master speaker to enter True Wireless Stereo
3. when they are paired successfully, a voice prompt will be heard The blue LED of the secondary speaker is always on (right channel) other one flash (left channel)
   4. Master speaker plug-in AUX cable, can connect with a mobile phone or computer to play music for true wireless stereo music

Activate Voice Assistant

When the speaker is in connection with a mobile phone, short press the power key to activate the voice assistant

TF Mode

1. Max support 64GB TF card
2. Insert the TF card properly the speaker will play the audio files auto­ matically
3. TF card support audio files: APE/ FLAC/ WAV/ MP3

AUX-IN Function

The speaker also features one AUX audio-in port, simply connect the speaker with your non-Bluetooth mobile phone/ MP3 player/ PC/ Laptop with the 3.5mm audio jack cable. Once the blue LED is on, then you can play music via a wired connection

Sleep Mode

The ZKO2 speaker will go into sleep mode after 20 minutes to save battery power if it does not have any operation when you need to use it, press the Power ON/ OFF button to turn it on

Tips

Because of the power output of this speaker, please do not be too close to the speaker and keep an appropriate distance away to listen to the music. To avoid any discomfort caused by excessive sound, it is recommended to listen to music at a suitable volume

Please keep this manual handy for future reference

To clean the ZK202 Bluetooth speaker use a lightly dampened cloth in water to clean the exterior in case it gets dirty Do not use any form of detergents or cleaning material to clean this speaker, any type of chemical may make this device unusable. Do not disassemble this product. It con­ contains no user- serviceable parts. Do not drop or jump on it, treat it with care for the best performance. Keep the speaker binary location. Dust dirt & moisture from humidity can accumulate on the body of the speaker if kept at an unfriendly place. Do not dispose of this product in fire, batters may explode or leak

FCC Statement

Changes or modifications not expressly approved by the party respon­ sible for compliance could void the user’s authority to operate the equip­ ment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be deter­ mined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interfer­ ence that may cause ndesiredopertion

DOC
Learn more about the UK Declaration of Conformity, please click the below link to download:
https://www.zamkol.com/upload/doc/ZK202-DOC-UK pdf

Hereby. [SHELLBOT TECHNOLOGY FR] declares that the radio equipment type [Wireless Stereo Speaker 7KO]is in compliance with Directive 2014/53/EU. The full text of the EU declaration conformity is available at the following internet address
https://www.zamkol.com/upload/admin/20210402/27K202-DOC-EN.pdf

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>