Edinburgh 4015495 Deluxe Auto Rocker CO Sleeper Instruction Manual
- June 4, 2024
- Edinburgh
Table of Contents
DELUXE AUTO ROCKER CO SLEEPER
INSTRUCTION MANUAL
IMPORTANT! RETAIN FOR FUTURE REFERENCE READ CAREFULLY
IMPORTANT. KEEP FOR FUTURE REFERENCE. READ CAREFULLY
- WARNING: Do not use this product without reading the instructions first.
- WARNING: The cot should no longer be used when the child can sit up, kneel up or stand up unaided.
- WARNING: Placing additional elements in the cot may cause asphyxiation.
- WARNING: Do not place the product near any other products that could cause a danger of asphyxiation or strangulation, for example, strings, curtains, cords, etc.
- The assembly elements must always be securely fastened and inspected. This is to ensure they do not collapse and to prevent any of the elements from coming loose. This is important to avoid your child or your child’s clothing being trapped and causing strangulation.
- The crib should always be placed on a horizontal floor.
- Gaps should not be filled with pillows, blankets, or other items.
- DO NOT let children play near the crib without supervision.
- When the child is unsupervised in the crib, make sure that the rail is always up, correctly fastened in place, and that the zips are fully closed.
- DO NOT use the product if any of the parts are broken, damaged, or missing. Contact Baby Factory for replacement parts and extra instructions if necessary. DO NOT replace any of the parts yourself.
- DO NOT use accessories that have not to been approved by the manufacturer.
- Make sure that all of the assembly devices are correctly fitted, as well as the locking devices.
- Never use the cover without the metal structure.
- WARNING: To avoid the risk of your child’s neck being caught on the top rail next to the adult bed, please ensure this rail is not higher than the adult bed mattress.
- WARNING: To avoid the risk of strangulation, the attachment system to the adult bed 7.-41 electrical cables should always be kept out of the crib and out of reach.
- WARNING: Do not use more than one mattress in the crib.
- WARNING: To prevent the risk of fire: avoid placing the crib close to a fire or other sources of heat, such as electric or gas heating devices, etc.
- To avoid the risk of falls and suffocation, never put two or more mattresses in the cot.
- WARNING: Only use the mattress that comes with the crib.
- DANGER! Always raise the drop side up completely when the crib is not attached to the adult bed.
- DO NOT use the crib with the following types of adult beds: -The adult bed height is less than 49cm from floor to top of the adult mattress. -The adult bed width is more than 180cm.
- WARNING: This bedside sleeper is suitable for a bed with an independent bed edge component, which can be attached with the anchor strap from the bedside sleeper.
- WARNING: Never add a sleep aid to the crib that is higher than the red line printed on the lining of the crib.
- WARNING: This product is intended for use for babies aged between 0 -6 months, weighing up to a maximum of 9 kg
Parts List
Assembling the crib
- Connect all 4 legs to both of the end support units
- Connect the 2 end support units together using the round bars
- Feed the basket bars through the fabric and connect them to the end support units
- Line the frame up with the support unit
- Sit the frame onto the clips coming up from the end support units
- Press in the locking clip in order to connect the frame to the support units on both sides
- Under the body of the crib, connect the base of the crib to the clips on both ends.
Instructions
Adjusting the height
a) release the lever on both sides of the crib and
b) lift up or let down the height of the crib unit. This can also be angled to
help with reflux
Co-Sleeping
Co-Sleeping mode
a) Lower the zip on the inside of the crib on both sides to the bottom
b) press the buttons under the frame on both sides and slide the frame upwards
until it is released from the clips.
c) allow the section to hang.
Co-Sleeping mode
d) Adjust the height of the crib so the top of the lowered section is below or
in line with the top of your mattress
WARNING
Co-Sleeping mode should not be used if the adult mattress is lower in height
than the lowest section of the dropped side of the crib.
Co-Sleeping mode
e) Lock the glide function by engaging the stoppers on both sides of the crib.
f) Using your hand, pull down the stoppers seen in the images above.
g) Connect the bed straps provided around the base of your bed and connect
them to the base of the crib
WARNING
Always ensure there is no more than a 2cm gap between your mattress and the
side of the crib.
fixing to adult bed for
15. with the crib rail in the lower position, place the crib close to the bed. Check the height of the sleeper against the height of the bed. The height of the open side edge of the crib should always be aligned with or lower than the height of the bed mattress.
| 
---|---
|
16. To fix the sleeper securely to the bed, pull the anchor straps from under the bedside sleeper and slide them under and over the bed base. Lock the buckles under the bedside sleeper and tighten the straps until the sleeper is firmly attached.
safety information
Control Panel
ON/OFF
Pressing once switches the unit on and off.
GLIDE LEVEL
The Co-Sleeper has 3 levels. Pressing once moves it to the next speed.
WARNING-Always ensure the glide stoppers are not in place before switching on.
SOUND
The Co-Sleeper comes with 3 pre-loaded songs built into it. Pressing once
plays the first song Press and hold to move to the next track. Track 3 is
white noise
VOLUME
The volume is controlled by the arrows above the sound button.
TIMER
The glide function can be set on the timer for 15 mins or 30 mins. Pressing
once will change the time.
Remote Control
Imported & Distributed by Baby Factory (NZ) LTD
58 Stonedon Drive, East Tamaki, Auckland, New Zealand
www.babyfactory.co.nz
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>