importvet Tecnoscan SC App Instruction Manual
- June 6, 2024
- importvet
Table of Contents
importvet Tecnoscan SC App Instruction
Press and hold the power button on the scanner until the blue LED switches on.
Download the Tecnosc Connect app from Google Play Store or the App Store Once
downloaded launch the app. To activate the scanner successfully you will need
to ensure your scanner is charged and that you have an internet
connection.
- App request to connect scannerNote if the Wi-Fi LED flashes on the scanner it is not connected to any smart device.
- Select Tecnoscan SC from the Wi-Fi page
- App requests to connect to the internet
- Select your local Wi-Fi network to connect to the internet
- App requests to connect back to the scanner
- Select Tecnoscan SC from the Wi-F page
Normal start up process
After a few seconds, the ultrasound image will appear. Touch anywhere on the screen to bring up the live scanning menu.
Settings menu
Backfat
measurement function
Calipers mode
Cine loop menu
LED sequence
Power LED
- Blue flashing: Scanner turning on
- Blue: Scanner on and battery between 66–100% charge
- Yellow: Scanner on and battery between 33–66% charge
- Yellow flashing: Scanner on and battery between 0–33% charge
Wi-Fi LED
- Blue flashing: Scanner ready for smart device to connect, nothing connected
- Blue : Smart device connected
- Blue: Scanner is charging when placed on wireless charging plate
Both LEDs
Yellow flashing: Software updating
Power saving mode
Freeze mode
This function allows you to freeze a live ultrasound image. It will also allow
you to review the previous
10 secs of scanning through the app’s cine loop functionality. This is good if
your sow has run off!
All images and clips can be saved in the app by pressing the save icon.
Saved images
All images and video clips are stored in the smart device’s photo and video
gallery.
Care & maintenance
We have built the Tecnoscan SC to be rugged and water resistant. It does
however contain fragile sensitive electronics.
Tecnoscan SC housing is water resistant enough for gentle washing and rinsing.
It will not withstand powerful jets of water (e.g. tap full on or hosing it
down).
Charging
The scanner is charged via a wireless induction plate. To charge the scanner place it on the plate, with the charging symbol facing down. The scanner should be charged in a cool environment, ideally around 20 ˚C. When the LED turns off the scanner is fully charged. Tecnoscan SC is compatible with all WPC Qi-v1.2 compliant wireless chargers and has been certified using chargers with an output up to 5V/1A and a charge frequency of 110kHz to 190kHz.
Specification
- Size: 235 mm x 50 mm x 70 mm
- Weight: 246 grams
- Power: Lithium battery, 3 hours
- Sealing: Splash & dust proof
- Operating temperature: -20 ˚C to 35 ˚C
- Frequency bands: 16.1
- Number of crystals: 64
Scanner operating frequency bands: B1=2412MHz-2462MHz and B2=5150MHz-5250MHz.
Maximum radio-frequency power transmitted in the frequency bands: 16.1dBm for
B1 and 18dBm for B2.
Certification
Note: All Tecnovet products are for animal applications only. The product
shall not be used outside its scope as declared by the manufacturer. Hereby,
Tecnovet, declares that the radio equipment type Tecnoscan SC is in compliance
with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address:
www.imv-technologies.com.
FCC – This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
If the user changes any modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
This device complies with Industry Canada’s licence-exempt RSSs. Operation is
subject to the following two conditions:
- This device may not cause interference; and
- This device must accept any interference, including interference that may cause undesired operation of the device.