motorola Motobuds Charge Moto Buds Charge User Guide
- June 6, 2024
- Motorola
Table of Contents
Quick Start Guide
Model No. : Motobuds Charge, MOTO BUDS CHARGE
FCC ID: 2ARRB-MBCHR
IC: 20353-MBCHR
Frequency Band: 2.402 – 2.480GHz
Maximum RF power: 6 dBm
Working temperature: -10°C ~ 45°C
Charging:
Fully charge before use
The device can be powered through a USB-C from any CE compliant power source
that implement the European interface as requested by EN 301 489-52.
Pairing:
-
Ensure both buds are inside the charging case and take out both buds. The buds will flash blue and red.
-
Select “Motobuds Charge” from the smartphone Bluetooth menu.
Fitting:
-
To optimize the best fit and audio experience, it is recommended to try different earbud sizes.
-
Insert the Motobuds into your ear and rotate to fit comfortably.
Basic Operation:
Additional Operation
Factory reset| 1. Ensure earbuds are not connected to phone
2. Double press MFB and then hold MFB for 5 second until LED shows blue and
red
3. Put both buds into the charging case
Reject a call| MFB 2sec
Receive incoming and on hold ongoing call| Single Press MFB
LED Indicator
Pairing| Red-blue flash
Standby| Blue flash
Charging| Red steady
Fully charged| Off
Battery low| Red flash