BRESSER 7009992 3CH Thermo-Hygro Sensor Instruction Manual
- June 6, 2024
- BRESSER
Table of Contents
BRESSER 7009992 3CH Thermo-Hygro Sensor
General Warning
DANGER!
This device contains electronic components which operate via a power source
(power supply and/or batteries). Do not let children use the device while
unattended. Only use the device as described in the manual, otherwise, you run
the risk of an electric shock. Children should only use the device under adult
supervision. Keep packaging material, like plastic bags and rubber bands, out
of the reach of children, as they pose a choking hazard.
Keep batteries out of the reach of children. Make sure you insert the
batteries correctly. Empty or damaged batteries could cause burns if they come
into contact with the skin. If necessary, wear adequate gloves for
protectionDo not expose the device to high temperatures. Use only the
recommended batteries. Do not short-circuit the device or batteries, or throw
them into a fire. Excessive heat or improper handling could trigger a short-
circuit, a fire or an explosion!
Bresser GmbH
Gutenbergstr. 2
DE-46414 Rhed Germany
Service:
Web: www.bresser.de/weather E-Mail:
[email protected]
NOTE
Do not disassemble the device. In the event of a defect, please contact your
dealer. The dealer will contact the Service Centre and can send the device in
to be repaired, if neces-sary.
Use only the recommended batteries. Always replace weak or empty batteries
with a new, complete set of batteries at full capacity. Do not use batteries
from different brands or with different capacities. The batteries should be
removed from the unit if it has not been used for a long time.
NOTES ON CLEANING
Separate the device from the power supply or remove the batteries before
cleaning.
NOTE!
Only use a dry cloth to clean the exterior of the device. Do not use any
cleaning fluid to avoid damaging the electronics.
SCOPE OF DELIVERY
- Outdoor sensor,
- instruction manual
- Batteries required (not included): 2 pcs. Batteries (1.5V, type AA)
FEATURES OF THE REMOTE UNIT
-
A DISPLAY (ON FRONT SIDE)
Displays temperature, humidity, current channel and low battery warning symbol [ ]. -
B WALL MOUNT
For mounting the sensor on walls. -
C SET THE TRANSMISSION CHANNEL (1-3)
Input channel for the weather station. Set the channel before inserting the batteries. -
D TX (TEST)
TEST key transmits the current measured values. -
E °C / °F – BUTTON
°C/°F button switches between Celsius (°C) and Fahrenheit (°F). -
F BATTERY COMPARTMENT
Unit requires 2 pcs. “AA” 1.5V (LR6) batteries -
G STAND
For positioning the device on a flat surface
„Batteries empty“ indicator
When batteries are nearing depletion, the symbol [ displayed on the sensor and
weather station.
DISPOSAL
Dispose of the packaging materials properly, accor-ding to their types, such as paper or cardboard. Contact your local waste disposal service or environmental authority for information on the proper disposal.
Do not dispose of electronic devices in the household garbage! As per the Directive 2002/96/EC of the Euro-pean Parliament on waste electrical and electronic equipment and its adaptation into German law, used electronic devices must be collected separately and recycled in authority for information on the proper disposal.
In accordance with the regulations concerning batteries and rechargeable batteries, disposing of them in normal household waste is explicitly forbidden. Please make sure to dispose of your used batteries as required by law — at a local collection point or in the retail market. Disposal in domestic waste violates the Battery Directive. Batteries that contain toxins are marked with a sign and a chemical
- battery contains cadmium
- battery contains mercury
- battery contains lead
EC DECLARATION OF CONFORMITY
Hereby, Bresser GmbH declares that the equipment type with part number:
7009992 is in compliance with Directive: 2014/53/EU. The full text of the EU
declaration of conformity is available at the following internet address:
www.bresser.de/download/7009992/CE/7009992_CE.pdf
UKCA DECLARATION OF CONFORMITY
Hereby, Bresser GmbH declares that the equipment type with part number:
7009992 is in compliance with the relevant Directive on UKCA conformity. The
full text of the UKCA declaration of conformity is available at the following
internet address:
www.bresser.de/download/7009992/UKCA/7009992_UKCA.pdf
TECHNICAL DATA:
Measurement
- Temperature range: -40 – 70 °C (-4 – 158 °F) Temperature steps: 0.1 °C/°F
- Humidity range: 20 – 95% RH
- Humidity steps: 1%
- Transmission frequency: 433,92 MH Maximum transmission power < 10m
- Transmission range: 50 meters (free field)
- Power supply 2x AA 1.5V batteries (not included