Flashquark Horizon Z Outemu Silent Sky Switches Keyboard User Manual
- June 6, 2024
- Flashquark
Table of Contents
Flashquark Horizon Z Outemu Silent Sky Switches Keyboard User Manual
Flashquark Horizon Z Outemu Silent Sky Switches Keyboard
Charging
- “Fn” key backlight LED will flash red repeatedly when keyboard battery power is low.
- The space bar backlight LED will light up red while battery is charging.
- Once the battery has been fully charged, red space bar LEO will shut off
- Backlights will automatically shut off after 1 minute without use. After 30 minutes without use, the keyboard will enter standby mode and disconnect from bluetooth. Press any key to wake the board and resume use.
Bluetooth Connection
Fn + R: Toggle between wired/bluetooth modes
Fn + Q/W/E: Set bluetooth profile, supports up to 3 bluetooth connections
Bluetooth Pairing
- Set switch on the back of the keyboard to the “On~ position.
- Press and hold Fn + Q/W/E for 3-5 seconds. The “R”key LED will begin to flash repeatedly to indicate that the keyboard is ready to connect to a new device over bluetooth.
- On the device you wish to connect to, begin to search for bluetooth devices and select HBluetooth Keyboard” once it appears on the device.
- Once the keyboard has connected to the device, the ~w key will stop flashing to indicate successful bluetooth pairing.
- The keyboard can support bluetooth connections for up to 3 devices. Long press Fn + Q/W/E to set up a connection to a new device. Short press to connect to a previously paired device that
is associated with a particular profile.
Key Functions
The keyboard supports dual function operation and is 100% compatible with
Windows and Mac OS. The keyboard has N-key rollover for detection of all
keypresses.
Fn + Left Ctrl :Toggle between top row Fl-Fl 2 function row keys or numbers.
When the keyboard is in function row key mode, left Ctrl key LED will be
white.
Backli ht Settings
Fn + 1/O/P: Switch backlight modes. Each key has 6 different modes for a total
of 18 backlight modes.
Fn + > : Increase LED brightness
Fn + < : Decrease LED brightness
Fn + [ : Increase LED effect speed
Fn + J : Decrease LED effect speed
Fn +; : Change LED effect direction
Fn + ” : Change LED color
Fn + Z/X/C : LED macro recording keys
Backlight Macro Recording
- Press Fn + Z/X/C. Each key can store one backlight mode macro.
- Press Fn +Tab.The Ctrl, Caps, and Windows keys will flash repeatedly to indicate that backlight macro recording has begun.
- Press the keys that you wish to set backlighling for.
- Press Fn + Tab again to stop backlight macro recording. The Ctrl, Caps, and Windows keys will stop flashing and custom backlight settings will be saved to the chosen profile.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>