bel canto Black EX Integrated Amplifier User Guide

bel canto Black EX Integrated Amplifier

We are proud to present to you the BLACK EX Integrated by Bel Canto. This product is the result of our passion for the ultimate realism in audio playback. It represents over 20 years of research and development. BLACK is a highly integrated amplifier system containing sophisticated digital and analog circuitry and software control to ensure ease of use and perfect signal transfer. Bel Canto BLACK is a promise to deliver a compelling musical experience from any source. We wish you many years of musical enjoyment.

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written
permission of Bel Canto Design. The content of this manual is provided for information use only, is subject to change without notice, and should not be construed as a commitment by Bel Canto Design Limited. Bel Canto Design Limited assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual. Bel Canto Design Limited disclaims any proprietary interest in trademarks and trade names other than its own. Printed in the United States.

Important Safety Instructions

Explanation of symbols used in this manual or on the rear /underside of the apparatus:

• The Lightning Flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product enclosure that may be of sufficient magnitude to constitute a risk of shock to persons.
• The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

TO COMPLETELY DISCONNECT THIS APPARATUS FROM THE AC MAINS, DISCONNECT THE POWER SUPPLY CORD PLUG FROM THE AC RECEPTACLE

• THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL REMAIN READILY ACCESSIBLE.
• Disconnect supply cord before changing fuse.
• Refer servicing to qualified service personnel.
• WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE AND OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHOULD NOT BE PLACED ON THIS APPARATUS.
• Read, keep and follow these instructions
• Heed all warnings.
• Do not use the apparatus near water, e.g. near a bathtub, kitchen sink, laundry tub, in a wet basement, near a swimming pool etc.
• Clean only with a dry cloth.
• Install in accordance with the Manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
• Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet; consult an electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and at the point where they exit from the apparatus.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as powersupply cord or plug has been damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
• Mains plug: Use the mains plug to disconnect the apparatus from the mains supply. The mains plug must be accessible at all times. Use the mains switch (if applicable) when the apparatus is not in use.
• Do not expose the apparatus to liquids or moisture, dripping or splashing. Do not place a vessel containing liquid on top of the apparatus.
• No naked flame sources, such as lighted candles, should be placed on the apparatus.
• The apparatus has been designed for use in moderate and tropical climates

In the UK
Fuse replacement: This appliance is fitted with a non-rewireable 10 amp mains plug The plug contains a 1 O amp fuse. If the fuse has blown it can be replaced as fol lows: 1) Pull out the black fuse cover /carrier. 2) Remove and dispose of the blown fuse. 3) Fit a new 1 O amp BS 1362 approved fuse into the carrier and push the carrier back into the plug. Always ensure the fuse cover is fitted. If the fuse cover is missing do not use the plug. Contact your Bel Canto retailer to obtain a replacement fuse cover. Fuses are for fire protection and do not protect against electric shock.

WARNING: THIS APPLIANCE MUST BE GROUNDED

FCC Notice

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warranty Information

Bel Canto products are automatically covered by a 90 day factory warranty that covers all internal parts and labor. Register online (http://www.belcantodesign.com/home/support/warranty-registration/black/) within 30 days of purchase from an authorized dealer to automatically extend your warranty for 5 years starting from the date of purchase. If you do not have web access, please contact your dealer for assistance. Upon fully completing registration, within 5 business days you will receive an email that officially validates your warranty. Your information will be used for internal use only and will not be sold or released outside Bel Canto. Your comments and suggestions are appreciated and help us continually improve our products and services.

The warranty is only valid to the original owner and is non-transferable. Damage caused by unauthorized modification, abuse, or neglect of product will void your warranty. Any cost associated with return of product is the sole responsibility of the owner. All returns require a return authorization number issued after contacting us at info@belcantodesign.com. If you have any questions, please feel free to contact us online at info@belcantodesign.com.

Unpacking the EX INTEGRATED

Carefully inspect each item for any visual damage. If there is any damage, or anything missing from the list below, please contact your dealer or distributor.
The below items are shipped with your system:

• 1 (one) – EX INTEGRATED Asynchronous Control Integrated
• 1 (one) – BLACK User’s Guide
• 1 (one) – Remote Control
• 1 (one) – IEC Power Cable
• 1 (one) – BNC/RCA Adapter

IMPORTANT: Save all packing materials as they are specially designed to protect the EX INTEGRATED during transportation. If the packing materials are compromised, contact your dealer, distributor, or Bel Canto for proper packaging before attempting to ship your EX INTEGRATED.

Power Connection
The power supply in the EX INTEGRATED is preset for the proper power voltage. The power cable should have the correct plug for your local power system. If you believe this to not be true, please contact your dealer immediately. This product, like any electrical component, can be dangerous and cause injury unless correct handling procedures are observed and used. Before powering this product, it is necessary to read and follow proper setup and procedures.

Setup & Placement

The EX INTEGRATED can be placed in many locations without compromise. We do not recommend placing weights or other objects directly on EX INTEGRATED. This may scratch or mar the chassis finish. Do not use harsh chemicals or abrasives when cleaning the outside of your EX INTEGRATED.
Use a clean microfiber cloth to remove fingerprints from the chassis.
Single Ended RCA and Balanced XLR connect ors are available. XLR connectors follow the standard AES pin configuration:

• Pin 1 Ground
• Pin 2 Signal +
• Pin 3 Signal –

We recommend placing the EX INTEGRATED in an easily accessible location near your source components.

System Connections

1. NextGen Loudspeaker Connectors are optimized for sound quality with any good spade or NextGen banana connector. Note that the NextGen connector is clutched to ensure optimum pressure on the contact. – Do not over tighten- The NextGen connector creates a tight and damped contact preventing chatter and contact noise at the connection to the loudspeaker. Outputs are compatible with any loudspeaker down to 2 ohms.
2. Ground Lug is provided to attach the ground wire from your turntable.
3. MM/MC Phono Input for your phono cartridge. Gain and load settings are available through Program Mode.
4. Analog Inputs are 2V line level and support a variety of analog sources. Each of these inputs can be set for HTB (Home Theater Bypass} with a fixed volume setting of 84.0 applied for use with a home theater preamplifier output.
5. Analog Outputs can be used to feed a powered subwoofer or other devices, 4.5Vrms Max out.
6. RS232 allows control from any compatible controllers.
7. AES XLR Input accepts digital signal with data rates up to 24 bit 192 KS/s.
8. SPDIF Input accepts digital signal with data rates up to 24 bit 192 KS/s.
9. TOSLINK Input accepts digital signal with data rates up to 24 bit 192 KS/s.
10. USB Input accepts digital signal with data rates up to 24 bit 384 KS/s, MQA, and 0S064/1 28 in DoP format.
11. USB A Input is used to connect to an external FAT32 formatted USB storage device. Use the SEEK app to stream music from the connected drive. The EX INTEGRATED can support Bus Powered USB drives up to 1 amp or any externally powered USB storage device.
12. Ethernet Input accepts digital audio data rates up to 24 bit 192 KS/sand 05064 in DSF format. This input supports MQA, is UPnP/DLNA compatible and a ‘Roon Ready’ endpoint. Roon is a sophisticated and friendly means to access your music collection and stream Tidal, including Tidal MQA material from the internet. We recommend that you investigate Roon’s capabilities with the knowledge that you will be getting the best audio performance possible through our ‘Roon Ready’ network interface. More info at https://roonlabs.com/
13. Mains Power Switch connects AC input to the power board when set to the I position.
14. I EC Inlet. Region specific voltage is internally set.

*MQA (Master Quality Authenticated) is an award-winning British technology that delivers the sound of the original master recording. The master MQA file is fully authenticated and is small enough to stream or download.
Visit mqa.co.uk for more information.
The MQA logo is a trade mark of MQA Limited.© MQA Limited 2017
Black includes MQA technology, which enables you to play back MQA audio files and streams, delivering the sound of the original master recording. The display will show “MQA” when playing an MQA stream or file or “MQA.” for an MQA Studio file, which has either been approved in the studio by the artist/producer or has been verified by the copyright owner.

EX INTEGRATED Control and Display Options

You can select inputs, adjust volume, and program the EX INTEGRATED by using any of the remote control or the wheel.
Additionally, you can manage your music library, networked or USB A connected devices, and TIDAL using the Bel Canto SEEK app for iOS.
The default display will show the selected input on the left and the volume on the right.

The EX INTEGRATED has several additional display options. Pressing the ‘Display’ button on the remote will cycle through the options available for the selected Input. The display may also be turned off by pressing the ‘Display’ button until the display is no longer illuminated.

EX INTEGRATED Programming

The EX INTEGRATED has an abundance of features that can be accessed in programming mode. To begin programming via the remote: press the ‘Program’ button in the upper right of the remote.

For programming via the wheel:

Programming Options

Tilt control centers at 775Hz and tilts the frequency spectrum up or down in 0.6dB increments (-5, OFF, +5), to a maximum of +/-3dB. This control allows you to finely tailor the overall tonal balance of your system to optimally match your room, your loudspeakers, and your personal taste without compromising the sonic integrity of the original signal.

Bass EQ control operates over a +/-3dB range with 0.6dB increments (-5, OFF, +5), providing subtle optimization of your system bass energy.

Main HP is used to set a 2•1<1 order High Pass Filter for the main loudspeaker output to better integrate a subwoofer. The frequency range is 40Hz to 120Hz in 10Hz increments or OFF for no HP filter.

Programming Options

Sub LP: OFF
Sub LP is used to set a 2nd order Low Pass filter for the Analog Line output to better integrate a subwoofer. Frequency range is 40Hz to 120Hz in 1 OHz increments or OFF for no LP filter.\

Sub Gain: 0
Sub Gain on the Line output is adjustable from -6dB to +6dB in 1dB steps.

Phono: 5mV
Select the setting that is appropriate for your cartridge

Download the SEEK app onto your iOS device to control your networked music library, Drop box files, or stream TIDAL.

1. Network interface device setup and firmware update for renderer
2. Device information
3. Timeline and repeat, shuffle options
4. Transport
5. Mute
6. Master volume
7. Micro-volume toggle
8. Main menu options
9. Refresh the connection to the network
10. Available network devices
11. Connected device
12. USB-A connection

221 pt Street North, Suite 300
Minneapolis, MN 55401
P: 612.317.4550
info@belcantodesign.com
http://www.belcantodesign.com
‘2020 Bel Canto Design, LTD

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>