Smart Wave Technologies B01-007B Module User Manual
- June 6, 2024
- Smart Wave Technologies
Table of Contents
B01-007B
User Manual
Revision 2.1
January 18, 2022
NOTICE TO READERS
This document contains proprietary information which is the property of
SMART WAVE TECHNOLOGIES CORP.
CONFIDENTIAL
Except for the right expressly granted in writing, this document may not, in whole or in part, be duplicated or disclosed without the prior written permission of Smart Wave Technologies Corp.
PRODUCT DESCRIPTION
The B01-007B is bait station trap detection device used to indicate whether the trap is in an open or closed state and to assign a timestamp for when the trap is detected is closed. The device uses a hall sensor to determine if the trap is closed utilizing a magnet in the trap housing. The B01-007B connects to a mobile phone app, via Bluetooth, to send this information and the phone will upload this to a cloud server.
PRODUCT INSTALLATION
The B01-007B is installed in a plastic housing and sonically welded to provide complete protection from the various installation environments and rodents. A CR-123 or CR2477 battery (housing dependent) must be connected to the B10-007B before installation into plastic housing
PRODUCT OPERATION
Once powered, the device will advertise for 30 seconds before going to sleep. Closing and opening the trap will wake the device up and it will again advertise for 30 seconds before going back to sleep. This operation will happen for device that are unregistered (Factory Mode).
For devices that are registered and installed in the field, the device will continually advertise every 1.5 seconds
REGULATORY INFORMATION
CANADA
ISED Regulatory Statements
IC: 24934-B01007
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause undesired operation of the device.
CAN ICES-3 (B)/NMB-3(B)
Regulatory information in the App can be accessed from the main screen
(Dashboard) by performing the following steps:
(1) Access the Site Menu (upper left corner of the App screen)
(2) Select “About Us” from the Site Menu
(3) Tap the button labeled “Regulatory”
USA
FCC Regulator Statements
FCC: 2ASYW-B01007
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTICE:
End user must include the following on the label of the end product
Contains:
FCC ID: 2ASYW-B01007
IC: 24934-B01007
This is the Last Page of this Document
01/18/2022 B01-007B User Manual Rev2.1