SACKit SI-BOOM150-BL BOOM 150 Portable Speaker User Manual

SACKit SI-BOOM150-BL BOOM 150 Portable Speaker User Manual

THANK YOU!

Thank you for purchasing this SACKit Boom 150 high power portable design speaker from SACKit. Please read the entire user manual before using the product and save it for future reference. We reserve the right for any errors in text or images and any necessary changes made to technical data. If you have any questions regarding technical problems, please contact our customer services on info@sackit.dk. We hope you will enjoy your new SACKit Boom 150 speaker.

Enjoy great sound on the SACKit Boom 150 !

BOX CONTENTS

1x SACKit Boom 150 speaker
1x Quick start guide
1x AC power adapter

QUICK START GUIDE

1. Connect the speaker to a power source and charge at least 6 hours to obtain full battery capacity.
2. Turn on speaker by turning the Volume/ON button clockwise.
3. Turn on Bluetooth on the device you want to connect.
4. Choose “SACKit Boom 150” in the Bluetooth settings on your device. Enter pin ‘0000’ if asked.
5. Start playing music from your device.
6. To disconnect the existing device connected to your SACKit Boom 150 double click ”Source” button.

PRODUCT OVERVIEW

PRODUCT DESCRIPTION

The front of SACKit Boom 150

Volume/ON/OFF: Switch speaker on/off and control volume. Turning clockwise increases volume and vice versa.

Bass dial : Controlling bass level. Recommended start setting is with indicator facing upwards.

Treble dial : Controlling treble level. Recommended start setting is with indicator facing upwards.

Bluetooth/AUX LED : Blue blinking = searching for Bluetooth unit. Blue constant light = connected to Bluetooth unit. Green constant light = receiving line in signal through ‘Line in/out’.

Power LED : When charging:
• Constant red light = charging.
• No light = Unit turned on, unit turned off or no charging of batteries.
• Dimmed red light = Low power, please recharge.

Source button:
• Single press = Switch between ‘Line in’ and ‘Bluetooth‘ input. The speaker will always turn on at the latest setting, and if it was Bluetooth, it will connect to the latest device.
• Double click = Disconnect connected device.
• Long press (3 seconds) = Connect to another SACKit Boom 150 in wireless stereo. If connected already and you long press ‘Source’ you will disconnect the other SACKit Boom 150.

The back of SACKit Boom 150

Charging plug : Connector for charging your speaker. Always use the supplied charger.

Line in / out : Mini-jack connector. Use this dual function connector for:
• When in Bluetooth mode, use this to transfer the speakers signal to other units by cable.
• When in AUX mode, use this to receive signal from another unit.
Note : Can be used to connect two SACKit Boom 150 with a mini-jack connector

USB-power outlet : Use this port for charging your phone or similar with the large internal battery.
Bass reflector port: Increase bass. Do not block or fill the port as this will impact the sound quality.

BATTERY AND CHARGING

Please use the adaptor supplied with SACKit Boom 150 for charging, the adaptor power is 15V/2A.
Do not use any other power adaptor.

• Before use you should charge the speaker for at least 6 hours to obtain full battery capacity.
• If the speaker is fully discharged it will take 3 hours to fully charge the internal battery.
• When charging the power led will illuminate and will turn off when fully charged.
• Please remember to turn off the speaker when not in use.

BLUETOOTH CONNECTION

1. Turn on speaker by turning the Volume/ON button clockwise.
2. Turn on Bluetooth on the device you want to connect.
3. Choose “SACKit Boom 150” in the Bluetooth settings on your device. Enter pin ‘0000’ if asked.
4. Start playing music from your device.
5. To disconnect the existing device connected to your SACKit Boom 150 double click ”Source”.
6. If you have two SACKit Boom 150 connected in wireless stereo, you need to disconnect the second speaker before you will be able to disconnect your device.

CONNECT TWO SACKIT BOOM 150 IN WIRELESS STEREO

It is possible to create a stereo pair between two SACKit Boom 150 speakers.

1. Turn on one speaker and connect to it to your phone or other device with Bluetooth, this SACKit Boom 150 will be the left speaker in the stereo setup.
2. Turn on the second SACKit Boom 150.
3. Press and hold the “Source” button on the first SACKit Boom 150 until you hear a sound and the LED on both SACKit Boom 150 turns blue.
4. The two SACKit Boom 150 are now paired in stereo.

Disconnect : To disconnect the paired SACKit Boom 150, press and hold the “Source” button on any of the SACKit Boom 150 until you hear a sound and the “Source LED” on the second SACKit Boom 150 begins to blink.

LINE IN MODE

Connecting the speaker to another unit using line in.

• Connect a mini jack connector (not included) first to the source then to your SACKit Boom 150.
• Turn on your speaker by turning the volume button.
• If the ‘AUX/Bluetooth’ LED is bright blue (indicating Bluetooth connection), press the ‘source’ button once and the ‘source LED’ will go from blue to green (indicating line in mode).

CONNECT TWO SACKIT BOOM 150 WITH LINE IN

Two SACKit Boom 150 can be connected through AUX / line in. If connected with another SACKit Boom 150 the second one will replicate the output  double effect.

1. Connect the first SACKit Boom 150 with a device through Bluetooth.
2. Insert the AUX cable in the first SACKit Boom 150.
3. Turn on the second SACKit Boom 150 and press the “Source” button until Bluetooth/AUX led turns green.
4. Plug in AUX cable in second SACKit Boom 150t, and turn up the volume to max.

This function allows you to connect up to four SACKit Boom 150 together. First pair two SACKit Boom 150 with Bluetooth, then connect each of those SACKit Boom 150 to another set of SACKit Boom 150 using the line in method described above.

POWER BANK FUNCTION

1. Turn on SACKit Boom 150
2. Use a compatible USB cable and connect to your device you wish to charge.
3. Max output is 5V/1.5A.

CLEANING THE SPEAKER

• Please turn off the speaker before cleaning.
• Use only water and a mild detergent on a damp cotton or microfibre cloth for cleaning the speaker.
• Do not use any solvents or similar to avoid damaging the surface.
• During cleaning please take extra care not to spill water in any of the connectors.

TROUBLESHOOTING

No sound

• Please check if the speaker is charged or connected to power
• Try to increase volume in the ‘Volume/ON’ dial. You increase volume by turning clockwise.
• Try to turn up volume on the device connected to the speaker.
• If connected by line in, please check if mini jack is properly inserted.

No charging

• Please check if charger is fully connected.

Failed Bluetooth connection

• Please check if speaker is in pairing mode (blinking ‘AUX/Bluetooth’ LED).
• If you are not in pairing mode, double click the source button as this will disconnect any unit and start pairing again.
• The units must be within 8 meters of each other.

Cannot disconnect from Bluetooth device

• If two SACKit Boom 150 are connected in wireless stereo, you cannot disconnect your device through the speaker controls. Disconnects the second SACKit Boom 150 by pressing and holding ‘Source’ on the second SACKit Boom 150. When this is disconnected, you can disconnect the first SACKit Boom 150 from your device.

IMPORTANT SAFETY INFORMATION

Product malfunctions due to incorrect use of the product is not covered by the warranty.

WARNING : To avoid fire, injuries or electrocution please follow the instructions.

• You are not allowed to open the product or replace parts of the unit. Contact a qualified service center if the product malfunctions.
• Do not subject the speaker to wet, moist or excessively dusty environments, as this may cause damage.
• Never use abrasive cleaners or chemical solvents as this can damage the product.
• Do not expose the product to excessive heat, direct sunshine, flames or similar.
• Do not place lit candles or open flames on the product.
• Do not use excessive force or violence when operating the buttons and dials of the speaker.
• Do not place the product in a confined space during use, make sure there is amble air around it.
• If the product has been stored in a cold location, please allow it to reach room temperature before connecting it to a power source.
• If disposing of the product, please obey local rules and regulations. The product contains electronic components and batteries and must be disposed of responsibly to avoid negative consequences to the environment.

DISPOSAL OF THE PRODUCT

SACKit Boom 150 is made from recyclable and high quality materials. Do not dispose of together with living garbage. Please understand the local classification about collecting electronical, electrical products that contains batteries. Correct disposal of the product will help to prevent negative impact to the environment.

TECHNICAL SPECIFICATIONS

• Product size: 268 x 190 x 370mm
• Bluetooth: 5.0
• Bluetooth working range : Over 10m
• Power input :DC 15V/2A
• Output – bass: 30W
• Output – treble: 2 x 10W
• Output – USB power bank: 5V/1.5A
• Frequency response: 18-20KHz
• Battery: Li-ion, 6600mAh, up to 6 hours streaming at 75-100% volume.
• Amplifier: Class D
• Product: 4.8 kg

Contact your SACKit dealer if you experience problems and the speaker does not work. Never attempt to repair the speaker yourself.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>