SACKit Active 200 True Wireless Earbuds User Manual

SACKit Active 200 True Wireless Earbuds

THANK YOU!
Thank you for purchasing the SACKit Active 200 True Wireless Earbuds from SACKit. Please read the entire instruction manual before using the product and save it for future reference. We reserve the right to change or update information and to correct errors, inaccuracies, or missions in text, images, and technical data. If you have any questions regarding technical problems please contact our customer services. We hope you will enjoy your new SACKit Active 200 earbuds.
Let SACKit rock your life!

BOX CONTENTS

• 1x SACKit Active 200 Earbuds
• 1x Charging case
• 1x USB charging cable
• 3x different sizes of silicone earbuds tips
• 2x different sizes of detachable ear hooks
• 1x Quick start guide

PRODUCT OVERVIEW

QUICK START GUIDE
Charging
When you receive your SACKit Active 200, they must be charged before they are ready for use. Your SACKit Active 200 must be placed in the corresponding charging box. This is how SACKit Active 200 charge.
The SACKit Active 200 can now be charged in one of the following ways:

1. Place your SACKit Active 200 charging case on a Qi wireless charger, for example like the SACKit CHARGEit.
2. Use the supplied USB-C cable and any 5V, 1A power adapter.

NOTE:
SACKit Active 200 must be charged for a minimum of 2 hours before use.
Earbuds are in the charging case.

1.  Charging on a Qi wireless charger.
2. Charging through the supplied USB-C cable.

NOTE:
SACKit Active 200 turns off automatically when placed in the charging case, provided that the case still has battery.
SACKIT ACTIVE 200 EARBUDS AND EAR HOOKS
For the best experience of the SACKit Active 200, first find the right ear-tip size. Then you will find the ear hook that fits your ear size best. These ear hooks are easily attached and removed (see the illustration below on the left). Place earbuds in the ear as shown on the illustration below on the right. Here, the inner ear support is placed downwards in the ear. You can rotate your earbuds until you find the right position.

USE SACKIT ACTIVE 200 EARBUDS

1. First use: Take the SACKit Active 200 earbuds out of the charging case. Both earbuds flash white LED.
2. After a few seconds, one earbud will flash red/white, indicating that the two earbuds are connected correctly in True Wireless Stereo.
3.  Turn on Bluetooth on the device you want to connect
4. Select “SACKit Active 200” in the Bluetooth settings of your device. Your earbuds are now paired with the device.
5. Start playing music on your device
6. SACKit Active 200 turns on/off automatically when removed/inserted in the charging case. Alternatively, hold the earbud buttons for more than 10 seconds, for manual on/off.
7.  SACKit Active 200 will automatically pair with the last connected device.
8.  To connect to a new device make sure that the previous connected device is disconnected otherwise connecting opportunity won’t appear on the new device.
   

BASIC FUNCTIONS

Left earbud

• Volume down – 1 tap
• Previous song – Hold for 2 sec
• Play/pause – 2 taps
• Bass mode on/off – Hold for 3 sec
• Answer/end call – 2 taps

Right earbud

• Volume up – 1 tap
• Next song – Hold for 2 sec
• Play/pause – 2 taps
• Bass mode on/off – Hold for 3 sec
• Answer/end call – 2 taps

LED FUNCTIONS FOR THE SACKIT ACTIVE 200 CASE
When earbuds charge in the case

1. blink – 0-25% power on the case
2. blink – 25-50% power on the case
3. blink – 50-75% power on the case
4. blink – 75-100% power on the case

LED off – fully charged earbuds
When the casse charges with plug / wireless

1.  blink – 0-25% power on the case
2.  blink – 25-50% power on the case
3. blink – 50-75% power on the case
4. blink – 75-100% power on the case

LED on – fully charged case
LED FUNKTIONER FOR SACKIT ACTIVE 200 EARBUDS
When earbuds are charging in case
Red blinks – earbuds are charging LED off – earbuds are fully charged
When earbuds are in use

• White blinks – earbuds paired with a device White/red blinks – pairing mode
• 4 red blinks each minute – earbuds needs charging

TROUBLESHOOTING

1. Reset SACKit Active 200 if the earbuds cannot connect to each other
2.  Reset by placing both earbuds in the charger box and holding down both earbuds buttons until the red LED goes out. Then hold down both earbuds buttons for 10 seconds until one earbud flashes red/white.
3. You can now reconnect SACKit Active 200 to your device
4. If you are experiencing issues with stability or connection try removing the pairing between your device and SACKit Active 200. Choose Bluetooth settings on your device and forget SACKit Active200. Pair again as described in ’Use SACKit Active 200 earbuds’

CLEANING OF THE PRODUCT

1. Kindly switch off SACKit Active 200 before you clean it and remove the earbuds from the charging case. The earbuds can manually be turned off by pressing the touch button on the earbuds for 10 seconds.
2.  Do not use any water, cleaner or chemicals to clean the earbuds
3.  To clean the earbuds, remove the small silicone tip and expose the black speaker fabric
4. Use a dry cotton swab to gently clean the speaker fabric.
5. Use a soft, dry, and lint-free cloth to wipe the entire earbud and charging case
6.  After cleaning please place the earbuds back into the charging

NOTE:
Avoid using sharp objects to clean SACKit Active 200 earbuds and charging case
DISPOSAL OF THE PRODUCT
SACKit Active 200 is made from recyclable and high quality materials. Do not dispose of together with living garbage. Please understand the local classification about collecting electronical, electrical products that contains batteries. Correct disposal of the product will help to prevent negative impact to the environment.

TECHNICAL SPECIFICATIONS

• Product size: 8,7 x 5,8 x 3,5 cm
• Weight: 85 g
•  Bluetooth 5.0
•   Bluetooth range : 10m
•   Battery life: up to 27 hours
• Earbuds: 6 hours
•   Case: 21 hours
• Battery in case: 740 mAh
• Battery in earbuds: 2 x 60 mAh
• IPX 7 water- and sweatproof
•  Bass mode
•  Wireless charging

Contact your SACKit dealer if you experience problems and the earbuds does not work. Never attempt to repair the earbuds yourself.
IMPORTANT SAFETY INFORMATION
Please read the following information and operate the product and accessories accordingly to ensure correct and safe use of the product. We are not responsible for damage caused by failure to comply with the instructions or irresponsible use of the product.
Warning:
To prevent any fires or electrical hazards please act according to the following guidelines:

• Do not disassemble or replace any parts of this device. Please contact professional maintenance or qualified service center if there is any damage to the device.
• Do not place the product in any kind of liquid for a long time.
•  Do not place this device in or close to sources of excessive heat or fire. (Such as: candles, fireplaces or direct sunlight)
•  Please shut down in lightning weather
•  Keep this device away from any dust and vibration.
• Do not use excessive force when using any of the control buttons.
•  If the product is below 5°C when you receive it, please open the product packaging and wait for it to reach room temperature.
•  To prevent overheating of the product is it necessary to keep a cleared area of 10 cm around the product while charging
•  Be sure to place this device on stable, flat and level surfaces while charging.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>