SACKit Lamp Intelligent User Manual
- October 30, 2023
- SACKit
Table of Contents
Lamp
Intelligent
USER MANUAL
Lamp Intelligent
THANK YOU!
Thank you for purchasing this SACKit Lamp intelligent battery-powered lamp.
Please read this manual carefully before using your new lamp. We do not take
responsibility for personal injury or product damage caused by incorrect or
irresponsible use of the product. If you experience technical problems, you
can contact our customer service at info@sackit.dk.
We hope you will enjoy your new SACKit Lamp intelligent.
Enlight the best moments!
BOX CONTENTS
1 x SACKit Lamp Intelligent
1 x USB-C charging cable (adapter not included)
1 x Quick start guide
QUICK START GUIDE
- Charge the lamp for a minimum of 3 hours .
- Turn on the light by pressing the top and hold for 1 sec.
- Toggle through three levels of brightness.
- Download ”SACKit light” application for more functions.
- Now enjoy the moment with the pleasant light.
*5 clicks in total from the time you turn on the light until you turn it off again.
NOTE: Turn off the lamp after use to extend battery life.
PRODUCT OVERVIEW
SACKit Light
App
The SACKit Light app lets you adjust, group and operate up to 99 SACKit lamps
.
The app lets you adjust light temperature and brightness on each individual
lamp or group.
The app can be downloaded on Apple App Store or Google Play.
NOTE:
To operate the lamps, at least one of them needs to be 10 – 25 meters from
your phone (depending on the opstacles between them). The same goes for the
rest of the lamps, that needs to be 10 – 25 meters from another lamp to stay
connected.
HOW TO USE SACKIT LAMP INTELLIGENT
SACKit Lamp Intelligent is switched on and operated by pressing the top of the
lamp (A). Reset Mode:
If you experience trouble with a lamp you can reset it by putting it into
Reset Mode.
This is done by first turning off the lamp. Then press and hold down the
button for 10 seconds until the light starts flashing.
Release the button and the lamp is now reset.
Deep Sleep Mode:
When the lamp is turned off, it still uses a little power to search for your
app.
If you want to turn off the lamp completely to avoid using any power, it must
be put into Deep Sleep Mode.
This is done by first turning on the lamp. Then press and hold down the button
for 15 seconds until the light starts flashing.
Release the button and the lamp is now in Deep Sleep Mode.
NOTE:
You cannot use the app to turn on a lamp that is put into Deep Sleep Mode.
*Saved Brightness:
When the lamp is on, you can set your own brightness at any time by pressing
and holding the ‘Power button’. When you hold down the button, the brightness
will change and either go towards a brighter or dimmer light. When you release
the button, this brightness will be saved as; ’Saved brightness’.
This setting will always be the first brightness at which the lamp is turned
on.
NOTE:
You can only save one brightness at a time.
HOW TO CHARGE SACKIT LAMP INTELLIGENT
You charge the lamp by placing the magnetic end of the included USB cable on
the charging area (B).
NOTE:
– As a minimum you need to use an USB adapter with the following output:
5V/2A.
– The lamp is fully charge in 6 hours. CHARGING SACKIT LAMP
The lamp is charged through the area (B).
The LED (C) on the lamp will light red when charging and green when fully
charged.
TROUBLESHOOTING
If you have trouble operating your SACKit Lamp Intelligent, please try the
following solutions. If the following solutions do not solve your problem,
please contact our customer service at info@sackit.dk for further support .
There is no light when I turn on my SACKit Lamp Intelligent
- Please check if the lamp has run out of power. If the lamp has run out, charge the battery pack for about 6 hours for a full charge .
I cannot charge/turn on my SACKit Lamp Intelligent
- Please make sure that the adapter and the charging cable is connected correctly.
Please check the power adapter voltage and current demand.
IMPORTANT SAFETY INFORMATION
Please read and follow the following instructions to ensure that you use the
SACKit Lamp Intelligent safely and correctly. Product damage caused by use
contrary to the following information is not covered by the warranty.
Warning
To prevent any fires or electrical hazards please act according to the
following guidelines:
- Do not disassemble or replace any parts of this device. Please contact professional maintenance or a qualified service center if there is any damage to the device.
- Before the product is connected to a power supply socket, please ensure that the voltage of the power supply and the lamp matches. If the voltage does not match, do not connect the battery pack to the power socket.
- Never charge the battery pack in or near water!
- Do not place the lamp too close to excessive heat or fire (such as a fireplace). However, the lamp can withstand up to 60 ° C and can withstand direct sunlight.
- The operating temperature of the lamp is between -20°C to 60°C.
- The charging temperature of the lamp should be between 10 °C to 45 °C.
- This lamp is IP67 tight. This means it is dustproof and that it can be placed fully under water for a short period of time.
Disposal of the product
SACKit Lamp Intelligent is made from recyclable and high-quality materials. Do
not dispose of the lamp together with other living garbage. Please understand
the local guidelines for the disposal of electronics containing batteries.
Correct disposal of the lamp will help to prevent negative consequences for
the environment and health.
TECHNICAL SPECIFICATIONS
- Model: SACKit Lamp Intelligent
- Bluetooth version: 5.0
- Max brightness: 120 lumens
- Light adjustment: 5 modes
- Battery: 2.600 mAh
- Battery time: 14 hours at 80% lumen
- Dimensions: 11,6 x 9 cm
- Waterproof level: IP67
- Operating temperature: -20oC to 60oC
- Charging temperature: 10oC to 45oC
Contact your SACKit dealer if you experience problems and the lamp does not work. Never attempt to repair the lamp yourself .
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>