CANDY CCBF5172WHK Fridge and Freezer Instruction Manual
- June 6, 2024
- Candy
Table of Contents
PRODUCT DESCRIPTION
- Control panel and light
- Movable Shelves
- Crisper
- Freezer drawers
- Balconies
- Leveling feet
- The most energy-saving configuration requires drawers, food boxes, es, and shelves to be positioned in the product, please refer to the above pictures.
** The pictures above are only for reference. The actual configuration will depend on the physical product or statement by the distributor.
Space requirements
The unit’s door must be able to fully open as shown. Spare enough space for
the convenient opening of the doors and drawers.
Width: min. 995 mm
Depth: min. 1093 mm
➀ ON/OFF key used to switch on/off the appliance.
➁ Mode key used to select the fridge temperature or the special functions
like.
➂ WiFi Icon shows if the appliance is connected to the app.
➃ Super Cool Icon shows if the function is activated.
➄ Temperature levels, show which is the selected temperature.
Use
- Plug on the appliance. The appliance will turn on automatically.
- The temperature will automatically be set at 4 °C in the fridge and -18 °C in the freezer.
- To change the temperature, with the fridge door open, press the mode key. When the setting increases, the corresponding LED light will turn on. An acoustic signal is made every time the mode key is pressed and the temperature is changed.
- In case of power loss, the last cooling level set will be restored.
- To restore the default setting, at the screen lit, keep pressing the TEMP button, and then press the ON/OFF button 5 times in 5 seconds.
- Under the normal operating condition (in spring and autumn), it is recommended to set the temperature at 4 °C. In summer when the ambient temperature is high, it is recommended to set the temperature at 6~8 °C, so as to guarantee the fridge and freezer temperatures and reduce the refrigerator continuous running time; and in winter when the ambient temperature is low, it is recommended to set the temperature at 2~4 °C to avoid frequent start/stop of the refrigerator.
Customized temperature
From the app, it is possible to customize the temperature of the fridge compartment. The temperature can be set with 1 °C sensitivity and it is possible to select a temperature from 2 °C to 8 °C in the fridge. An acoustic signal is made every time the temperature is changed. When the temperature is selected by the app, there is no indication on the control panel, all the temperature LED lights are turned off, while only the WiFi icon is turned on.
Fine Tuning
The fine-tuning selection mode gives the possibility to set the temperatures
by sublevels; each temperature level has three sub levels.
How to use the fine-tuning function:
- Press the mode key for 8 seconds to enter fine-tuning selection mode. When the appliance enters the mode, an acoustic signal is made and the LED of the currently selected cooling level blinks.
- By short pressing the mode key within 5 seconds, the fine-tuning setting increases, and, at each pressing, an acoustic signal is made.
- During fine-tuning, the LED of the selected cooling level is fixed, while the LED of the selected sublevel blinks.
- If no key is pressed for 5 seconds, the system automatically exits from fine-tuning selection mode. The fine-tuning setting is saved and the LED of the selected fridge temperature is fixed.
- If the fine-tuning is activated again, the setting will start from the previously-stored level.
Super Cool function
It is suggested to switch on the SuperCool function if a large quantity of
food should be stored (for example after the purchase). The Super-Cool
function accelerates the cooling of fresh food and protects the goods already
stored from undesirable warming. When the function is activated, the
temperature of the fridge is automatically set at 2 °C.
How to use the SuperCool function:
-
The function can be activated by pressing many times the mode key until the Super Cool LED is turned ON or by selecting it from the app. If the function is activated, the
corresponding icon on the control panel will be turned on. -
To exit the SuperCool function, press the mode key again.
-
The Super Cool function automatically ends after 30 hours of running.
-
When the Super Cool ends, the corresponding icon of the control panel turns off and the previously set cooling level is restored.
Super Freeze function
The super freezing function accelerates the freezing of fresh food and
protects the goods already stored from undesirable warming. If a large amount
of food has to be freeze, it is recommended to set the Super Freeze function
on 24h before the usage. When the function is activated, the temperature is
automatically set at -25 °C.
How to use the Super Freeze function:
- The function can be launched only by selecting it from the app. If the function is activated, it will be shown by the app; there is no indication on the control panel.
- To exit the Super Freeze function, turn it off from the app.
- The Super Freeze function automatically ends when the function has lasted for more than 50 hours.
Eco-mode
The Eco mode can be activated to optimize the performance of the appliance,
whereas obtaining the best food storage. When the function is activated, the
temperature is automatically set at 5 °C in the fridge, and at -18 °C in the
freezer.
How to use the Eco mode:
- The function can be activated only by selecting it from the app. If the function is activated, it will be shown by the app; there is no indication on the control panel.
- To exit the Eco mode, turn it off from the app; the previously selected temperature will be restored.
- The Eco mode automatically ends when another function is chosen from the control panel.
Holiday function
The Holiday function can be used to reduce the energy consumption of the
appliance when it is not used regularly. The function will turn off the LED
lights (even if the door is open) and the fridge will work on low power
consumption mode), whereas the freezer will keep working normally.
How to use the Holiday function:
- The function can be activated only by selecting it from the app. If the function is activated, it will be shown by the app; there is no indication on the control panel.
- To exit the Holiday function, turn it off from the app; the previously selected temperature will be restored.
- The Holiday function automatically ends when another function is chosen from the control panel.
Defrosting
The defrosting of the refrigerator and freezer compartment is done
automatically: no manual operation is needed.
Slider
Near the vegetable basket, there is a slider that allows you to adjust the
humidity inside it: moving it to the right decreases the humidity, moving it
to the left increases the humidity.
Demo mode
Keep the refrigerated door open, press and hold the on/off key, and click the
set key five times. The refrigerator will enter the Demo mode. To exit the
mode, keep pressing the door switch and press again the SET key for 5s.
Error codes
If – 6 °C LED light is flashing, it means there has been a fan error. Please,
contact the technical assistance to help solve the problem
APP CONNECTION (Content only) IN APP PAIRING PROCEDURE
Step 1
- Download the hOn app on the stores
|
---|---
http://go.haier-europe.com/download-app/
Step 2
- Create your account on the hOn App or log in if you already have an account
Step 3
- Follow pairing instructions in the hOn App
WiFi Use
To activate the Wi-Fi, long-press the mode key for 2 seconds, the Wi-Fi icon
will turn on, and an acoustic signal is made. If the Wi-Fi has not been
configured yet, when the refrigerator turns on, it will automatically enter
the configuration mode and keep this status for 30 minutes. To use the
configuration mode:
- Press the mode key for 2s but less than 8s, the refrigerator enters the Wi-Fi configuration mode and an acoustic signal is made. The Wi-Fi icon starts blinking.
- Follow in-app instructions to configure the Wi-Fi (see above).
- Once the Wi-Fi is configured and the connection established, the Wi-Fi icon is on and fixed.
- After 30 minutes without performing any operation, the Wi-Fi will automatically exit the configuration mode.
- If the Wi-Fi has already been configured, it will automatically reconnect according to the configuration information.
DOOR REVERSIBILITY
Tools needed: screwdriver
1. Remove the top hinge cover|
---|---
2. Unscrew the top hinge|
3. Remove the top hinge cover (left)|
4. Remove the middle hinge|
5. Remove the lower hinge|
6. Mount hinge foot|
7. Mount middle hinge|
8. Mount the upper hinge plate|
9. Mount the upper hinge cover|
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>