PHILIPS 19S4 LED LCD Monitor User Manual

19S4
www.philips.com/welcome

Important

This electronic user’s guide is intended for anyone who uses the Philips monitor. Take time to read this user manual before you use your monitor. It contains important information and notes regarding operating your monitor.
The Philips guarantee applies provided the product is handled properly for its intended use, in accordance with its operating instructions and upon presentation of the original invoice or cash receipt, indicating the date of purchase, dealer’s name and model and production number of the product.

Safety precautions and maintenance

Warnings
Use of controls, adjustments or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards and/or mechanical hazards.
Read and follow these instructions when connecting and using your computer monitor.

Operation

• Please Keep the monitor out of direct sunlight, very strong bright lights and away from any other heat source. Lengthy exposure to this type of environment may result in discoloration and damage to the monitor.
• Keep the display away from oil. Oil may damage the plastic cover of the display and void the warranty.
• Remove any object that could fall into ventilation holes or prevent proper cooling of the monitor’s electronics.
• Do not block the ventilation holes on the cabinet.
• When positioning the monitor, make sure the power plug and outlet are easily accessible.
• If turning off the monitor by detaching the power cable or DC power cord, wait for 6 seconds before attaching the power cable or DC power cord for normal operation.
• Please use approved power cord provided by Philips all the time. If your power cord is missing, please contact with your local service center. (Please refer to Service contact information listed in Regulation & Service Information Manual.)
• Operate under the specified power supply. Be sure to operate the monitor only with the specified power supply. Use of an incorrect voltage will cause malfunction and may cause fire or electric shock.
• Protect the cable. Do not pull or bend the power cable and signal cable. Do not place the monitor or any other heavy objects on the cables, if damaged, the cables may cause fire or electric shock.
• Do not subject the monitor to severe vibration or high impact conditions during operation.
• To avoid potential damage, for example the panel peeling from the bezel, ensure that the monitor does not tilt downward by more than -5 degrees. If the -5 degree downward tilt angle maximum is exceeded, the monitor damage will not be covered under warranty.
• Do not knock or drop the monitor during operation or transportation.
• Excessive usage of monitor can cause eye discomfort, it’s better to take shorter breaks more often at your workstation than longer breaks and less often; for example a 5-10 minute break after 50-60-minute continuous screen use is likely to be better than a 15-minute break every two hours. Try to keep your eyes from eye strain while using the screen for a constant period of time by :
• Looking at something varying distances after a long period focusing on the screen.
• Conscious Blinking often while you work.
• Gently closing and rolling your eyes to relax.
• Reposition your screen to appropriate height and angle according to your height.
• Adjusting the brightness and contrast to appropriate level.
• Adjusting the environment lighting similar to that of your screen brightness, avoid the fluorescent lighting, and surfaces that don’t reflect too much light.
• Seeing a doctor if your symp-toms.

Maintenance

• To protect your monitor from possible damage, do not put excessive pressure on the LCD panel. When moving your monitor, grasp the frame to lift; do not lift the monitor by placing your hand or fingers on the LCD panel.
• Oil-based cleaning solutions may damage the plastic parts and void the warranty.
• Unplug the monitor if you are not going to use it for an extensive period of time.
• Unplug the monitor if you need to clean it with a slightly damp cloth. The screen may be wiped with a dry cloth when the power is off. However, never use organic solvent, such as, alcohol, or ammonia-based liquids to clean your monitor.
• To avoid the risk of shock or permanent damage to the set, do not expose the monitor to dust, rain, water, or excessive moisture environment.
• If your monitor gets wet, wipe it with dry cloth as soon as possible.
• If foreign substance or water gets in your monitor, please turn the power off immediately and disconnect the power cord. Then, remove the foreign substance or water, and send it to the maintenance center.
• Do not store or use the monitor in locations exposed to heat, direct sunlight or extreme cold.
• In order to maintain the best performance of your monitor and use it for a longer lifetime, please use the monitor in a location that falls within the following temperature and humidity ranges.
  • Temperature: 0-40°C 32-104°F
  • Humidity: 20-80% RH

Important information for Burn-in/Ghost image

• Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your monitor will display unchanging static content. Uninterrupted display of still or static images over an extended period may cause “burn in”, also known as “after-imaging” or “ghost imaging”, on your screen.
• “Burn-in”, “after-imaging”, or “ghost imaging” is a well-known phenomenon in LCD panel technology. In most cases, the “burned in” or “after-imaging” or “ghost imaging” will disappear gradually over a period of time after the power has been switched off.

Warning
Failure to activate a screen saver, or a periodic screen refresh application may result in severe “burn-in” or “after-image” or “ghost image” symptoms that will not disappear and cannot be repaired. The damage mentioned above is not covered under your warranty.

Service

• The casing cover should be opened only by qualified service personnel.
• If there is any need for any document for repair or integration, please contact with your local service center. (Please refer to Service contact information listed in Regulation & Service Information Manual.)
• For transportation information, please refer to “Technical Specifications”.
• Do not leave your monitor in a car/trunk under direct sun light.

Note
Consult a service technician if the monitor does not operate normally, or you are not sure what procedure to take when the operating instructions given in this manual have been followed.

Notational Descriptions

The following subsections describe notational conventions used in this document.
Notes, Cautions and Warnings
Throughout this guide, blocks of text may be accompanied by an icon and printed in bold or italic type. These blocks contain notes, cautions or warnings. They are used as follows:

Note
This icon indicates important information and tips that help you make better use of your computer system.
Caution
This icon indicates information that tells you how to avoid either potential damage to hardware or loss of data.
Warning
This icon indicates the potential for bodily harm and tells you how to avoid the problem.
Some warnings may appear in alternate formats and may not be accompanied by an icon. In such cases, the specific presentation of the warning is mandated by the relevant regulatory authority.

Disposal of product and packing material

Waste Electrical and Electronic Equipment- WEEE

 This marking on the product or on its packaging illustrates that, under European Directive 2012/19/EU governing used electrical and electronic appliances, this product may not be disposed of with normal household waste. You are responsible for disposal of this equipment through a designated waste electrical and electronic equipment collection. To determine the locations for dropping off such waste electrical and electronic, contact your local government office, the waste disposal organization that serves your household or the store at which you purchased the product.
Your new monitor contains materials that can be recycled and reused. Specialized companies can recycle your product to increase the amount of reusable materials and to minimize the amount to be disposed of.
All redundant packing material has been omitted. We have done our utmost to make the packaging easily separable into mono materials.
Please find out about the local regulations on how to dispose of your old monitor and packing from your sales representative.

Taking back/Recycling Information for Customers
Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization’s product, service and activities.
From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end-of- life management primarily entails participation in national take-back initiatives and recycling programs whenever possible, preferably in cooperation with competitors, which recycle all materials (products and related packaging material) in accordance with all Environmental Laws and taking back program with the contractor company.
Your display is manufactured with high quality materials and components which can be recycled and reused.
To learn more about our recycling program please visit http://www.philips.com/a-w/about/sustainability. html

Setting up the monitor

Installation

1. Package contents
   

• Depends on the country 2. Install the base
  1. Place the monitor face down on a smooth surface. Pay attention not to scratch or damage the screen.
  2. Hold the base with both hands.
  

  3. Connecting to your PC

1. Kensington anti-theft lock
2. VGA input
3. DVI input
4. Audio input
5. AC power input
6. Earphone jack

Connect to PC

1. Connect the power cord to the back of the monitor firmly.
2. Turn off your computer and unplug its power cable.
3. Connect the monitor signal cable to the video connector on the back of your computer.
4. Plug the power cord of your computer and your monitor into a nearby outlet.
5. Turn on your computer and monitor. If the monitor displays an image, installation is complete.

Operating the monitor

1. Description of the control buttons
   

Confirm the OSD adjustment.
3| | Adjust the OSD menu.
4| | Select the SmartPower control level.
5| | Adjust the speaker volume.
6| | Return to previous OSD level.
7| | SmartImage hot key. There are 6 modes to select: Office, Photo, Movie, Game, Economy, Off.

2. Description of the On Screen Display What is On-Screen Display (OSD)?

On-Screen Display (OSD) is a feature in all Philips LCD monitors. It allows an end user to adjust screen performance or select functions of the monitors directly through an on-screen instruction window. A user friendly on screen display interface is shown as below:

Basic and simple instruction on the control keys
In the OSD shown above, you can press buttons at the front bezel of the monitor to move the cursor, and press OK button to confirm the choice or change.

The OSD Menu
Below is an overall view of the structure of the On-Screen Display. You can use this as a reference when you want to work your way around the different adjustments later on.

3. Resolution notification

This monitor is designed for optimal performance at its native resolution, 1280 × 1024 @ 60 Hz. When the monitor is powered on at a different resolution, an alert is displayed on screen: Use 1280 × 1024 @ 60 Hz for best results.
Display of the native resolution alert can be switched off from Setup in the OSD (On Screen Display) menu.

4. Physical Function
Tilt

Warning

• To avoid potential screen damage, such as panel peeling, ensure that the monitor does not tilt downward by more than -5 degrees.
• Do not press the screen while adjusting the angle of the monitor. Grasp only the bezel.

Remove the Base Assembly for VESA Mounting

Before you start disassembling the monitor base, please follow the instructions below to avoid any possible damage or injury.

1. Place the monitor face down on a smooth surface. Pay attention not to scratch or damage the screen.
   

2. Use a flathead screwdriver to remove four mylars from the hinge cover.

3. Remove the screws from hinge cover.
   

4. Remove the base assembly.
   

Note
This monitor accepts a 100mm x 100mm VESA-compliant mounting interface.

• Display design may differ from those illustrated.
  Warning

  • To avoid potential screen damage, such as panel peeling, ensure that the monitor does not tilt downward by more than -5 degrees.
  • Do not press the screen while adjusting the angle of the monitor. Grasp only the bezel.

Image Optimization

SmartImage

1. What is it?
   SmartImage provides presets that optimize display for different types of content, dynamically adjusting brightness, contrast, color and sharpness in real time. Whether you’re working with text applications, displaying images or watching a video, Philips SmartImage delivers great optimized monitor performance.

2. Why do I need it?
   You want a monitor that delivers optimized display all your favorite types of content, SmartImage software dynamically adjust brightness, contrast, color and sharpness in real time to enhance your monitor viewing experience.

3. How does it work?
   SmartImage is an exclusive, leading edge Philips technology that analyzes the content displayed on your screen. Based on a scenario you select, SmartImage dynamically enhances the contrast, color saturation and sharpness of images to enhance the contents being displayed – all in real time with the press of a single button.

4. How to enable SmartImage?

1. Press to launch the SmartImage on screen display.
2. Keep pressing to toggle among Office, Photo, Movie, Game, Economy and Off.
3. The SmartImage on screen display will remain on screen for 5 seconds, or you can also press “OK” to make confirmation.
4. When SmartImage is enabled, the sRGB scheme is disabled automatically. To use sRGB, you need to disable SmartImage with the button at the front bezel of your monitor.

There are six modes to select: Office, Photo, Movie, Game, Economy and Off.

• Office: Enhances text and dampens brightness to increase readability and reduce eye strain. This mode significantly enhances readability and productivity when you’re working with spreadsheets, PDF files, scanned articles or other general office applications.
• Photo: This profile combines color saturation, dynamic contrast and sharpness enhancement to display photos and other images with outstanding clarity in vibrant colors – all without artifacts and faded colors.
• Movie: Ramped up luminance, deepened color saturation, dynamic contrast and razor sharpness displays every details in darker areas of your videos without color washout in brighter areas maintaining a dynamic natural values for the ultimate video display.
• Game: Turn on over drive circuit for best response time, reduce jaggy edges for fast moving objects on screen, enhance contrast ratio for bright and dark scheme, this profile delivers the best gaming experience for gamers.
• Economy: Under this profile, brightness, contrast are adjusted and backlighting finetuned for just right display of everyday office applications and lower power consumption.
• Off: No optimization by SmartImage.

SmartContrast

1. What is it?
   Unique technology that dynamically analyzes displayed content and automatically optimizes a Monitor’s contrast ratio for maximum visual clarity and viewing enjoyment, stepping up backlighting for clearer, crisper and brighter images or dimming backlighting for clear display of images on dark backgrounds.

2. Why do I need it?
   You want the very best visual clarity and viewing comfort for every type of content. SmartContrast dynamically controls contrast and adjusts backlighting for clear, crisp, bright gaming and video images or displays clear, readable text for office work. By reducing your monitor’s power consumption, you save on energy costs and extend the lifetime of your monitor.

3. How does it work?
   When you activate SmartContrast, it will analyse the content you are displaying in real time to adjust colors and control backlight intensity. This function will dynamically enhance contrast for a great entertainment experience when viewing videos or playing games.

Technical Specifications

Picture/Display

Monitor Panel Type| IPS-ADS
Backlight| LED
Panel Size| 19″ (48.3 cm)
Aspect Ratio| 5:04
Pixel Pitch| 0.293 x 0.293 mm
SmartContrast| 20,000,000:1
Response time| 14ms
SmartResponse time (typ.)| 5ms(GtG)
Optimum Resolution| 1280 x 1024 @ 60Hz
Viewing Angle| 178° (H) / 178° (V) @ C/R > 10
Picture Enhancement| SmartImage
Display Colors| 16.7M
Vertical Refresh Rate| 56 Hz – 75 Hz
Horizontal Frequency| 30 kHz – 83 kHz
sRGB| YES
Connectivity
Signal Input| DVI(Digital)
VGA( Analog)
Input Signal| Separate Sync, Sync on Green
Audio In/Out| PC audio-in headphone out
Convenience
Built-in speakers| 1.5W x 2
User Convenience|
OSD Languages| English
Other Convenience| Kensington Lock
Plug & Play Compatibility| DDC/CI, sRGB, Window7/8/8.1/10, Mac OSX
Stand
Tilt| -0.25
Power

On Mode| 20W (typ.), 25W (max.)
Sleep (Standby mode)| <0.3W
Off mode| <0.3W
On Mode(ECO mode)| 8W (typ.)
Power(EnergyStar test method)

Energy Consumption| AC Input Voltage
at 100VAC, 50Hz| AC Input Voltage
at 115VAC,  60Hz| AC Input Voltage
at 230VAC,  50Hz
Normal Operation (typ.)| 11.98W| 11.93W| 11.93W
Sleep (Standby mode)| <0.3W (typ.)| <0.3W (typ.)| <0.3W (typ.)
---|---|---|---
Off mode| <0.3W (typ.)| <0.3W (typ.)| <0.3W (typ.)
Heat Dissipation*| AC Input Voltage
at 100VAC , 50Hz| AC Input Voltage
at 115VAC , 60Hz| AC Input Voltage
at 230VAC , 50Hz
Normal Operation| 40.85 BTU/hr| 40.68 BTU/hr| 40.68 BTU/hr
Sleep (Standby mode)| <1.02 BTU/hr| <1.02 BTU/hr| <1.02 BTU/hr
Off mode| <1.02 BTU/hr| <1.02 BTU/hr| <1.02 BTU/hr
Power LED indicator| On mode: White, Standby/Sleep mode: White (blinking)
Power Supply| Built-in, 100-240VAC, 50-60Hz
Dimension|
---|---
Product with stand
(WxHxD)| 404 x 418 x 194 mm
Product without stand
(WxHxD)| 404 x 346 x 61 mm
Product with packaging
(WxHxD)| 465 x 457 x 139 mm
465 x 480 x 159 mm (19S4QAB3/19S4QAW3 FOR JP)
Weight|
Product with stand| 3.20 kg
Product without stand| 2.80 kg
Product with packaging| 4.82 kg
5.80 kg (19S4QAB3/19S4QAW3 FOR JP)
Operating Condition|
Temperature range (operation)| 0°C to 40 °C
Temperature range
(Non-operation)| -20°C to 60°C
Relative humidity| 20% to 80%
Environmental|
ROHS| YES
Packaging| 100% recyclable
Specific Substances| 100% PVC BFR free housing
Cabinet|
Color| Black / White
Finish| Texture

Note
This data is subject to change without notice. Go to www.philips.com/support to download the latest
version of leaflet.

Resolution & Preset Modes

Maximum Resolution
1280 x 1024 @ 60 Hz (analog input)
1280 x 1024 @ 60 Hz (digital input)
Recommended Resolution
1280 x 1024 @ 60 Hz (digital input)

Note
Please notice that your display works best at native resolution of 1280 x 1024 @ 60Hz. For best display quality,please follow this resolution recommendation.

Power Management

If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will ‘wake up’ automatically. The following table shows the power consumption and signaling of this automatic power saving feature:

Power Management Definition

VESA Mode| Video| H-sync| V-sync| Power Used| LED Color
Active| ON| Ye s| Ye s| 20W (typ.), 25W(Max.),| White
Sleep (Standby mode)| OFF| No| No| 0.3W (typ.)| White (blink)
Off mode| OFF| –| –| 0.3 W (typ.)| OFF

The following setup is used to measure power consumption on this monitor.

• Native resolution: 1280 x 1024
• Contrast: 50%
• Brightness: 100%
• Color temperature: 6500k with full white pattern
  Note
  This data is subject to change without notice.

Customer care and warranty

Philips’ Flat Panel Monitors Pixel Defect Policy

Philips strives to deliver the highest quality products. We use some of the industry’s most advanced manufacturing processes and practice stringent quality control. However, pixel or sub pixel defects on the TFT Monitor panels used in flat panel monitors are sometimes unavoidable. No manufacturer can guarantee that all panels will be free from pixel defects, but Philips guarantees that any monitor with an unacceptable number of defects will be repaired or replaced under warranty. This notice explains the different types of pixel defects and defines acceptable defect levels for each type. In order to qualify for repair or replacement under warranty, the number of pixel defects on a TFT Monitor panel must exceed these acceptable levels. For example, no more than 0.0004% of the sub pixels on a monitor may be defective. Furthermore, Philips sets even higher quality standards for certain types or combinations of pixel defects that are more noticeable than others. This policy is valid worldwide.

Pixels and Sub pixels
A pixel, or picture element, is composed of three sub pixels in the primary colors of red, green and blue. Many pixels together form an image. When all sub pixels of a pixel are lit, the three colored sub pixels together appear as a single white pixel. When all are dark, the three colored sub pixels together appear as a single black pixel. Other combinations of lit and dark sub pixels appear as single pixels of other colors.
Types of Pixel Defects
Pixel and sub pixel defects appear on the screen in different ways. There are two categories of pixel defects and several types of sub pixel defects within each category.
Bright Dot Defects
Bright dot defects appear as pixels or sub pixels that are always lit or ‘on’. That is, a bright dot is a sub-pixel that stands out on the screen when the monitor displays a dark pattern. There are the types of bright dot defects.

One lit red, green or blue sub pixel.

Two adjacent lit sub pixels:
– Red + Blue = Purple
– Red + Green = Yellow
– Green + Blue = Cyan (Light Blue)

Three adjacent lit sub pixels (one white pixel).

Note
A red or blue bright dot must be more than 50 percent brighter than neighboring dots while a green bright dot is 30 percent brighter than neighboring dots.

Black Dot Defects
Black dot defects appear as pixels or sub pixels that are always dark or ‘off’. That is, a dark dot is a sub-pixel that stands out on the screen when the monitor displays a light pattern. These are the types of black dot defects.

Proximity of Pixel Defects
Because pixel and sub pixels defects of the same type that are near to one another may be more noticeable, Philips also specifies tolerances for the proximity of pixel defects.

Pixel Defect Tolerances
In order to qualify for repair or replacement due to pixel defects during the warranty period, a TFT Monitor panel in a Philips flat panel monitor must have pixel or sub pixel defects exceeding the tolerances listed in the following tables.

Note
1. 1 or 2 adjacent sub pixel defects = 1 dot defect

Customer Care & Warranty

For warranty coverage information and additional support requirements valid for your region, please visit www.philips.com/support website for details or contact your local Philips Customer Care Center.
For Warranty Period please refer to Warranty Statement in Regulation & Service Information Manual.
For extended warranty, if you would like to extend your general warranty period, an Out of Warranty service package is offered via our Certified Service Center.
If you wish to make use of this service, please be sure to purchase the service within 30 calendar days of your original purchase date. During the extended warranty period, the service includes pickup, repair and return service, however the user will be responsible for all costs accrued.
If the Certified Service Partner cannot perform the required repairs under the offered extended warranty package, we will find alternative solutions for you, if possible, up to the extended warranty period you have purchased.
Please contact our Philips Customer Service Representative or local contact center (by Consumer care number) for more details.
Philips Customer Care Center number listed below.

• Local Standard Warranty Period| • Extended Warranty Period| • Total Warranty Period
---|---|---
• Depend on different Regions| • + 1 Year| • Local Standard warranty period +1
| • + 2 Years| • Local Standard warranty period +2
| • + 3 Years| • Local Standard warranty period +3

**Proof of original purchase and extended warranty purchase required.

Note
Please refer to Regulation & Service Information Manual for regional service hotline, which is available on the Philips website support page.

Troubleshooting & FAQs

Troubleshooting

This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative.

1. Common Problems

No Picture (Power LED not lit)

• Make sure the power cord is plugged into the power outlet and into the back of the monitor.

• First, ensure that the power button on the front of the monitor is in the OFF position, then press it to the ON position.
  No Picture (Power LED is White)

• Make sure the computer is turned on.

• Make sure the signal cable is properly connected to your computer.

• Make sure the monitor cable has no bent pins on the connect side. If yes, repair or replace the cable.

• The Energy Saving feature may be activated

Screen says

• Make sure the monitor cable is properly connected to your computer. (Also refer to the Quick Start Guide).
• Check to see if the monitor cable has bent pins.
• Make sure the computer is turned on.

AUTO button doesn’t function

• The auto function is applicable only in VGA-Analog mode. If the result is not satisfactory, you can do manual adjustments via the OSD menu.

Note
The Auto Function is not applicable in DVI- Digital mode as it is not necessary.

Visible signs of smoke or sparks

• Do not perform any troubleshooting steps
• Disconnect the monitor from mains power source immediately for safety
• Contact with Philips customer service representative immediately.

2. Imaging Problems
Image is not centered

• Adjust the image position using the “Auto” function in OSD Main Controls.
• Adjust the image position using the Phase/ Clock of Setup in OSD Main Controls. It is valid only in VGA mode.

Image vibrates on the screen

• Check that the signal cable is properly securely connected to the graphics board or PC.

Vertical flicker appears

• Adjust the image using the “Auto” function in OSD Main Controls.
• Eliminate the vertical bars using the Phase/ Clock of Setup in OSD Main Controls. It is valid only in VGA mode.

Horizontal flicker appears

• Adjust the image using the “Auto” function in OSD Main Controls.

• Eliminate the vertical bars using the Phase/ Clock of Setup in OSD Main Controls. It is valid only in VGA mode.
  Image appears blurred, indistinct or too dar k

• Adjust the contrast and brightness on On-Screen Display.

An “after-image”, “burn-in” or “ghost image” remains after the power has been turned off.

• Uninterrupted display of still or static images over an extended period may cause “burn in”, also known as “after-imaging ” or “ghost imaging”, on your screen. “Burnin”, “after-imaging”, or “ghost imaging” is a well-known phenomenon in LCD panel technology. In most cases, the “burned in” or “after-imaging” or “ghost imaging” will disappear gradually over a period of time after the power has been switched off.
• Always activate a moving screen saver program when you leave your monitor unattended.
• Always activate a periodic screen refresh application if your LCD monitor will display unchanging static content.
• Failure to activate a screen saver, or a periodic screen refresh application may result in severe “burn-in” or “after-image” or “ghost image” symptoms that will not disappear and cannot be repaired. The damage mentioned above is not covered under your warranty.

Image appears distorted. Text is fuzzy or blurred.

• Set the PC’s display resolution to the same mode as monitor’s recommended screen native resolution.
  Green, red, blue, dark, and white dots appears on the screen

• The remaining dots are normal characteristic of the liquid crystal used in today’s technology, Please refer the pixel policy for more detail.
  The “power on” light is too strong and is disturbing

• You can adjust “power on” light using the power LED Setup in OSD main Controls. For further assistance, refer to the Service contact information listed in Regulation & Service Information Manual and contact Philips customer service representative.

General FAQs

Q1: When I install my monitor what should I do if the screen shows ‘Cannot display this video mode’?

Ans.: Recommended resolution for this monitor: 1280 x 1024 @ 60 Hz.

• Unplug all cables, then connect your PC to the monitor that you used previously.

• In the Windows Start Menu, select Settings/ Control Panel. In the Control Panel Window, select the Display icon. Inside the Display Control Panel, select the ‘Settings’ tab. Under the setting tab, in box labelled ‘desktop area’, move the sidebar to 1280 x 1024 pixels.

• Open ‘Advanced Properties’ and set the Refresh Rate to 60 Hz, then click OK.

• Restart your computer and repeat step 2 and 3 to verify that your PC is set at 1280 x 1024 @ 60 Hz.

• Shut down your computer, disconnect your old monitor and reconnect your Philips LCD monitor.

• Turn on your monitor and then turn on your PC.
  Q2: What is the recommended refresh rate for LCD monitor?
  Ans.: Recommended refresh rate in LCD monitors is 60 Hz, In case of any disturbance on screen, you can set it up to 75 Hz to see if that removes the disturbance.
  Q3: What are the .inf and .icm files? How do I install the drivers (.inf and .icm)?
  Ans.: These are the driver files for your monitor. Your computer may ask you for monitor drivers (.inf and .icm files) when you first install your monitor. Follow the instructions in your user manual, monitor drivers (.inf and .icm files) will be installed automatically.
  Q4: How do I adjust the resolution?
  Ans.: Your video card/graphic driver and monitor together determine the available resolutions. You can select the desired resolution under Windows ® Control Panel with the “Display properties”.
  Q5: What if I get lost when I am making monitor adjustments via OSD?
  Ans.: Simply press the OK button, then select ‘Reset’ to recall all of the original factory settings.
  Q6: Is the LCD screen resistant to scratches?
  Ans.: In general it is recommended that the panel surface is not subjected to excessive shocks and is protected from sharp or blunt objects. When handling the monitor, make sure that there is no pressure or force applied to the panel surface side. This may affect your warranty conditions.
  Q7: How should I clean the LCD surface?
  Ans.: For normal cleaning, use a clean, soft cloth. For extensive cleaning, please use isopropyl alcohol. Do not use other solvents such as ethyl alcohol, ethanol, acetone, hexane, etc.
  Q8: Can I change the color setting of my monitor?
  Ans.: Yes, you can change your color setting through OSD control as the following procedures,

• Press “OK” to show the OSD (On Screen Display) menu

• Press “Down Arrow” to select the option “Color” then press “OK” to enter color setting, there are three settings as below.
  1. Color Temperature: The six settings are 5000K, 6500K, 7500K, 8200K, 9300K and 11500K. With settings in the 5000K range the panel appears “warm, with a red-white color tone”, while a 11500K temperature yields “cool, bluewhite toning”.
  2. sRGB: This is a standard setting for ensuring correct exchange of colors between different device (e.g. digital cameras, monitors, printers, scanners, etc).
  3. User Define: The user can choose his/ her preference color setting by adjusting red, green blue color.

Note
A measurement of the color of light radiated by an object while it is being heated. This measurement is expressed in terms of absolute scale, (degrees Kelvin). Lower Kevin temperatures such as 2004K are red; higher temperatures such as 9300K are blue. Neutral temperature is white, at 6504K.
Q9: Can I connect my LCD monitor to any PC, workstation or Mac?
Ans.: Yes. All Philips LCD monitors are fully compatible with standard PCs, Macs and workstations. You may need a cable adapter to connect the monitor to your Mac system. Please contact your Philips sales representative for more information.
Q10: Are Philips LCD monitors Plug-and- Play?
Ans.: Yes, the monitors are Plug-and-Play compatible with Window 10/8/8.1/7, Mac OSX.
Q11: What is Image Sticking, or Image Burnin, or After Image, or Ghost Image in LCD panels?
Ans.: Uninterrupted display of still or static images over an extended period may cause “burn in”, also known as “after-imaging” or “ghost imaging”, on your screen. “Burn-in”, “after-imaging”, or “ghost imaging” is a well-known phenomenon in LCD panel technology. In most cases, the “burned in” or “atter- imaging” or “ghost imaging” will disappear gradually over a period of time after the power has been switched off.
Always activate a moving screen saver program when you leave your monitor unattended. Always activate a periodic screen refresh application if your LCD monitor will display unchanging static content.
Warning
Failure to activate a screen saver, or a periodic screen refresh application may result in severe “burn-in” or “after-image” or “ghost image” symptoms that will not disappear and cannot be repaired. The damage mentioned above is not covered under your warranty.
Q12: Why is my Display not showing sharp text, and is displaying jagged characters?
Ans.: Your LCD monitor works best at its native resolution of 1280 x 1024 @ 60 Hz. For best display, please use this resolution.
Q13: Where can I find Regulation & Service Information Manual mentioned in EDFU?
Ans.: Regulation & Service Information Manual can be download on the Philips website support page.

© 2014 Koninklijke Philips N.V. All rights reserved.
This product was manufactured and brought to the market by or on behalf of Top Victory Investments Ltd. or one of its affiliates.
Top Victory Investments Ltd. is the warrantor in relation to this product.
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. used under license.
Specifications are subject to change without notice.
Version:M419SQE1T

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>