SP tools SP81439 LED Pen Work Light User Manual

SP Tools SP81439 LED Pen Work Light

IMPORTANT
ALL PERSONS WHO ARE TO USE THIS EQUIPMENT MUST THOROUGHLY READ AND UNDERSTAND THIS INSTRUCTION MANUAL PRIOR TO OPERATION.

INTRODUCTION

The SP81439 Chip-on-Board (COB) Light Emitting Diode (LED), adjustable magnetic base, rechargeable work light & penlight uses advanced technology in a multi-function chassis to bring Light where you need it quickly and conveniently. Since the COB LEDs take up less space and provide the highest potential, an extremely bright light that appears like a single panel can be obtained. This allows for lightweight, low profile design and wide beam transmission, in an extremely portable yet versatile package specifically aimed at hands-free operation. Its small size and flexibility make it ideal to keep in your toolbox, glove box, workbench or just stuck to the fridge. It will always be on hand, ready for whenever the light is needed.

Scope of Delivery:

Rechargeable, Pen Light • USB charging cable • User Manual

Features

• Long-life high-intensity COB light-emitting diodes
• Impact resistant Polymer case
• Swivelling magnetic pocket clip
• Portable work light or penlight
• Rechargeable lithium-ion Battery
• USB charging system

Technical Specifications

• Emitter: Chip On Board (COB) Light Emitting Diode (LED)
• Work light: 130Lumen
• Pen Light: 50 Lumen
• Dimensions: Length 80mm, Width 20mm, Height 27.5mm
• Weight : 7. 1 g
• Battery Voltage: 3.7v (Lithium Ion)
• Charging Input voltage: 5v DC (via USB cable supplied)
• Charging Time : 2Hour
• Working Environment: Dry, Non-Flammable, less than 50
• Maximum Operating Temperature: 50°C

Intended Use
This device is intended for light commercial, private and domestic use in dry, non-hazardous environments.

Operating Instructions

1. POWER BUTTON:
   1st Press – Work light – ON 2nd Press – Penlight – ON 3rd Press – OFF

2. MAGNETIC Clip:
   on 150-degree swivel mount

3. CABLE :
   Connects torch to USB port for charging

Charge the torch before use:

1. Connect the cable (supplied) to any suitable USB port. USB ports from your, computer, phone charger, vehicle, or portable power supplies can all be used to charge this torch. (Charging time: 2 Hours)
2. When fully charged the LED on the base of the torch will change color from red to green, indicating that the battery is fully charged.
3. Disconnect the cable and the torch is ready for use.
4. Press the On/Off button once to illuminate the work light and twice to illuminate the Penlight. A third press will turn it off.

Cleaning and Maintenance

• Keep your torch dry, clean, and free from oil, water, and grease.
• Use a mild detergent on a clean cloth to clean the outside of the tool, when necessary.
• Store in a cool location, (high temp will reduce battery life).

Disposal & Recycling Information

When the tool reaches its end of life, take it to a collection point designated by local authorities for E-waste. The separate collection and recycling of your product at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment.

LIMITED WARRANTY

This Limited Warranty applies only to new products* distributed by SP Tools Pty Ltd (“SP Tools”). It is a condition of this Limited Warranty Policy that the purchaser read the owner’s manual for the product and only use the product to the extent or for the purposes stated therein. The purchaser must also ensure that all servicing requirements are completed as listed in the owner’s manual (said servicing is at the owner’s expense). We recommend that all servicing is completed by an authorized service agent and that records of said servicing are retained by the purchaser as proof in the event of a warranty claim. Whilst the owner’s manual, packaging, and/or other documentation supplied with SP Tools’ products may provide details in respect of a Limited Warranty, the terms set out herein supersede these matters, and this Limited Warranty applies in their place. This warranty is no less advantageous than otherwise described in such other documentation.

SP Tools agrees, subject to the terms and conditions specified below, to repair or replace at SP Tools’ cost, the product purchased by you when the product does not perform in accordance with its specifications during the limited warranty period, due to any fault in manufacturing, materials and/or workmanship. SP Tools is not liable to repair or replace products that the purchaser uses in a manner that is inconsistent with the owner’s manual or in the circumstances set out in paragraphs 1.1 – 1.7 below. The benefits to the purchaser under this warranty are in addition to other rights and remedies under the Competition and Consumer Act 2010 (Cth). The limited warranty period, within which a defect in the product must appear, commences from the date of purchase and ceases on expiration of the specified term below.

THE LIMITED WARRANTY PERIOD
SP Speciality Tools – 12 Months

THE PURCHASERS ATTENTION IS DRAWN TO THE FOLLOWING
To the extent permitted by law and subject to this Limited Warranty, and as part of the terms of the sale of the equipment or part thereof: SP Tools shall not be liable for any form of loss, damage, cost, injury, or harm of any kind (whether direct, indirect, special or consequential) howsoever arising from the use or supply of the equipment to the purchaser.

EXCLUSIONS TO LIMITED WARRANTY POLICY

This Limited Warranty will not apply where the equipment or any part thereof:

1. Fails due to an accident (including liquid spillage), abuse, misuse, neglect, or normal wear and tear;
2. Has been used in a manner other than for which it was originally designed;
3. Has been tampered with or is otherwise than as supplied by SP Tools;
4. Where any damage, malfunction, or other failures of the equipment or any part thereof resulted directly or indirectly from unauthorized persons, adjusting or failing to adjust any part requiring normal maintenance and service (examples include adjustment of tappets, air filter maintenance, lubrication, and tightening of screws nuts, and bolts);
5. Malfunctions due to the use of defective or incompatible accessories;
6. Is damaged by lightning or thunderstorm activity; or
7. Has been transported to a country where no authorized Service Agents exist.

CLAIMING WARRANTY

This Limited Warranty may be claimed in the following manner:

1. In order to make a claim under this Limited Warranty, the purchaser must deliver the equipment or any part thereof to an SP Tools authorised repair agent and pay all costs of transportation and all costs incidental to making a claim under this Limited Warranty. The purchaser must first contact SP Tools (contact details described above) and request the delivery address of an SP Tools authorized repair agent.
2. The purchaser must deliver to the repair agent written reasons why the purchaser considers that the purchaser has a claim under this Limited Warranty and must provide all necessary details, including:

• The place, date, and from whom the unit or part was purchased.
• The unit or part involved Model and Serial Number.
• The defect, malfunction, or failure in respect of which the claim is being made.
• Proof of service of the unit or part (if applicable)
• Proof of purchase in respect of the unit or part.

3. If the Limited Warranty claim is valid, the repair agent will carry out repairs and return the product at no charge to the purchaser. These repairs are limited to the Limited Warranty fault identified and as such will not include any other faults due to misuse, abuse, failure to maintain, fair wear and tear, or the replacement of serviceable items such as oil, spark plugs, air filters, fuel, etc.

Our goods come with guarantees that cannot be excluded under Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Note: Units which are failing to perform in accordance with specifications due to non-warrantable causes will be subject to freight, repair, and or quote charge

AFTER-SALES SUPPORT:
WWW.SPTOOLS.COM

AUSTRALIA: Visit the website’s contact page to get in touch with your local service department.
INTERNATIONAL: Use the county selector to get in touch with your service department in your country or region.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>