OPTO-EDU A11.1323 Biological Microscope Instruction Manual
- June 6, 2024
- OPTO-EDU
Table of Contents
OPTO- EDU (BEIJING)CO., LTD.
A11.1323
Biological Microscope Instruction Manual
Please read this manual carefully before using a microscope!
Al 1 1323 is a very good choice for students especially appreciated when the budget is limited. All models are equipped with AC110/220V and an internal battery. which can meet your different needs Achromatic 4X. 10X, 40X objective enable utmost 400X optical magnification. which can clearly observe biological slices. biological cells bacteria and living tissue culture etc.
A11.1323 Student Microscope
Head| Monocular Head. 45′ Inclined. 360′ Rotatable
Eyepiece| \Af1OX
Objective| Achromatic 4X
Achromatic 10X
Achromatic 40X. Spring
Nosepiece| Triple Revolving Nosepiece
Stage| Plain Stage \Nith Specimen Clips. Size 90x9Omm
Condenser| Single Lens N.A.0.65 Wth Six-holes Disc Diaphragm
Focusing| Coaxial Coarse & Fine Focusing Adjustment. With Safty Stop
Light Source| LED Light
Power Supply| External AC/DC Adaptor Or By 3xAA Batteries(Not Included)
Size| 16x11x31cm. Net Weight 1.7KG
Student microscope is designed for tertiary institutions and primary and secondary schools, which is convenient to observe biological slices, biological cells. bacteria and living tissue culture, fluid precipitation observation, and research. It is widely used in teaching demonstration, biochemical experiments, clinical research ect.
How to Use
- Open the package and take out the microscope, insert the desired eyepiece, put on the rubber eyepiece cover, and tighten the anti-theft screws (ensure the eyepiece free rotation)
- Take off the objective cover, switch on. Select the appropriate light source (top light or bottom light).
- Put the objects in the center of a stag, then adjust the focusing knob. Observe the right eyepiece to make the image clear (depending on the situation to select brightness). Adjust the left diopter again to make the left and right images both clear.
- Rotate objective cover. select appropriate objective multiple.
- When needed, can be screwed into an auxiliary objective at the bottom of the lens cover.
- If feel the torque is too tight when using, rotate the focusing knob arduously; Or the torque too light, observing head auto-drop down, please use a wrench to adjust the torque of the inside focusing knob to be appropriate.
Maintenance and Care
- Whether the instrument is in use or storage should avoid dust, humidity, cold, heat, or PH steam.
- Chemicals shall not be placed near the instrument, even more in the microscope cabinet (except desiccant).
- When not in use, the whole instrument should be covered by a dust cover to keep it clean. If there is dust on the lens surface, don’t wipe it by hand, only by brush.
- If there is dust on the lens surface, can use clean old linen or cotton cloth dipped in a small amount of pure alcohol and ether mixture (1:1), or benzoline and xylene to wipe gently. Don’t touch the lens surface by finger.
- Due to time, grease on gear, rack, sliding groove surface, and sliding cylinder will bond with dust into dirt or hardened, leading to rotating the coarse knob difficultly, can use xylene to clean, then add a little acid-free animal grease or acid-free Vaseline, can’t use another grease.
- When microscope and eyepiece are not in use, should be covered with cloth or glass to prevent dust.