motorola MOTO BUDS 100 True Wireless Bluetooth Earbuds with Microphone User Guide
- June 6, 2024
- Motorola
Table of Contents
Model No.: MOTO BUDS 100
Frequency Band: 2.402 – 2.480GHz
Maximum RF power: 6 dBm| FCC ID: 2ARRB-VB100
IC: 20353-VB100
Working temperature: -10°C–45°C
---|---
Quick Start Guide
Charging:
Fully charge before use
The device can be powered through a micro USB from any
CE compliant power source that implements the European
interface as requested by EN 301 489-52.
Pairing:
2.1 Ensure both buds are inside the charging case and take out both buds. The buds will flash blue and red.
2.2 Select “MOTO BUDS 100 from the smartphone Bluetooth menu.
Fitting:
3.1 To optimize the best fit and audio experience, it is recommended to try different earbud sizes.
3.2 Insert the MOTO BUDS into your ear and rotate to fit comfortably.
Basic Operation:
Additional Operation
Factory reset| 1. Ensure earbuds are not connected to the phone
2. Double press MFB and then hold MFB for 5 seconds until LED shows blue and
red
3. Put both buds into the charging case
Reject a call| MFB 2sec
Receive incoming and on hold ongoing call| Single Press MFB
LED Indicator
Pairing| Red-blue flash
Standby| Blue flash
Charging| Red steady
Fully charged| Off
Battery low| Red flash
Global V13
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>