ReXel Secure Series Cross Cut Paper Shredder Instruction Manual

: October 27, 2023
: Rexel

Table of Contents

Rexel Secure Series Cross-Cut Paper Shredder
Operation Slide Switch models
Operation Push Button models
Warning symbols
Accessories
Button and Indications
Shredding Media
Waste Electrical and Electronic Equipment (WEEE)
Guarantee
WHAT WE WILL DO TO HONOUR THIS WARRANTY
Documents / Resources

Rexel Secure Series Cross-Cut Paper Shredder

Specifications

Amperage

Secure S5| P2| 5|

10

|

3

|
Secure X6|

P4

| 6
Secure X8| 8| 14
Secure X10| 10| 18
Secure X6-SL| 6| 10|

6

P5

| 3| 10
Secure MC4| 4| 14
Secure MC6| 6| 18
Secure MC3-SL| 3| 10
Secure MC4-SL| 4| 14
Secure MC6-SL| 6| 18

Operation Slide Switch models

Switching machine on

Manual shredding

Removing Jam

Operation Push Button models

Switching machine on

Manual shredding

Removing Jam

Please read and keep these important safety instructions
For a full copy of the operating instructions, hints & tips, and troubleshooting guide, please visit www.rexeleurope.com/support or www.leitz.com

The following symbol which is found on the product indicates you could be seriously hurt or killed if you open the machine. DO NOT OPEN.

Warning: Do not touch cutters, beware of sharp edges.
Warning: Moving parts hazard, keep hands away from rollers whilst in operation.

Please read all the safety information and the instructions; the manufacturer is not liable for cases of material damage or personal injury caused by incorrect handling or non-compliance with the safety instructions. In such cases, the warranty will be voided.
Only use the unit for its intended purpose.
The unit must only be connected to a supply voltage corresponding to the electrical rating shown on the unit.
The unit should be connected to a socket outlet near the equipment that is easily accessible.
Do not connect multiple adaptors or use an extension cable.
Do not attempt to service or repair the unit yourself.
If recycling, separate paper, and credit card shreds.
Do not use this unit if the cable or plug has been damaged.
Care should be taken when moving equipment to avoid any unlevelled surfaces.
The device is intended for use indoors. Never use outdoors.
Keep the device away from moisture.
Be vigilant at all times, and always be careful what you are doing. Do not use electrical equipment if you are lacking in concentration or awareness, or are under the influence of drugs, alcohol, or medication. Even a moment of inattentiveness can lead to serious injuries when using electrical equipment.
Do not attempt to open, modify or repair the device. Do not drop, puncture, break or expose to high pressure.
Alterations to the device and technical modifications are not permitted.
Check the device and cable (and if applicable, the adapter) for any damage before use. If there is
any visible damage, a strong odor, or excessive overheating of components, unplug all the components immediately and stop using the device.
The shredder must be disconnected from the power source if not used for an extended period of time.
Do not use spray cleaners or spray lubricants as these may present a risk of flash fire.
Never bypass the safety interlock (strictly forbidden and dangerous, especially when the unit is connected to a power source).
Do not lean on the shredder door; this may damage the door and will not be covered by your warranty.
Failure to follow these instructions could result in damage/injury and will invalidate your guarantee.

Warning symbols

Warning symbols
Keep loose jewelry clear
No credit cards
Ties and loss of clothing hazard
Keep long hair clear
Do not reach into the opening
This equipment is not intended for use by children
No aerosols. Do not use spray cleaners or lubricants, as these may present a risk of flash fire.
Max sheet capacity
No CDs
No heavy-duty staples above 26mm
Warning: moving parts

Accessories

Only use Rexel accessories:
Oil Sheets (20) – 2101949 Oil Sheets (12) – 2101948

Controls and Indications
Slide Switch and Indications

Icon	Type	Slide Switch/indication & action
Slide switch	Auto-start slide to position for shredding
Reverse slide to position
Forward slide to position

Status Indicators

| Off slide to position
| Ready indication (ensure the head is on the bin and the slide switch is in the Auto-start position)

| Over-heated indication (allow to cool)

Button and Indications

Icon	Type	Button/indication & action

Control buttons

| Auto-start and stand-by button

(press one time)

| Manual reverse button (hold down)
| Manual forward run button (hold down)
| Over-heated indication (allow to cool)
| Overloaded / Jam indication (Reduce sheets

/ remove jam)

Shredding Media

CAN shred the following

Stapled paper, 25mm within the corner
26/6 and 24/6 or smaller staples
Small sized paper
Paperclipped paper, 25mm within the corner
Capable of shredding small/medium paperclips (max. wire thickness = 0.9 mm)
80/100gsm paper
Thick paper or card <200gsm
Glossy paper or a sheet covered with print on both sides.
Multiple folded sheets (A3 sheets folded in half).

CANNOT shred the following

Heavy-duty staples. Check the staple leg length is not greater than 6mm.
Large clips. Check the length of the paperclip is not longer than 32mm.
Plastic sheets, laminated documents, and plastic folders.
Bulldog clips
Bound documents
Credit cards
Adhesive labels
Magazines or other documents bound by multiple staples or clips.
No aerosols
No Oil, only oil sheets
CDs & DVDs

Waste Electrical and Electronic Equipment (WEEE)

At the end of its useful life, your product is considered to be WEEE. As such, it is important to note that WEEE is not to be disposed of as unsorted municipal waste. It is to be collected separately such that it can be disassembled so its components and materials can be recycled, re-used, and recovered (burned for energy content in the production of electricity).
Public collection points have been set up by municipalities for the collection of WEEE, free of charge to you.
Please return your WEEE to the collection facility nearest your home or office.
If you have difficulty locating a collection facility, the retailer that sold you the product should accept your WEEE.
If you are no longer in contact with your retailer, please contact ACCO for assistance with this matter.
Recycling WEEE is geared toward protecting the environment, protecting human health, preserving raw materials, improving sustainable development, and ensuring a better supply of commodities in the European Union. This will be achieved by retrieving valuable secondary raw materials and reducing the disposal of waste. You can contribute to the success of these goals by returning your WEEE to a collection facility.
Your product is marked with the WEEE symbol (wheelie bin with an X through it). This symbol is to inform you that the WEEE is not to be disposed of as unsorted municipal waste.

Guarantee

Operation of this machine is guaranteed for two years from the date of purchase, subject to normal use. Within the guarantee period, ACCO Brands Europe will at its own discretion either repair or replace the defective machine free of charge. Defects due to misuse or use for inappropriate purposes are not covered under the guarantee.
Proof of the date of purchase will be required. Repairs
or alterations made by persons not authorized by ACCO Brands Europe will invalidate the guarantee.
It is our aim to ensure that our products perform to the specifications stated. This guarantee does not affect the legal rights which consumers have under applicable national legislation governing the sale of goods.
This guarantee does not apply to Australian customers—see warranty on page 104.

ACCO Brands Australia Pty Ltd (ABN 16 000 265 047)
This document details the terms and conditions of the warranty against defects provided with this product. Please disregard any other representation contained on this product’s packaging or provided with this product that constitutes or appears to constitute a warranty against defects.

WARRANTY AGAINST DEFECTS
This product comes with an ACCO Brands Australia Pty Ltd (ACCO Brands) warranty against defects, the details, and conditions of which are set out below.
Subject to the terms and conditions set out in this warranty, ACCO Brands will (at ACCO Brands’ option) repair or replace this product with a new or refurbished product if it contains defects that are a result of faulty manufacturer workmanship or materials.
PERIOD OF WARRANTY
You may claim this warranty if you notify ACCO Brands within 2 years of the date of purchase in the manner set out below and if you comply with the other conditions of this warranty.
WHO CAN CLAIM UNDER THIS WARRANTY?
This warranty applies to and can be exercised by the original purchaser of the product only. This warranty is not transferrable to any other person or party under any circumstances.
WHAT THIS WARRANTY DOES NOT COVER
If we reasonably consider that any of the following situations are present, this warranty does not apply. The situations to which this warranty does not apply are:

any cosmetic damage;
any product where the product’s serial number is no longer present or visible;
loss or damage caused by factors beyond ACCO Brands’ control including, but not limited to, damage or failure due to power fluctuations, overload, excessive heat or humidity;
any product which has not been installed and/or maintained according to any care or operating instructions provided with the product;
any alterations or repairs to the product not authorised in writing or performed by ACCO Brands;
damage or defects caused to the product due to unusual, abnormal, non-recommended or negligent use of the product;
any wearable component in any product, including but not limited to blades, slitters, cutting sticks, cutting light bulbs, drill bits, base boards, feed wheels, separators, fuses, cutters and carriers, manual punches and cutting disks, light bulbs and staple inserts; or
liability based on any service agreement entered into with third parties.

PROCEDURE FOR MAKING A CLAIM
Any claim made under this warranty must be made by sending the faulty product to ACCO Brands at the address noted below, together with the following information in writing:

Your name or company name (if applicable);
Your address;
Your telephone number;
Contact name;
Machine type, model number, and serial number;
Proof of your purchase of this product, such as your receipt; and
A detailed description of the defect you believe the product to have.

WHAT WE WILL DO TO HONOUR THIS WARRANTY

Upon delivery to us, we will organize for the product to be assessed to determine if the fault or problem is covered by this warranty. We will advise you by telephone, email, or in writing whether the fault is covered by this warranty.
STATUTORY GUARANTEES AND YOUR OTHER RIGHTS AND REMEDIES
This warranty against defects is provided in addition to other rights or remedies you, as a consumer, may have under a law in relation to this product.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

CONTACTING US
ACCO Brands Australia Pty Ltd (ABN 16 000 265 047)
Australian and New Zealand Distributor
Locked Bag 50
Blacktown BC NSW 2148
For products purchased in Australia call: 1300 278 546
Email:[email protected]
For products purchased in New Zealand call: 0800 800 526
Email:[email protected]
https://tm.by
ACCO Brands Europe
Oxford House
Aylesbury HP21 8SZ
United Kingdom
www.accobrands.com

Documents / Resources

| ReXel Secure Series Cross Cut Paper Shredder [pdf] Instruction Manual
Secure X6, Secure MC3-SL, Secure X6-SL, Secure X10-SL, Secure S5, Secure MC6, Secure X10, Secure MC4, Secure X8, Secure MC4-SL, Secure X8-SL, Secure MC3, Secure MC6-SL, Secure Series Cross Cut Paper Shredder, Cross Cut Paper Shredder, Cross Paper Shredder, Cut Paper Shredder, Paper Shredder, Shredder
---|---