ReXel 1-01046 Flush Mount Trim Kit Installation Guide
- June 15, 2024
- Rexel
Table of Contents
1-01046 Flush Mount Trim Kit
Installation Guide
Installing the Flush Mount Trim Kit
The Flush Mount Trim Kit (PN: 1-01046) is used for indoor installations to
easily cover square holes cut into the wall during installation.
The overall dimensions when mounted are 1123 x 405 mm (44.2 x 15.9 in).
- Place the two (2) metal Trim Mounting Brackets directly against the Span Panel’s top and bottom faces, using the triangular decals to center.
- Affix the upper and lower Trim Mounting Brackets to the wall or stud using four (4) mounting screws.
- Snap the Trim Piece in place, ensuring all four mounting sockets are fully engaged.
Installing
Trim Mounting Brackets
Snapping Trim Piece in Place
Span 1-00800-xx Installation Manual (rev. 2022-01-28)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>