OMRON BP7250CAN 5 Series Upper Arm Blood Pressure Monitor User Guide

: June 6, 2024
: Omron

Table of Contents

Download the App
Install Batteries
Pair Your Smart Device
Apply the Arm Cuff
Sit Correctly
Take a Measurement
Check your reading on the app
FAQ
Tips
Trademark
For Customer Service
Read User Manual Online (PDF format)
Download This Manual (PDF format)

OMRON BP7250CAN 5 Series Upper Arm Blood Pressure Monitor User Guid

Download the App

Scan the code below with your smart device camera or visitOmronHealthcare.com/app to find the OMRON compatible app for this product.

Install Batteries

Push down on the hook of the battery cover and pull downward.
Insert 4″AA”alkaline batteries.
**Close the battery cover. The year flashes.

**

Pair Your Smart Device

**Make sure that your monitor is off.

** If the display is showing any information, press [START/STOP] button to turn your monitor off.

**Enable Bluetooth® on your smart device.
Open the app and follow the instructions.
****
The date and time will automatically be set when your monitor is paired with the app.
To set the date and time manually, refer to sub-section 2.2 of the instruction manual.

Apply the Arm Cuff

Insert the air plug into the air jack securely until it clicks.
Place your hand through the cuff loop, then pull the cuff until it reaches your upper left arm.

The bottom edge of the arm cuff should be 0.5 inch above the inside elbow.
Wrap the cuff securely.
Make sure that air tube is on the inside of your arm.

Sit Correctly

Take a Measurement

Press the [START/STOP] button.
Remain still until the arm cuff deflates.
After the measurement, your reading is displayed.

Check your reading on the app

Open the app on your smart device and follow the instruction.
Check your readings on the app. To turn off the monitor, press the [START/STOP] button.

FAQ

Why are my blood pressure readings sometimes different?
Your blood pressure changes constantly based on your daily activities and time of day. Because of this, some fluctuations can be expected. That’s why it is important to use averages over time to compare readings. Because each person is different, it is important to consult with your physician about what your numbers mean to you.
Why could my physician’s reading be different than my readings taken at home?
Having your blood pressure measured by a healthcare professional in a physician’s office can cause nervousness and may result in an elevated reading. Because these readings can vary considerably, you should take your blood pressure on a regular basis at home and share your results with your healthcare provider.

Tips

For accurate readings:

Avoid bathing, drinking alcohol or caffeine, smoking, exercising and eating for 30 minutes before taking a measurement.
Rest for at least 5 minutes before taking a measurement.
Sit quietly with your legs uncrossed and your feet flat on the floor.

Make sure that your blood pressure monitor and smart device are successfully paired, and the app is open on your smart device, before transferring your readings to the app.

Trademark

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by OMRON HEALTHCARE Co., Ltd. is under license. Other trademarks and trade names are those of their respective owners.