amazon basics AB-SCSTPT-001U 2MP Wi-FI PT Camera Instruction Manual
- June 14, 2024
- amazon basics
Table of Contents
basics AB-SCSTPT-001U 2MP Wi-FI PT Camera
Instruction Manual
2MP Wi-Fi
PT Camera
AB-SCSTPT-001U
Important Safety Instructions
Read these instructions carefully and retain them for future use. If this product is passed to a third party, then these instructions must be included.
When using electrical products, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons including the following:
- This product is not intended for use by children.
- The socket-outlet shall be installed near the product and shall be easily accessible.
- Only use this product with provided power adapter (model SA-PEA1005DP).
- This product contains no user serviceable parts and requires little maintenance. Leave any servicing or repairs to qualified personnel only.
- Do not open the product housing. Do not insert any foreign objects into the inside of the housing.
- Disconnect the product from the socket- outlet when not in use and before cleaning.
- Do not point the products lens directly into the sun o at other intense light sources that could affect the image quality, and also shorten the service life of the image sensor.
- Do not point the product at doors, windows or the garden of your neighboring apartment. This is not allowed even if it is visible from public locations or your own home. Violating the privacy of others is an offense in many countries.
- Under certain circumstances, video recording may be prohibited by law. This product should be used only in compliance with all applicable laws and regulations of the place of residence.
Intended Use
-
This product is only intended for private surveillance of house entrances, garages, etc.
Do not use it for industrial or commercial purposes. -
This product is intended to be used in dry indoor areas only.
Product Description
Before First Use
DANGER Risk of suffocation!
Keep any packaging materials away from children and pets – these materials are
a potential source of danger, e.g. suffocation.
- Remove all the packing materials.
- Remove and review all components before installation.
- Check the product for transport damages.
- Before connecting the power adapter to the power supply, check that the power supply voltage and current rating corresponds with the power supply details shown on the power adapters rating label.
What You Need
Download and Install the App
Download and install ‘Smart Life’ application from the Google Play Store or App Store.
Register an Account
- Read the Privacy Policy and User Agreement and tap Agree to continue.
- Tap to sign up or log in with an existing account.
- Follow the on-screen instructions to register a new user account.
Connecting to Power
- Connect the micro-USB cable to the micro- USB charging port.
- Connect the other end of the USB cable to the power adapter.
- Plug the power adapter into a socket-outlet. It takes approximately 30 seconds before the indicator light flashes and a beeping sound can be heard continuously.
- The device is now ready for pairing.
Using a Micro-SD card (not included)
NOTICE
The maximum capacity of Micro-SD card supported is 128 GB.
It is recommended to use a Micro-SD card with a reading/writing speed of no
less than Class 10.
- Disconnect the device from the power supply.
- Rotate the lens upwards to reveal the Micro- SD card slot.
- Insert the Micro-SD card into the card slot with its contact points facing upwards and push until it locks in place.
- Re-connect the device to the power supply.
- Once the Micro-SD card has been installed, configure the card through the ‘Smart Life’ app.
Pairing
-
Onthe Smart Life App, tap on Add Device or”+”
-
Go to Camera & Lock tab and tap on Smart Camera (Wi-Fi).
-
Follow the on-screen instructions and tap Next to continue.
-
Connect to a local Wi-Fi network and tap Next.
-
Scan the QR code on your device with the camera lens approximately 15 – 20 cm away.
This process can take up to 30 seconds. -
Once the QR code is recognized, a prompt can be heard. Tap Heard a Prompt to continue.
The device will begin pairing. -
Once the pairing is complete, tap to change the device name. Tap Done to complete pairing.
-
The device is now paired and you are able to control it by using the Smart Life App.
Basic Smart Life App Functions
Use to add and manage connected devices, or give voice prompts
In the Home menu, tap on the paired device to:
| Switch between HD (high definition) and SD (standard definition)
---|---
| Sound on/off
| Set full vertical screen/normal screen size
| setlandscape full screen
| Take photo
| Hold to speak
| Video recording start/stop
| Additional settings
Resetting the Device
- To reset the device back to factory settings, press and hold the reset button for 5 seconds while the device is on.
- The device emits a high pitched beep once and then the lens rotates to reset itself.
- Once the lens stops moving, the device beeps.
continuously meaning it is ready for pairing.
Installation
WARNING
Take special precautions when working on heights, for example, while using a
ladder.
Use the right type of ladder and ensure it is structurally sound. Use the
ladder in accordance with the manufacturer’s instructions.
-
This device should be installed and maintained only by an experienced adult. If in doubt, consult a professional.
-
Before mounting, determine the suitable mounting location. The device must be fixed to a wooden or masonry/concrete wall or ceiling using fasteners that are appropriate for the mounting surface. Do not install on drywalls, wall boards or thin plywood.
The mounting surface must be capable of supporting the weight of the device. -
Do not drillinto any pipes or power lines beneath the surface during mounting holes preparation. Use voltage/metal detector before drilling any holes to eliminate any such potential risks.
-
Do not hang anything on the device.
Choosing a suitable location
- The device can be placed on a table top, shelf or can be mounted on a wall or ceiling with the provided bracket and screws.
- Install the device where it is not accessible to children.
- install the device at least 20 cm away from walls or anything that may obstruct its view or rotation.
- Choose a location and height where you can get the desired view, and can reach a socket- outlet easily.
Wall or Ceiling Installation
NOTICE
- For wall installation, ensure the wall bracket opening is facing upwards.
- Switch off and disconnect the device from the power supply before installation.
Tools required (not included):
- Place the wall bracket onto the surface of the chosen installation location and then mark the 2 drilling holes (Fig. 1).
- Drill 2 holes with a 4.4 mm drill bit and then insert the wall plugs (Fig. 2).
- Secure the wall bracket using the provided screws (Fig. 3).
- Insert and tighten the hex bolt to the base of the device (Fig. 4).
- Slide the device into the wall bracket opening (Fig. 5).
Cleaning and Maintenance
NOTICE
- Before cleaning unplug the device from the power supply.
- During cleaning do not immerse the electrical parts of the device in water or other liquids. Never hold the device under running water.
Cleaning
- o clean the device, wipe with a soft, slightly damp cloth.
- Wipe the device dry after cleaning.
- If there s dust or grease on the lens, clean the lens with clean soft cloth and isopropyl alcohol.
- Never use corrosive detergents, wire brushes, abrasive scourers, metal or sharp utensils to clean the device.
Storage
Store the device in its original packaging in a dry area. Keep away from
children and pets.
Frequently Asked Questions
Problem | Solution |
---|---|
Thedevice does not switch on. | D Checkif the device is connected to the power |
supply.
» Check the power supply is working.
» Wait approximately 30 seconds for the device to initialize.
The Smart Life App cannotfind the device.| » Ensure the Wi-Fi router and the
device is on.
D Ensure the device and your smart device are connected to the same Wi-Fi
router during initial configuration.
» Ensure all the cables are properly connected.
) Reset the device.
Poorimage quality.| D Clean the device lens.
» Other wireless devices may interfere with the signal strength. Leave as
much space as possible between the device and other wireless devices.
» Increase your device screen brightness.
Motion detection is not working properly.| » Ensure motion detection function
is enabled in the Smart Life App.
» Clean the device as accumulated dirt may obstruct the motion detector
sensor.
Cannotrecord video.| D Ensure the micro-SD card has been installed correctly
and formatted.
» Make sure to use a Class 10 rated micro-SD card or faster.
» Format the micro-SD card when it is used for the first time.
Specifications
Camera
Model number | AB-SCSTPT-001U |
---|---|
Input voltage/current | 5v 1A |
Power consumption | 5W Max |
Resolution | Main stream: Full HD 1920 x 1080p, 1280 x 720p |
Auxiliary stream: 704 x 576p, 352 x 288p
Image compression| H.264
View angle| 100°
Pan/tilt range| Tilt: -10° to 75°
Pan: 0 to 355°
IR distance| Up to 15 meters
Minimum Illumination| Color 0.01 Lux @F1.2 Black and White 0.001 Lux @F1.2
Operating temperature| -5°Cto55°C
Operating humidity| less than 95 %
Storage temperature| 0 °C to 50 °C
Storage humidity| less than 95 %
Image sensor| 1/2.9″ cMOs
Shutter speed| 1/25 – 1/100,000 per
second
Focal length| 3.6 mm
Storage mode| Support Micro-SD card
(max 128 GB)
Max. Transmitted power| <20 dBm
Net weight (camera only)| approx. 0.184 kg
Dimensions (WxHxD)| approx.
7.4×10.9x 7.4 cm
Network
Wi-Fi range | Up to 50 m (open area) |
---|---|
WiFi frequency band | 2.4 GHz – 2.4835 GHz |
Network connection | |
Network protocols | TCP/IP, UDP, SMTP, NTP, DHCP, ARP |
Security | WPA2-PSK |
Suggested bandwidth | 2 Mbps or above |
Power adapter
Model number | SA-PEA1005DP |
---|---|
100-240 V-~ 50/60 Hz | |
Output | SV 1A |
Protection class | II |
Trademarks
- Android® is a registered trademark of Google LLC.
- i0S®is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license.
Amazon Brand – India E-waste Program
Recycle your old Amazon brand products and help protect the environment.
Consequences of Improper E-Waste Handling & Recycling:
E-waste when disposed or recycled improperly, can cause severe environmental
pollution and adversely affect the human body as they contain excess of toxic
chemicals like mercury, polybrominated flame retardants, barium, lithium and
PVC. The common process of burning of e-waste in informal e-waste recycling
and disposal facilities releases toxic gases into the atmosphere, causing
severe air pollution. Besides that, poor recycling and improper disposal of
e-waste leads to a lot of pollutants such as heavy metals like cadmium, lead
and persistent organic pollutants to be released into the atmosphere, which
further pollutes the eco-system and causes health hazards.
Alternately the practice of dumping of e-waste into landfills as followed by
the informal e-waste recycling and disposal facilities eventually makes the
hazardous and toxic components of e-waste seep into the eco-system including
the regional water tables, causing soil pollution and contaminating the water
table. Such contamination will affect nearby communities in an adverse manner
for much longer time.
Accidental breakage and damage of electronics and e-waste can pose a threat to
the environment. As long as the toxic components in electronics are enclosed
within the original manufacturer’s designed outer-shell of the gadget, they
don’t pose much of a danger as they have been engineered to contain any such
effects.
However, accidental breakage or damage of such electronics or e-waste can lead
to toxic elements leaking and contaminating their immediate environment.
Damage to the environment due to accidental breakage of e-waste is a major
concern in informal e-waste disposal and recycling facilities, so consumers
need to ensure that their e-waste is being disposed only through authorized
recycling points.
Amazon Brand Recycling Program (India):
Karosambhav, a recycling company, has been authorized to provide e-waste
disposal service to all customers who have purchased Amazon brand products.
Karosambhav has a PAN-India collection mechanism for collecting e-waste from
customers and for further disposal of such e-waste as per the E-Waste
(Management & Handling) Rules, 2016 effective October 1, 2016 and amendments
therein.
Karosambhav will provide e-waste drop off points and ensure environmentally
sound management of electronics that have reached their end-of-life phase.
Karosambhav has all the necessary authorizations from the appropriate nmental
agencies for their rocessing ies. Karosambhav ensures proper recycling and
disposal of e-waste, and does not incinerate, send e-waste to landfill or
export hazardous e-waste to other countries. This helps us protect the
environment from any hazardous consequences, which would be otherwise caused
by the inappropriate waste management of e-waste.
To know more about Karosambhav collection points and how to recycle your
Amazon brand product – (i) Log on to https://appario.in/e-waste-policy or
(ii) Call up Toll Free Number: 1800-2121- 434 or (iii) Write to –
engage@karosambhav.com
Instructions of handling the product during and after its use and Do’s and Don’ts with respect to handling the product:
Do’s:
a) Always look for information in the product’s user’s guide for end-of-life
equipment handling.
b) Ensure that only authorized recyclers handle your electronic products.
C) Always call local authorized e-waste collection centers to dispose products
that have reached end-of life phase.
d)When your used electronic products, batteries or accessories reach the end
of their life, always dispose them at your nearest authorized e-waste
collection center.
e) Wherever possible or as instructed, separate the packaging material
according to responsible waste disposal options and sorting for recycling.
f) Always ensure any glass surface is protected against breakage.
g) Kindly ensure that the product is properly packaged as per instructions
before handing it over to the authorized Recycler.
Don’ts:
a) Do not dismantle your electronic products on your own.
b)Do not throw electronics having “Do not Dispose” symbol on the product
package in your regular garbage bins along with municipal waste since it will
ultimately reach alandfill.
c) Do not give e-waste to informal and unorganized sectors like local scrap
dealers.
Be a Responsible User. Recycle your E-Waste for a Greener Planet.
Warranty & Service:
-
We grant 1 years warranty on the product commencing from the date of purchase against defects in manufacturing, materials, and assembly.
-
Within the warranty period, we will correct any defects in materials or workmanship, either by repairing or replacing the complete appliance, as we may choose, free of charge.
This warranty is valid to the original purchaser only. -
For customer service related queries, please contact us: [1800-419-2373] (available Monday to Saturday from 9:30 AM to 6:00 PM except national holidays). For warranty details, please visit the product page or call customer service number.
This Warranty excludes, or does not apply or becomes void if :
- Damage is caused by improper use, abuse or excessive use outside the intended purpose.
- Normal wear or use as well as defects that have a negligible effect on the value or operation of the appliance.
- Repairs or product modifications have been carried out by unauthorized organization or persons and if original Amazon Basics parts are not used.
- Consequential damages (including but not limited to loss of data or loss of income), nor compensation for activities done by yourself.
- The proof-of-purchase has been altered in any way or is made illegible.
- The model number, serial number or production date code on the product has been altered, removed or made illegible.
- The defect is caused by connecting peripherals, additional equipment or accessories other than those recommended in the user manual.