NEXSENS X2 Enviroment Data Logger Grounding Kit Instructions
- June 6, 2024
- NEXSENS
Table of Contents
X2 GROUNDING KIT
INSTRUCTIONS
Figure 1: Insert the adapter into one of the threaded holes on the X2.
-
Place the largely included lock-washer over the larger diameter end of the threaded adapter.
a. Tighten the adapter into any of the available (3) threaded holes on the X2 using a 1/2” socket or hex driver. Figure 1: Insert the adapter into one of the threaded holes on the X2. -
Position the grounding lug, followed by the small lock-washer and nut on top of the threaded adapter.
a. Tighten down the nut using a 7/16” socket or hex driver. -
Use a 5/32” Allen wrench to tighten down the ring terminal cable to the grounding lug. Figure 3: Connection between the grounding lug and terminal cable.
-
Follow the PM2 quick start card to mount the X2 to the buried 2” NPT pipe or another mount.
-
Slip the ring terminal of the cable between the washer and lock-washer on one side of the PM2 U-bolt.
a. Tighten securely with a 1/2” socket or hex driver.
Figure 4: Completed X2 grounding kit assembly.
937-426-2703
www.nexsens.com
2091 Exchange Court
Fairborn, Ohio 45324
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>