FUJIFILM X100V Lens Hood Protector with 49mm Filter Adapter Ring User Manual
- June 6, 2024
- Fujifilm
Table of Contents
FUJIFILM X100V Lens Hood Protector with 49mm Filter Adapter Ring
Product Overview
Instructions
- Remove the lens ring of the camera.
- Remove the front lens cap of the lens hood.
- Hold the inner and outer side of the adapter ring with one hand, unscrew the lens hood with the other hand
- Install the adapter ring.
- Install the 49mm filter (not included, and the f same can’t b e thicker than 4.5mm ).
- Install t he lens hood.!FUJIFILM X100V Lens Hood Protector with 49mm Filter Adapter Ring fig 7
- Slightly loosen the adapter ring, adjust t the lens hood t the middle and then tighten it again.
DISCLAIMER
- The Company assumes no liability for any risks related to or resulting from the debug and use of this product (including the direct, indirect or third-party losses).
- For any unknown sources of acquitting this product, we will not be at any services.
- The updating and changes of product firmware ano program may cause changes in function descriptions in this user manual, please read the instructions carefully before upgrading the firmware and use the corresponding- ing user manual.
- There may be a description that does not conform to this specification after firmware upgrade of the product Please be subject to the latest product information which is issued in the official website.
- The Company reserves all rights of interpretation to this product.\
Warranty Information
Client Info
- NAME
- Phone
- E-Mail Address
- Address
Product Information
- Product Name
- Product ModeL
- Date of Manufacture
- Warranty Period
Warranty Regulations
- .The warranty is guaranteed for 1 year from the dates of purchase；
- Some states or countries have no limitations on how long your confidentiality is guaranteed, so t the above warranty period may not apply.
- Unauthorized disassembly or damage caused by users are not covered by warranty.
Read User Manual Online (PDF format)
Loading......