sygonix 2226162 SY-VS-400 IP65 Surveillance Camera with PIR Motion Sensor and Wall Mount Instruction Manual

: June 6, 2024
: Sygonix

Table of Contents

Introduction
General Information
Requirements
Mobile App
Overview
Remove Device
FAQ
Troubleshooting
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

App Instruction Manual
SY-VS-400 IP65 Surveillance
Camera with PIR Motion Sensor
and Wall Mount
Item No. 2226162

Introduction

The connected device works through a Wi-Fi network together with the “Smart Life – Smart Living” app. This mobile app allows you to control, manage, and receive alerts on devices connected to your network.

General Information

Important Information
Observe the information in a red frame to avoid harming yourself or others, and prevent product damage.
Give information in an orange frame special attention.
The blue frame provides tips on product use and features.
Legal Notice
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data processing systems requires prior written
approval by the editor. Reprinting, also in part, is prohibited. This publication represents the technical status at the time of printing. Copyright 2022 by Conrad Electronic SE.

Requirements

Security
It is strongly recommended that you set up your Wi-Fi Router/Wi-Fi Access Point (AP) to use the most secure encryption option it supports.
App to Device Connection

To add a new device to the app, the mobile device that runs the app and the smart device must be connected to the same Wi- Fi network.
You can control the smart device through the app via Wi-Fi or using mobile device data.

Mobile App

Please note that the following instructions may change for future app versions.
Getting Started
First-time users should follow these steps:

Download and Install the App.
Create a User Account.
Log In.
Add Device.

Download and
Install the App
App Installation
Apps are available for Android and iOS mobile devices.
Visit the respective app store and search for “Smart Life – Smart Living”, or scan the QR code shown here.

http://e.tuya.com/smartlife

Make sure your mobile device satisfies the minimum requirements as outlined on the app store download page.

User Account
Your account settings are stored in the cloud.
Create a User Account A user account is required for you to operate the device.

Select Register to create an account.
Log In.
You will then be taken to the “Home Page”.

Home Page
The home page lists all devices that are under your account’s control. When you log in for the first time, the device list will be blank.

Swipe down from the top of the screen to refresh the page.

**A1**Access to “Home Management” settings, where you can name a home, set the home located on a map, and assign/add new devices to each room.
**A2**Enter a room to view or add devices.
**A3**View all devices at once.
**A4**Adds a new device; identical with **A14**
**A5**Return to “Home Page” view
**A6**Access “Tap-to-Run” and “Automation”.
**A7**Access your profile and settings.
**A8**Manage your rooms and assigned devices.
**A9**Remove one or all devices.
**A10**Switch between list and grid view,
**A11**Access submenus, see items A8, A9 and A10
**A12**Displays location information such as current temperature, humidity, air pressure, and wind speed.
**A13**Voice control.
**A14**Adds a new device; identical with**A4**
Add Device
Familiarize yourself with the product before setting it up. Refer to the product operating instructions for further information.

Connect your mobile device to a Wi-Fi network.
Add a device by selecting Add Device or the**+** icon.
Select Video Surveillance → Smart Camera.
Follow the on-screen instructions to complete the setup process.

Tick the circle to proceed to the next steps.

Overview

**B1**Current year/month/day/time
**B2**Image quality: Low (SD) / High (HD)
**B3**Sound On/Off
**B4**Microphone On/Off
**B5**Playback recorded video
**B6**Settings
**B7**Live image view
**B8**Full-screen view
**B9**Video
**B10**Capture image
Settings
Change Device Name

From the “overview” screen select … > Smart IP Camera.
Enter a new device name.

Low Battery Alarm
Set an alert for when the camera battery level drops to a set percentage.

From the “overview” select … > Power Management Settings > Set the low battery alarm threshold.
Choose a percentage to trigger the alert.

Flip Screen
If you have mounted your camera upside down, you can flip the screen.

From the “overview” select … > Basic Function Settings > Flip Screen.

Offline Notification
Receive a notification if your device goes offline.
From the “overview” select … > Offline Notification > toggle on/off.
Talk Mode
You can select a communication method “OneWay” or “Two-Way”
From the “overview” select … > Basic
Function Settings > Talk Mode.
Motion Detection Settings

From the “Overview” select … > PIR.
Adjust settings as needed.

Device Sharing
To share access to a device e.g. with a family member:

From the “Overview” screen select … > Share Device.
Follow the onscreen instructions.

Add a Shortcut to Your Mobile Device

From the “overview” screen select > Add to Home Screen.
Follow the on-screen instructions.

Remove Device

If someone steals your camera, they will not be able to use it.
The camera must be “removed” before it can be used under a new account that you have not “shared” with. You may need to do this if you are giving the camera away to a third party.

From the “Overview” screen select … > Device Management.
Select a device(s) then select Remove Device.

View Notifications
To receive notifications on your mobile device, notifications should be enabled through the app and in your mobile device notification settings.

From the “Home Page” view select Me > Settings > App Notification.
Set your notification settings as required.

FAQ

Find a list of frequently asked questions here:
From the “Overview” select … > FAQ & Feedback..

Troubleshooting

The app cannot connect to the device This may be due to a weak Wi-Fi signal or an interrupted connection.

Check that your internet connection is working correctly. Check cables, routers, and connections. Restart network devices if necessary.
Check that the device is within range of your Wi-Fi access point. Use of other 2.4 GHz products e.g. wireless networks and microwave ovens may cause interference.
You may need to set up a wireless repeater to improve the connection.
If the device is battery powered, it may need to have the batteries replaced.

Resetting the device
Resetting a device may help resolve erratic behavior such as connection problems.

Insert the included reset pin into the reset hole.
Press down until you feel a “click” then hold 4-5 seconds until you hear an audio prompt.
If needed, repeat steps to “Add device”.