xoopar XP81033 Meetair Conference Speaker User Manual

June 6, 2024
xoopar

XP81033 Meetair Conference Speaker
User Manual

Specification & appearance are subject to change without notice.
All trademarks and registered trademarks are the property of their respective owners© Xoopar Ltd.
Please refer to www.xoopar.com/im for more information up to date.
Eco-responsible product Anti-material RPET 8 natural cork housing. Anti-Noise Cancelling function. Dual built-in microphones to support 4-6 people meeting
Hidden cable management is excellent for conferences in a clear working space .

Specifications:

Transmission Distance: Up to 10 m
Wireless Connection. BT 5.0
Speaker Output Power: 5W
Play Time: up to 6 hours
Built-in Battery: Li-ion Battery/ 2000mAh
Battery Recharge USB or Type C adapter
Case Material: Bio-degradable Plastic/Matt +Cork + RPET
Patented Product

Overview

xoopar XP81033 Meetair Conference Speaker - overview

  1. USB A
  2. Type C
  3. Mic Mute
  4. LED
  5. Adjust volume
  6. ON/OFF

Power ON/OFF

xoopar XP81033 Meetair Conference Speaker - power

Recharge

xoopar XP81033 Meetair Conference Speaker - recharge

Connection

( Dual built-in microphones to support 4-6 people meeting. )

xoopar XP81033 Meetair Conference Speaker - connection

IMPORTANT SAFETY INSTRUCTIONS

WARNING When using this product, basic precautions should always be followed, including the following:
a. Read all the instructions before using the product
b. To reduce the risk of injury, close supervision is necessary when the product is used near children.
c. Do not put fingers or hands into the product.
d. Do not expose the product to rain or snow.
e. Using the product incorrectly may result in the risk of fire or injury to persons.
f. Do not use the product in excess of its output rating. Overload outputs above rating may result in a risk of fire or injury to persons
g. Do not use the product that is damaged or modified. Damaged or modified products may exhibit unpredictable behavior resulting in fire, explosion and/or risk of injury.
h. Do not disassemble the product. Take it to a qualified service person when services or repair is required. Incorrect reassembly may result in a risk of fire or injury to persons
i. Do not expose the product to fire excessive temperature. Exposure to fire or temperature above 100C may cause an explosion. The temperature of 100C can be replaced by the temperature of 2120F,
j. Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
k. Switch off the product when not in use

Caution and Safety

Do not expose to moisture, sunlight, or other heat sources.
Keep away from children and ensure all adults who use this product read and follow these instructions and warnings.
Operating temperature range between 32F and 113°F.
Use correct voltage charger, SVonly.
The battery must be recycled or disposed of properly.

CAUTION: Risk of Fire and Burns. Do Not Open, Crush, Heat Above 45°C/ 113°F or Incinerate. Follow Manufacturer’s Instructions.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 1 S of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. The user is encouraged to try to correct the interference by one or more of the following measures

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet the general RF exposure requirement The device can be used in portable exposure conditions without restriction

Made in China
www.xoopar.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals