ResMed AirFit P10 CPAP Nasal Pillows Mask User Guide
- June 6, 2024
- ResMed
Table of Contents
ResMed AirFit P10 CPAP Nasal Pillows Mask User Guide
How to use
-
Hold the pillows at your nose, ensuring the ResMed logo is at the top. Pull the headgear over your head.
-
Headgear should sit midway between the ears and eyes.
-
Adjust the top strap first.
-
Pull the strap through the buckle one notch at a time.
-
Do not overtighten.
-
Adjust the back strap to fine-tune the fitting if necessary.
-
Do not overtighten.
-
The back strap can be positioned over or under the hair.
-
Swift FX for Her pillows are designed to provide a natural fit.
-
Check that the pillows are upright at the entrance to the nose.
-
Connect free end of the short tube assembly to the device air tubing.
-
Swift FX for Her is now fitted and ready for use.
Optional Soft Wraps
- Wrap each of the soft wraps around either side of the headgear, folding the top fastener over the lower one.
- The soft wraps should be positioned on your cheeks, with the fasteners on the outside.
Note: For additional information, refer to the Swift FX for Her Nasal Pillows System User Guide.
ResMed Pty Ltd
1 Elizabeth Macarthur Drive
Bella Vista NSW 2153 Australia
Distributed by: ResMed Corp 9001 Spectrum Center Boulevard San Diego CA 92123 USA. ResMed (UK) Ltd 96 Milton Park Abingdon Oxfordshire OX14 4RY UK. See www.resmed.com for other ResMed locations worldwide. Swift is a trademark of ResMed Pty Ltd and is registered in U.S. Patent and Trademark Office. © 2012 ResMed. Specifications may change without notice. 1015225/1 2012-01.
Global leaders in sleep and respiratory medicine www.resmed.com