BURG WACHTER SA 1280 Ground Anchor Instruction Manual
- June 6, 2024
- BURG WACHTER
Table of Contents
BURG WACHTER SA 1280 Ground Anchor
Installation Instructions
- Using the anchor plate as a template drill 2 pilot holes using a 10mm 0 drill bit.
- Remove plate and re-drill the two holes with a 16mm 0 concrete bit to a depth of 85 – 90mm.
- Remove the threaded bolts from the two anchor fixings. Place the bolts through the holes in the anchor plate and hand tighten into the anchor fixings.
- Insert the two anchor fixings into the prepared holes.
- Holding the plate firmly against the wall or floor tighten the bolts, using a hexagonal head tool.
- Once fitted and checked the two steel balls can be hammered into the heads of the bolts. This makes it resistant to attack and unbolting.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>