iHOME IH-BW9XX Spectra Smart Color Light Bulbs User Guide
- June 6, 2024
- iHome
Table of Contents
iHOME IH-BW9XX Spectra Smart Color Light Bulbs
Thank you for purchasing your iHome smart home product, powered by Geeni.
Get started using your new devices by downloading Geeni, one convenient app that manages everything straight from your phone or tablet. Easily connect to your home Wi-Fi, and control multiple devices from the touch of your fingertips.
START GUIDE
What’s in the Box
STEP 1
Download the Geeni App from App Store or Google Play.
Register an account on your Geeni App.
- Enter your mobile phone number or email address
- Enter the verification code and create a password.
- Log in to the App.
STEP 2
Plug In
Screw in the bulb and turn on the power. The bulb should be quickly flashing 2x per second.
STEP 3
Add device: Auto Discover Device
Your device is now able to be discovered magically to connect to your home Wi-
Fi network. It’s quicker and easier than ever to connect.
Make sure:
While the device is flashing, press in the Geeni app.
The Geeni app will automatically detect your device using its wireless Bluetooth connection. Tap “Add Now”.
The Geeni app will automatically detect the network that your smartphone is connected to. Enter the password to your Wi-Fi network, then tap “Next Step” and the device will connect.
The Geeni app will try to connect your device.
NOTE: Geeni can’t connect to 5GHz networks. If the connection fails, try
to connect using AP Mode.
STEP 3
Add device: Easy Mode
In the Geeni app, on the top corner of the Devices screen, click Choose “Smart
Lighting”.
Make sure the bulb
is flashing quickly, indicating it’s ready to connect. If not, turn the bulb
off and on 3 times until it is flashing, then press “Next Step.”
Enter your Wi-Fi network and password.
The Geeni app will try to connect your device.
NOTE: Geeni can’t connect to 5GHz networks. If the connection fails, try
to connect using AP Mode.
Add device: Backup AP Mode
Make sure the device is in AP Mode, blinking slowly *see reset instructions
In the Geeni app, on the top corner of the Devices screen, click Choose “Smart Lighting” Choose “AP Mode” in the top corner.
Click Next and enter your Wi-Fi details.
Follow the instructions to choose the device from your Wi-Fi list.
The device will connect.
NOTE: Geeni can’t connect to 5GHz networks.
How do I reset the device and what does the blinking light mean?
Reset the bulb by turning it off and on three times.
- Reset once (off and on 3 times) to reach Easy Mode, which is the primary way the app will try to connect. (When in Easy Mode, you’ll see the bulb flashing quickly, 2x per second)
- Reset again (off and on 3 times) to reach AP Mode, which is the Backup Mode to help connect. (When in AP Mode, you’ll see the bulb blinking slowly, every 3 seconds)
Frequently Asked Questions
Can I share with family and friends?
Yes, you can share your bulbs with family and friends who will have access to
control your bulbs, plugs, cameras, and other iHome devices. In the Geeni app,
press the Profile button and click on the “Device Sharing” button, and you
will be able to give or revoke sharing permissions. In order to share, the
other user should already have downloaded the Geeni app and registered a new
account.
Can I group multiple iHome devices together?
Yes, you can group multiple devices of the same type together, by room,
location, or however else you want. The same devices can be in multiple
groups. (For example, create a group for “Bedroom” and another group for
“Entire House”, and your Bedroom lights can be included in both groups). From
your main device list, click on one of the devices you want to group. Press
the “•••” button on the top right for advanced settings, and click Create
Group. You’ll then be able to choose which devices you’d like to group
together and will be able to rename them.
How Many Devices Can I Control?
Geeni app can control an unlimited amount of devices in an unlimited amount of
locations. Your router may have a limit of how many devices can be connected
to one router. My iHome device has a funny name. How do I rename it?From your
main device list, click on one of the devices you want to rename, press the
“•••” button on the top right for advanced settings, and click Modify Device
Name (or Modify Group Name, if applicable). You’ll then be able to choose a
more familiar name. The bulb appears offline or unreachable, what should I
do?Check the light switch and make sure that it’s switched ON. The light bulb
requires an “always-on” power supply to operate properly. Make sure your Wi-Fi
router is online and in range. Make sure you have the latest Geeni
functionality by clicking “Check for firmware update” in your device settings.
What’s the Wireless Range?
The range of your home Wi-Fi is heavily dependent on your home router and the
conditions of the room. Check with your router specifications for exact range
data.
If my Wi-Fi/Internet goes down, will Geeni still work?
iHome products need to be connected to Wi-Fi in order to use them remotely.
Troubleshooting
Cannot connect to your Wi-Fi network.
- Make sure you entered the correct Wi-Fi password during the Wi-Fi setup. Check whether there are any Internet connection problems. If the Wi-Fi signal is too weak, reset your Wi-Fi router and try again.
Reset the device
- Reset once (off and on 3 times) to reach Easy Mode, which is the primary way the app will try to connect. (When in Easy Mode, you’ll see the bulb flashing quickly, 2x per second)
- Reset again (off and on 3 times) to reach AP, which is the Backup Mode to help connect. (When in AP Mode, you’ll see the bulb blinking slowly, every 3 seconds)
System Requirements
- Mobile device running iOS® 9 or higher or Android™ 5.0 or higher
- Existing Wi-Fi Network
- Existing light socket (E26 shape)
Technical Specifications
- E26 base
- 120 V, 60 Hz
- Wi-Fi: IEEE 802.11N, 2.4GHz
- (not compatible with 5GHz Wi-Fi networks)
Important Information
Before installing or replacing a bulb, read and follow all precautions, including the following: CAUTION: SUITABLE FOR DAMP LOCATIONS. Do not install the device with wet hands or when standing on wet or damp surfaces. Suitable for use in operating environment between -20°C and 40°C (-4°F and 104°F). Not for use in totally enclosed luminaries. This device is not intended for use with emergency exit fixtures or emergency exit lights. Do not use with dimmers. Please make sure the voltage of the LED bulb is compatible with the main electricity of your country before connecting to a bulb holder. Ensure that the base of the bulb matches the bulb holder. This device uses a non- replaceable light source. When the light source reaches the end of its life cycle, the device should be replaced.
Support
If you encounter any issues, please contact us at support.mygeeni.com for
help. To explore our full selection of products, visit us at:
www.mygeeni.com
888-232-3143 Toll-free
© 2021 Merkury Innovations • 45 Broadway 3rd FL, New York NY 10006.
The illustrated product and specifications may differ slightly from those
supplied. iHome is a registered trademark of SDI Technologies Inc., used under
license. Geeni is a trademark of Merkury Innovations LLC. iPhone, Apple and
the Apple logo are trademarks of Apple Inc., registered in the U.S. and other
countries. App Store is a service mark of Apple Inc. Google, Google Play, and
related marks and logos are trademarks of Google LLC. iOS is a registered
trademark of Cisco in the U.S. and other countries and is used under license.
Amazon, Alexa and all related logos are trademarks of Amazon.com, Inc. or its
affiliates. All other trademarks and trade names are those of their respective
owners.
Made in China
To control your iHOME smart bulbs, plugs or surge protectors, just say “OK Google,“ or “Hey Google,“ and ask. Make sure your devices are already set up using the Geeni app.
Things you can say
- Open the Google Home app and go to Home Control in the menu.
- Tap the “+“ button.
- Choose “Geeni“ from the list of Home Control partners.
Authorize your account with Google Assistant using the username and password from your Geeni app.
Now your Google Home app and GEENI devices are linked!
You’re now able to say “Hey Google“ and control your GEENI devices.
- At any time, go into the “Home Control“ section of the Google Home app to set nicknames and rooms for your devices. You can rename your devices in the Geeni app, and Google Assistant will refer to them by the same name. So if you rename a smart bulb to “Living Room“ or a nickname like “Blossom,“ then Google Assistant will use that same name later on. You can always give it a nickname using the Google Home app as well. You can also assign bulbs to a specific room, like “Bedroom“ or “Kitchen.“ Google Assistant will be able to control devices by room.
Things you can say
- Open the Alexa app and go to Skills in the menu.
- Search for Geeni then tap Enable.
- Authorize your account with Smart Home Skills using the username and password from your Geeni app.
- Choose “Discover Devices.“ After a few seconds your GEENI devices will be displayed under Smart Home in the Alexa app.
- You can rename your devices in the Geeni app, and Alexa will refer to them by the same name. So if you rename a smart bulb to “Living Room“ or a nickname like “Blossom,“ then Alexa will use that same name later on. Alternatively, you can create an Alexa group, like “Bedroom“ or “Downstairs,“ and add the device to the group. Alexa will recognize the group name in the Alexa app, or the device name in the Geeni app. More information is available at: http://tinyurl.com/alexa-smart-home-groups