ADAMSON IS-Series IS7px Ultra Compact Point Source Cabinet User Manual
- June 6, 2024
- ADAMSON
Table of Contents
IS7px User Manual
Distribution Date: May 1st, 2021
Copyright 2021 by Adamson Systems Engineering Inc.; all rights reserved
This manual must be accessible to the person operating this product. As such,
the product owner must store it in a safe place and make it available upon
request to any operator.
The resale of this product must include a copy of this manual.
This manual can be downloaded from https://www.adamsonsystems.com/en/support
/downloads-directory/is-series/is7px
Safety & Warnings
Read these instructions, keep them available for reference. This manual can be
downloaded from
Heed all warnings and follow all instructions.
A qualified technician must be present during the installation and use of this
product. This product is capable of producing extremely high sound pressure
levels and should be used according to the specified local sound level
regulations and good judgment. Adamson Systems Engineering will not be liable
for damages caused by any possible misuse of this product.
Servicing is required when the loudspeaker has been damaged in any way, such
as when the loudspeaker has been dropped; or when for undetermined reasons the
loudspeaker does not operate normally. Inspect your products regularly for any
visual or functionality irregularities.
Protect the cabling from being walked on or pinched.
Read the appropriate IS-Series Rigging Manual before installing the product.
Pay attention to rigging instructions included in both Blueprint AVTM and the
IS-Series Rigging Manual.
Use only with the rigging frames/accessories specified by Adamson, or sold
with the loudspeaker system.
This speaker enclosure is capable of creating a strong magnetic field. Please
use caution around the enclosure with data storage devices such as hard
drives.
In an effort to continuously improve its products, Adamson releases updated
accompanying software, presets, and standards for its products. Adamson
reserves the right to change the specifications of its products and the
content of its documents with no prior notice.
IS7px Ultra-Compact Point Source
- The IS7px is an ultra-compact point source enclosure. It contains internal passive crossover, two symmetrically arrayed 7″ LF transducers and a 3″ HF compression driver mounted on an Adamson waveguide, available in two configurations; with dispersion patterns of either 70° x 40° (HxV) or 100° x 50° (HxV) each rotatable in increments of 90°.
- The operational frequency range of the IS7px is 80Hz to 18kHz. The use of proprietary technologies such as Advanced Cone Architecture allows high maximum SPL.
- The enclosure has an unobtrusive visual design that blends seamlessly into the surrounding space, is made of marine-grade birch plywood, and has steel rigging discs on the top, bottom, and on each side, to be used with a wide variety of rigging accessories. Without sacrificing low resonance to the composite material, the IS7px weighs only 15 kg / 33 lbs.
- The IS7px is intended to be used as either a standalone system or a fill enclosure in tandem with other IS-Series products.
- The IS7px is designed for use with Lab. gruppen’s D-Series line of installation amplifiers. The IS7px is designed to pair easily and coherently with IS-Series subwoofers.
Wiring
- The IS7px (967-0006, 967-0009, 967-5006, 967-5009) comes with 2x Neutrik SpeakonTM NL4 connections, wired in parallel.
- The IS7pbx (967-0007, 967-0010, 967-5007, 967-5010) comes with an external barrier strip.
- Pins 1+/- are connected to the internal passive crossover.
- Pins 2+/- are not connected.
Amplification
The IS7px is paired with Lab.Gruppen D-Series amplifiers.
Maximum quantities of the IS7px per amplifier model are shown below. For a
master list, please refer to the Adamson Amplification Chart, found on the
Adamson website. https://adamsonsystems.com/support/downloads-directory
/design-and-control/e-rack/283-amplification-chart-9/file
Presets
The Adamson Load Library (https://www.adamsonsystems.com/support
/downloads-directory/design-and-control/erack/245-adamson-load-
library-5-0-1/file) contains presets designed for a variety of IS7px
applications. Furthermore, there are presets designed to pair with either
Adamson subs, or Adamson Line Arrays. For a master list, please refer the
Adamson PLM & Lake Handbook, found on our website.
https://adamsonsystems.com/support/downloads-directory/design-and-
control/e-rack/205-adamson-plm-lakehandbook/file
Weatherized
IS-Series weatherized models add an additional layer of environmental and
corrosion protection to Adamson’s already durable cabinet design. Weatherized
enclosures are ideal for marine and coastal venues, outdoor stadiums, open-air
performance spaces, and other permanent outdoor installations.
IS-Series weatherized cabinets feature the following additional protective
features.
Corrosion resistance
Corrosion resistance extends the lifetime performance of your system in
outdoor venues where water, salt, and acidity can impact durability and
function.
All structural steel elements of Adamson weatherized cabinets including
rigging and rigging links are made of a high yield strength stainless steel
alloy that offers 100% corrosion resistance.
Cabinet hardware is made of non-plated stainless steel, designed to provide
exceptional rust and corrosion resistance, particularly in high-saline
environments.
Environmental sealing
Additional protection of the cabinet helps ensure that loudspeaker performance
isn’t impeded by the harsh environments in which your system is deployed.
To guard against water and particle intrusion, the same two-part polyurea
coating that gives Adamson cabinets their life-extending exterior protection
is applied to the interior of the enclosure, creating a complete seal.
Weatherized models feature an exterior coating with a distinctively smooth
finish that allows for easy cleaning and removal of contaminants like dirt,
grime, saltwater, or sand.
To protect against dust and other particles, a fine stainless steel mesh has
been added to all points of entry including behind the front grille screens.
Cabling for the IS-Series weatherized cabinets is pre-wired and protected
inside a gasket-sealed jack plate, with gland nuts in place to seal the
connection points.
Technical Specifications
Frequency Range (- 6dB) | 80 Hz – 18 kHz |
---|---|
Nominal Directivity (-6 dB) H x V | 70° x 40° or 100° x 50° – Rotatable |
Maximum Peak SPL | 135 |
Components LF | 2x ND7-LM16 7” Neodymium Driver |
Components HF | NH3-8 3” Diaphragm / 1.4” Exit Compression Driver |
Nominal Impedance Passive | 6 Ω |
Power Handling (AES / Peak) Passive | 500 / 2000 W |
Rigging | Integrated Rigging System |
Connection | 2x Speakon™ NL4 or Barrier Strips |
Height (mm / in) | 527 / 20.75 |
Width Front (mm / in) | 251.5 / 9.9 |
Width Rear (mm / in) | 170 / 6.7 |
Depth (mm / in) | 356 / 14 |
Weight (kg / lbs) | 15.5 / 34.2 |
Colour | Black & White (Standard), RAL Colours (On-Demand) |
Processing | Lake |
EU Declaration of Conformity
Adamson Systems Engineering declares that the products stated below are in
conformance with the relevant fundamental health and safety criteria of the
applicable EC Directive(s), in particular:
Directive 2014/35/EU: Low Voltage Directive
IS7px – 70 x 40 – 967-0006, 967-0007, 967-0015,
967-5006, 967-5007, 967-5015
IS7px – 100 x 50 – 967-0009, 967-0010, 967-0016,
967-5009, 967-5010, 967-5016
Directive 2006/42/EC: Machinery Directive
IS7p & IS10p Fill Plate – 930-0031, 930-5031
IS7p Short Fill Plate – 930-0032
IS7p Horizontal Bracket – 934-0027, 934-5027
IS7p Vertical Bracket – 934-0028, 934-5028
IS-Series Sight Mount – 934-0026, 934-5026
Bracket C-Clamp – 932-0006, 932-5006
IS-Series Pole Mount Adapter – 932-0039
IS-Series C-Clamp – 932-0040
IS-Series Point H-Clamp – 932-0041
IS-Series Tilt Adapter – 932-0042
IS-Series Sight Mount LInk – 932-0044
IS-Series Super Sight Mount – 934-0031
IS-Series Articulator – 934-0032, 934-5032
Signed at Port Perry, ON. CA – May 1st, 2021
Brock Adamson (President & CEO)
ADAMSON SYSTEMS ENGINEERING, Inc.
1401 Scugog Line 6, Port Perry (ON), L9L 1B2, Ontario, Canada
T: +1 905 982 0520, F: +1 905 982 0609
Email: info@adamsonsystems.com
Website: www.adamsonsystems.com