Springbar Skyliner Canvas Hot Tent Instruction Manual

Springbar Skyliner Canvas Hot Tent

Product Specifications:

• Size: 10 x 14 x 6.8
• Weight: 97 lbs.
• Packed Dimensions: (Tent Bag) 26 x 32, (Pole Bag) 8 x 62
• Material: Laminated Vinyl Floor, Aluminum Alloy Pole Set with Steel Reinforcements, No-See-Um Mesh Window and Door Interiors, USA-Made Steel Wedge Stakes, Heavy-duty Canvas Bucket Bag

Product Usage Instructions

Springbar Tent Set-Up Guide:

1. Stake it Down: Select a level site and keep the tent as square as possible. Springbar Tents MUST BE SECURELY STAKED DOWN to function.
2. Insert Ridge Poles and Tension Rods:
   • Use ridge poles (three pieces), 1 aluminum sleeve, and 4 tension bars.
   • Place the ridge poles end to end and press down to tension the roof.
   • Slide the aluminum sleeve over the connection point to secure the ridge.
   • Tip: The tension screw may be adjusted to achieve more or less tension as needed.
3. Install Second Upright Pole:
   • Tip: Follow the same procedure outlined in Step 4.
4. Install One Upright Pole:
   • Tip: Assemble the upright pole on the shortest setting. After installing, lengthen the pole until the walls are taut–but not too tight.
5. Enjoy your Skyliner: Cut and sewn by hand in Salt Lake City, Utah, USA.

Frequently Asked Questions

• Q: What is included in the Skyliner package?
  • A: The Skyliner package includes a Carry Bag, Pole Bag, Stove Jack Insert, Fair Weather Mesh Window, Mesh Skyloft, Reversible Organizers, 20oz Canvas Bucket Bag with Steel Wedge Stakes, Tension Rope with Tie Guy, Velcro Straps, Upright Poles (2-piece Construction), Awning Poles (4-piece Construction), Ridge Pole (3-piece Construction), Tension Rods, and Aluminum Sleeve Pole.
• Q: Where is the Skyliner manufactured?
  • A: The Skyliner is cut and sewn by hand in Salt Lake City, Utah, USA.
• Q: How should I adjust the tension of the tent?
  • A: You can adjust the tension of the tent by using the tension screw on the ridge poles to achieve the desired level of tension. Ensure the walls are taut but not overly tight for optimal performance.

SPECS

• size
  • 10ʼ x 14ʼ x 6.8ʼ
• weight
  • 97 lbs
• packed dimensions
  • (Tent Bag) 26” x 32” (Pole Bag) 8” x 62”

material

Sunforger® marine-finish boat shrunk army duck canvas. 100% cotton, double- fill construction. Finished in Georgia, USA—the ʻgold standardʼ in cotton tent canvas. Watertight, breathable, and highly durable. Laminated Vinyl Floor. Heavy-duty and fully waterproof. Aluminum alloy pole set w/ steel reinforcements. No-See-Um Mesh window and door interiors. USA-Made Steel Wedge Stakes and heavy-duty canvas bucket bag.

spring bar tent set-up guide

1. Stake it Down.
   Select a level site and keep the tent as ʻsquareʼ as possible. Springbar Tents MUST BE SECURELY STAKED DOWN to function.

2. Insert Ridge Poles and Tension Rods.
   Use ridge poles (three-piece), 1 aluminum sleeve, and 4 tension bars

3. Tension the Roof Panel.
   Assemble the three-piece ridge pole – two pieces will nest together creating a longer section of the ridge pole. Then place the ridge poles end to end and press down to tension the roof. Slide the aluminum sleeve over the connection point to secure the ridge.
   Tip: The tension screw may be adjusted to achieve more or less tension as needed.

4. Install One Upright Pole.
   Tip: Assemble the upright pole on the shortest setting. After installing, lengthen the pole until the walls are taut—but not too tight.

5. Install Second Upright Pole.
   Tip: Follow the same procedure outlined in Step 4.

6. Enjoy your Skyliner.

Skyliner includes

“discover a new pleasure in camping”

• Jack Kirkham Sr. circa 1962
• Inventor of the Springbar® Tent

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>