ADAMSON Network Distribution System User Manual
- June 4, 2024
- ADAMSON
Table of Contents
NETWORK
DISTRIBUTION
SYSTEM
User Manual
Distribution Date: June 7, 2022
Network Distribution System – User Manual
NDS
User Manual
Distribution Date: May 10th, 2021
Copyright © 2021 by Adamson Systems Engineering Inc.; all rights reserved.
This manual must be accessible to the person operating this product. As such,
the product owner must store it in a safe place and make it available upon
request to any operator.
Resale of this product must include a copy of this manual. This manual can be
downloaded from https://adamsonsystems.com/en/support/downloads-directory
Symbols
This symbol alerts the user that there are important operating and maintenance
instructions in the literature accompanying this appliance
This symbol alerts the user to the presence of voltages that can cause
dangerous electric shock
This symbol alerts the user to the weight of the appliance that can cause
muscle strain or back injury
**** This symbol alerts the user that the appliance can be hot to the touch
and should not be touched without taking care and instruction
Safety & Warnings
Read these instructions and keep them available for future reference.
-
This manual can be downloaded from: https://adamsonsystems.com/en/support/downloads-directory
Heed all warnings and follow all instructions. -
Clean this product with a dry cloth only.
-
Never restrict the ventilation ports.
-
Protect the cabling from being walked on or pinched.
-
Only use attachments and/or accessories specified by Adamson Systems Engineering.
-
A qualified technician must be present during the installation and use of this product. Adamson Systems Engineering will not be liable for damages caused by any possible misuse of this product.
-
Inspect the product before each use. If any sign of defect or damage is detected, immediately withdraw the product from use for maintenance.
-
Refer all servicing of this product to qualified service personnel.
-
Do not open the unit. There are no user-serviceable parts inside this product. Failure to comply voids the warranty.
-
Do not install this product in wet or humid locations.
-
**** Do not install this product near heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
Product Overview
Dimensions
Specifications
- The Network Distribution System (NDS) serves as the central patch bay for signal distribution to CS-Series loudspeakers and other rack-mounted equipment, by packaging multiple digital and analog signals.
- OpticalCON™ and etherCON™ connections on the front panel take input from the primary and secondary LAN. These individual LANs are then combined into a single cable carrying redundant networked audio to the loudspeaker system.
- Two analog signals can be distributed by the NDS via XLR connectors on the front panel. Each analog signal is split to three XLR connectors.
- The rear panel of the NDS includes LC2 Fiber Optic and etherCON™ connections for sending primary and secondary LAN to two AVB-enabled switches, as well as six primaries and six secondary etherCON™ connections for AVB network returns from the switches.
- The NDSis a passive cabling patch bay. For full functionality two external AVB Milan enabled switch- es are necessary.
Network Redundancy
Combined Network Speaker Outputs
Splitting the 1 Gbit/s network into two 100 Mbit/s creates a primary and
secondary network. Both networks are combined on the NDS speaker outputs. Each
network connector on CS-Series cabinets is using two 100 Mbit/s switch ports
processing the received data, allowing for full redundancy on a single cable.
ADAMSON SYSTEMS ENGINEERING, Inc.
1401 Scugog Line 6, Port Perry
Ontario, Canada L9L 1B2
T: +1 905 982 0520, F: +1 905 982 0609
Email: info@adamsonsystems.com
Website: www.adamsonsystems.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>