hansgrohe 27373000 Raindance E Shower Head with Arm Instruction Manual
- June 12, 2024
- hansgrohe
Table of Contents
hansgrohe 27373000 Raindance E Shower Head with Arm
Product Information
The product is a shower system with the model name Raindance E 27373000. It
can be used for bathing, hygienic, and body cleansing purposes. The shower
system has a Quattro 4-Way Diverter Valve, a Trio 2-Way Diverter Valve with
integrated Shut-off valve, and a waste drain that must have a performance of
more than 50 l/min. The operating pressure is recommended to be 1 MPa or 10
bar or 147 PSI.
The shower system should not be used by children or adults with physical,
mental, and/or sensory impairments without proper supervision. The wall must
be reinforced in the installation area, and gloves should be worn during
installation to prevent crushing and cutting injuries.
Product Usage Instructions
- Step 1: Make sure to wear protective gloves during installation to prevent crushing and cutting injuries.
- Step 2: Reinforce the wall in the installation area.
- Step 3: Install the shut-off valve.
- Step 4: Install the Quattro 4-Way Diverter Valve or Trio 2-Way Diverter Valve with integrated Shut-off valve.
- Step 5: Plug the unused outlet.
- Step 6: Ensure that the waste drain performance is more than 50 l/min.
- Step 7: Connect the shower system to warm and cold water sources.
- Step 8: Do not allow the streams of the shower touch sensitive body parts (such as your eyes). Keep an adequate distance between the shower and you.
- Step 9: The arm of the shower head is intended only to hold the shower head. Do not load it down with other objects.
- Step 10: Clean the shower system regularly according to the instructions provided in page 39 of the manual.
Safety Notes
- Gloves should be worn during installation to prevent crushing and cutting injuries.
- The shower system may only be used for bathing, hygienic and body cleansing purposes.
- Children as well as adults with physical, mental and/or sensoric impairments must not use this shower system without proper supervision. Persons under the influence of alcohol or drugs are prohibited from using this shower system.
- Do not allow the streams of the shower touch sensitive body parts (such as your eyes). An adequate distance must be kept between the shower and you.
- The arm of the shower head is intended only to hold the shower head. Do not load it down with other objects!
Installation Instructions
- The fitting must be installed, flushed and tested after the valid norms!
- Where the contractor mounts the product, he should ensure that the entire area of the wall to which the mounting plate is to be fitted, is flat (no projecting joints or tiles sticking out), that the structure of the wall is suitable for the installation of the product and has no weak points. The enclosed screws and dowels are only suitable for concrete. For another wall constructions the manufacturer’s indications of the dowel manufacturer have to be taken into account.
- This mixer cannot be used in conjunction with hydraulically, electronically or thermally controlled instantaneous heaters.
Technical Data
- Operating pressure: max. 0,6 MPa
- Recommended operating pressure: 0,1 0,4 MPa (1 MPa = 10 bar = 147 PSI)
- Hot water temperature: max. 60°C
Center shower tub
Warm water
Cold water
Do not use silicone-containing acetic acid!
The wall must be reinforced in this area.
Shut off valve
Quattro 4-Way Diverter Valve
Quattro Trio
Trio 2-Way Diverter Valve with integrated Shut-off valve
Plug the unused outlet.
The waste drain performance must be more than 50 l/min.
Waste
Dimensions
Flow diagram
Spare parts
Cleaning
Assembly
Cleaning: Just clean: simply rub over the spray nozzles to remove lime scale.
Hansgrohe · Postfach 1145 · D-77761 Schiltach · Telefon +49 (0) 78 36/51-1282
· Telefax +49 (0) 7836/511440
E-Mail: info@hansgrohe.com · Internet:
www.hansgrohe.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>