SUNJOE SPX-SRL9 Pressure Washer Sky Lance User Manual

: June 6, 2024
: SUNJOE

SUNJOE SPX-SRL9 Pressure Washer Sky Lance

IMPORTANT!

Safety Instructions

All Users Must Read These Instructions Before Use

To reduce the risk of injury, the user must read and understand this operator’s manual as well as the operator’s manual for their pressure washer before using this product. Failure to follow all warnings and precautions may result in death, serious personal injury, or property damage.

A nozzle tip must be used with this pressure washersky lance. You may use the one included or any other standard pressure washer tip.
Keep at least 50 feet away from power lines. Do not touch or aim spray at electrical wiring of any kind.
Do not operate the sky lance, change nozzles or accessories while spraying or while the wand is under pressure. Turn off the pressure washer, shut off the water supply, point the nozzle in a safe direction, and pull the trigger to release water pressure before making any changes.
Do not use the sky lance while on a ladder or scaffolding.
When using the sky lance, make sure the high pressure hose is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress. Keep the hose clear of the working area.
Do not exceed the maximum pressure, volume, or temperature listed in the product specifications.
Do not remove or alter any warning labels included on the sky lance.
Before operation, make sure the working area is clear of obstructions or hazards.
Maintain proper balance and control of the sky lance at all times.
To minimize the risk of kickback, grip the sky lance firmly with both hands. A firm grip together with a stiff arm will help you maintain control of the sky lance if kickback occurs.

FEATURES

Hose handle rest
Hose handle rest lock button
Trigger gun
Trigger
Safety lock
Support bracket
Shoulder strap
Quick-Connect collar
120° gutter adapter
Quick-Connect tip
30° angled adapter
Hose adapter
. Soft grip
25° Quick-Connect nozzle tip
Top extension lance
Middle extension lance
End extension lance
High-pressure hose connection

Technical Data

ConnectionsM22 15 mm Male Inlet Quick-Connect Outlet Threaded Accessory Port
Compatible Pressure …………. 1800 PSI – 4000 PSI
Max Water Flow ………………… 6 GPM
Max Water Temperature …….. 140°F (60°C)
Shoulder Strap Length ………. 6.2 ft (1.9 m)
Length …………………………….. Partially Connected: 6 ft. (1.8 m) Fully Connected: 9 ft. (2.7 m)
Top Extension Lance …………. 35.4 in (90 cm)
Middle Extension Lance …….. 34.4 in (87.5 cm)
End Extension Lance …………. 38.4 in (97.5 cm)
Adapter ……………………………. M22 15 mm connection to M22 14 mm connection
Net Weight 6.4 lbs (2.9 kg)

Unpacking

Carton Contents

Trigger gun with top extension lance
Shoulder strap
120° gutter adapter
30° angled adapter
25° Quick-Connect nozzle tip
Middle extension lance
End extension lance
Hose adapter
Manual + registration card

Carefully remove the sky lance and check to see that all of the above items are supplied.
Inspect the product carefully to make sure no breakage or damage occurred during shipping. If you find damaged or missing parts, DO NOT return the unit to the store. Please call the Snow Joe® + Sun Joe® customer service center at1- 866-SNOWJOE (1-866-766-9563).

NOTE: Do not discard the shipping carton and packaging material until you are ready to use your new sky lance. The packaging is made of recyclable materials. Properly dispose of these materials in accordance with local regulations.

IMPORTANT! The equipment and packaging material are not toys. Do not let children play with plastic bags, foils, or small parts. These items can be swallowed and pose a suffocation risk!

Assembly

Connect the Lance

The sky lance can be used when partially connected or fully connected. Follow the instruction below to connect the extension lances.

The sky lance can be partially connected using only the top and the end extension lance. Insert the threaded end of the end extension lance into the opening of the top extension lance, and twist to secure (Fig. 1). A partially connected sky lance will provide a total of 6 ft (1.8 m) extension.
To fully connect the sky lance, insert the threaded end of the middle extension lance into the opening of the top extension lance and twist to secure (Fig. 2). Then connect the end extension lance to the middle extension lance and twist to secure (Fig. 3).
A fully connected sky lance will provide a total of 9 ft(2.7 m) extension.

WARNING!

Connect the lance only as much as necessary for the cleaning job. Remain in full control of the telescoping pole at all times. Loss of control of the sky lance could result in possible serious personal injury.

Connect the Nozzles/Adapters

NOTE: We’ve included one Quick-Connect nozzle to get you started but use any of your favorite Quick-Connect nozzle tips.The end extension lance is featured with a standard Quick-Connect collar that can be connected with nozzles and adapters. Follow the instructions below to use compatible nozzles or adapters. Snap the desired nozzle onto the Quick-Connect collar until it clicks into place (Fig. 4).

WARNING!

Do not make changes to the nozzle while the trigger is engaged. Doing so could result in damage to the pressure washer or injury to the user.The Quick- Connect collar can only be connected with nozzles or adapters that are also equipped with the standard Quick-Connect Tip, such as Sun Joe® Quick-Connect Spray Tip Set (SPX3000-TPS). Visit sunjoe.com or contact the Snow Joe® + Sun Joe® customer service center at 1-866-SNOWJOE (1-866-766-9563) to purchase this spray tip set.

Attach the Shoulder Strap

The sky lance comes with an adjustable shoulder strap. The shoulder strap should be installed and adjusted to a comfortable position before operating.

To attach the shoulder strap, attach the buckle of the shoulder strap to the support bracket as shown (Fig. 5).
To tighten the shoulder strap, pull down on the loose end of the strap .

Connect with Pressure Washer

Shut off the pressure washer and the water supply.
Engage the safety lock on the trigger gun by pushing up on the safety lock until it clicks into the slot (Fig. 6).
Press the hose handle rest lock button, and rotate the hose handle rest to expose the high-pressure hose connection (Fig. 7).
Connect a M22 15 mm pressure hose to the high-pressurehose connection, thread to secure (Fig. 9).
Connect the other end of the pressure hose to the wateroutlet of the pressure washer. Turn on the water supply and start the pressure washer.

Operation

WARNING! To reduce the risk of electrocution, possible serious personal injury or property damage, spray the pressure stream in a safe direction away from all electrical devices and bystanders. Ensure proper connection of all accessories before starting any cleaning project. Ensure compatibility and proper fit before using this sky lance. Wear eye protection with side shields. Risk of fluid injections; do not point at people, pets, electrical devices or the unit itself. Turn off the pressure washer before changing or adjusting accessories. For cold water use only. For outdoor use only – store indoors. Save these instructions. Refer to them frequently and use them to instruct other users. If you loan someone this tool, loan them these instructions also.
WARNING! The sky lance will flex as pressure is added or lost. Fully understand how the pole moves when adding or lessening pressure before attempting a cleaning project. If you are not completely comfortable with the movement of the pole under changing pressure conditions, do not use this product. Loss of control of the sky lance could result in possible serious personal injury.

General Operation

The trigger gun features a safety lock to prevent unintentional use. To lock, push up the safety lock until it clicks into place. To unlock, release the safety lock so it lies in its original position on the trigger (Fig. 11).
NOTE : Always engage the safety lock before moving or adjusting the sky lance
Before working on the cleaning project, test the sky lance in an area away from the project. Get a feeling of how the lance will move when the trigger is squeezed. Before starting, make sure the safety lock is down and in its original position (Fig. 11), hold the sky lance on the trigger gun and one soft grip, squeeze the trigger to start(Fig. 12).
NOTE: The gun will kick back when the trigger is squeezed and released. Before starting/releasing the trigger, move the nozzle about 10 feet away from the cleaning surface and stand stably.
Move to the project area, raise the pole and aim toward area to be cleaned. Squeeze the trigger to begin spraying.

Using the Attachments

The sky lance comes with two additional spray attachments: a 30° angled adapter and a 120° gutter adapter that can aim at hard-to-reach areas. Both attachments are featured with quick-connect tips that can be snapped directly on the Quick-Connect collar on the end extension lance. Follow the illustration below to assemble the attachments (Fig. 13).

NOTE: Other accessories are commercially available that can be used with this sky lance by fitting on the Quick-Connect collar. Follow all manufacturer’s instructions for the accessory being installed to assemble and use.
To order accessories for the Sun Joe® SPX-SRL9 pressure washer sky lance, please visit sunjoe.com or contact the Snow Joe® + Sun Joe® customer service center at1-866-SNOWJOE (1-866-766-9563).

Shutting Down

Turn off the pressure washer and disconnect it from power supply.
Turn off the water source.
Hold the trigger to release water pressure.
Disconnect the garden hose from the water inlet on the unit.
Disconnect the high-pressure hose connection on the trigger gun handle.
Release the trigger and engage the safety lock.

warning Turn off the water supply and squeeze the trigger to depressurize the unit. Failure to do so could result in personal injury due to discharge of high-pressure water.

Storage

Examine the sky lance thoroughly for worn, loose or damaged parts. Should you need to repair or replace a part, contact an authorized Snow Joe® + Sun Joe® dealer or call the Snow Joe® + Sun Joe® customer service center at 1-866-SNOWJOE (1-866-766-9563) for assistance.
Store the sky lance indoors in a clean, dry and locked location that cannot be reached by children.

Service + Support

If your Sun Joe® SPX-SRL9 pressure washer sky lance requires service or maintenance, please call the Snow Joe® + Sun Joe® customer service center at 1-866-SNOWJOE
(1-866-766-9563).

Model + Serial Numbers

When contacting the company, reordering parts, or arranging service from an authorized dealer, you will need to provide the model and serial numbers, which can be found on the decal located on the housing of the unit. Copy these numbers into the space provided below.

Optional Accessories

WARNING! ALWAYS use only authorized Snow Joe® + Sun Joe® replacement parts and accessories. NEVER use replacement parts or accessories that are not intended for use with this pressure washer sky lance. Contact Snow Joe® + Sun Joe® if you are unsure whether it is safe to use a particular replacement part or accessory with your pressure washer sky lance. The use of any other attachment or accessory can be dangerous and could cause injury or mechanical damage.

SUNJOE SPX-SRL9 Pressure Washer Sky Lance 13

Sun Joe’s complete line of premium pressure washer accessories and attachments make it easy to get your dirty work done, and also help you get the most out of your model!
SHOP ONLINE now at sunjoe.com

NOTE: Accessories are subject to change without any obligation on the part of Snow Joe® + Sun Joe® to provide notice of such changes. Accessories can be ordered online at sunjoe.com or via phone by contacting the Snow Joe® + Sun Joe® customer service center at 1-866-SNOWJOE (1-866-766-9563).

OUR WARRANTY:

Snow Joe warrants new, genuine, powered and non-powered Products to be free from defects in material or workmanship when used for ordinary household use for a period of two years from the date of purchase by the original, end-user purchaser when purchased from Snow Joe or from one of Snow Joe’s authorized sellers with proof of purchase. Because Snow Joe is unable to control the quality of its Products sold by unauthorized sellers, unless otherwise prohibited by law, this Warranty does not cover Products purchased from unauthorized sellers. If your Product does not work or there’s an issue with a specific part that is covered by the terms of this Warranty, Snow Joe will elect to either (1) send you a free replacement part, (2) replace the Product with a new or comparable product at no charge, or (3) repair the Product. How cool is that!
This Warranty gives you specific legal rights, and you may also have other rights which vary from State to State.

PRODUCT REGISTRATION:

Snow Joe strongly encourages you to register your Product. You can register online at snowjoe.com/register, or by printing and mailing in a registration card available online from our website, or calling our Customer Service Department at 1-866-SNOWJOE (1-866-766-9563), or by e-mailing us at help@snowjoe.com. Failure to register your Product will not diminish your warranty rights. However, registering your Product will allow Snow Joe to better serve you with any of your customer service needs.

WHO CAN SEEK LIMITED WARRANTY COVERAGE:

This Warranty is extended by Snow Joe to the original purchaser and original owner of the Product.

WHAT IS NOT COVERED?

This Warranty does not apply if the Product has been used commercially or for non-household or rental applications. This Warranty also does not apply if the Product was purchased from an unauthorized seller. This Warranty also does not cover cosmetic changes that do not affect performance. Wearing parts like belts, augers, chains and tines are not covered under this Warranty, and can be purchased at snowjoe.com or by calling 1-866-SNOWJOE (1-866-766-9563).