H Koenig NV60 Compact Steam Cleaner Instruction Manual

H Koenig NV60 Compact Steam Cleaner

Safety Instructions

Dangers of Injury

• This device may be used by people with reduced physical, sensory or mental abilities or a lack of experience and/or knowledge if they are supervised or have received instruction on how to use the device safely and understand the dangers resulting from this. Children must not play with the device.
• The device should only be used and stored out of the reach of children and animals. Improper use can lead to scalding and electric shock.
• Keep children and animals away from the packaging film. There is a danger of suffocation!
• Never aim steam directly at people, animals or plants. This can cause severe scalding.
• Only hold the device by the handle when you are operating it. There is a danger of scalding!
• Never leave the device unattended when it is connected to the mains.
• Shortly after use, the attachment used may still be very hot. You should therefore wait for a few minutes until it has completely cooled down before you detach it.
• Danger of scalding! Always allow the device to cool down completely before you pour water in or out, clean the device and/or store it away. Never attempt to open the water reservoir during use. Always make sure that the water reservoir is firmly shut before you use the device.
• Make sure that the connected mains cable does not present a trip hazard.
• This appliance may be used by children of at least 8 years of age, as long as they are supervised and have been given instructions about using the appliance safely and are fully aware of the danger involved.
• Cleaning and maintenance should not be carried out by children unless they are at least 8 years of age and are supervised by an adult.
• Keep the appliance and its power cord out of reach of children under 8 years of age.
• When using electrical equipment, safety precautions must always be taken to prevent the risk of fire, electric shock and/or injury in the event of misuse.
• Make sure that the voltage rating on the typeplate corresponds to your main voltage of your installation. If this is not the case, contact the dealer and do not connect the unit
• Please keep this document at hand and give it to the future owner in case of transfer of your device
• Never leave the unit unattended while in operation.
• The device must not be used if it has been dropped, it obvious signs of damage are visible or if it has leaks.

Danger of Fire

• Do not use the device in rooms containing easily ignitable dust or poisonous and explosive fumes.
• Do not insert anything into the openings of the device and make sure that these do not become clogged.

Danger of Electric Shock

• The device should only be connected to a properly installed plug socket with safety contacts. The plug socket must also be readily accessible after connection. The mains voltage must match the technical data of the device. Only use suitable extension cables whose technical data is the same as that of the device.
• This device must be earthed when connected. Use only the appropriate plug. Do not try to circumvent the earthing.
• Never immerse the device in water or other liquids! Ensure that the device, the cable or the plug do not fall into water or become wet. Should the device fall into water, switch off the power supply immediately. Only then should you remove it from the water.
• Never touch the device, the cable or the plug with wet hands to prevent electric shocks.
• The steam must not be aimed directly at electrical equipment, mains cables or parts containing electrical components (for example inside ovens, fridges, switches and lights, microwave ovens, screens).
• Pull out the mains plug after each use before you remove/change an attachment, top up/empty the water reservoir or clean the device. Always pull the plug and never the cable.
• Use the device only in closed rooms.
• Always check the device for damage before putting it into operation. Use the device only when it is completely assembled and operational. The device must not be used if it has been dropped, if obvious signs of damage are visible or if it has leaks.
• In the event of damage/faults, switch the device off immediately.
• Never try to repair the device, the mains cable or the mains plug yourself or replace parts. If defects occur, the device may no longer be used. Get in touch with the nearest customer service centre/specialist dealer or, in the event of damage, please contact our customer service department. Incorrect repairs may cause considerable risks to the user.
• The device must not be used if it has been dropped, it obvious signs of damage are visible or if it has leaks.
• The steam must not be aimed directly at electrical equipment, mains cables or parts containing electrical components (for example inside ovens, fridges, switches and lights, microwave ovens, screens).

Avoiding Damage to Material, Property and the Device

• Position the cable in such a way that it does not become squashed or bent and does not come into contact with hot surfaces.
• Only switch on the device when the water reservoir is filled with water as otherwise the water pump may be damaged and the useful service life of the device may be shortened.
• Do not place any heavy objects on the device, the cable or the plug.
• Do not pull or carry the device by the cable.
• Do not use any other accessories. Use only original manufacturer’s accessories.
• Never pour any cleaning agent or other chemical additives into the device. This could destroy the device and safe working is no longer guaranteed.
• Never cover up the steam outlet openings and do not stick any objects into them.
• Maintain a sufficient distance from heat sources such as hobs or ovens in order not to damage the device.
• Do not drop the device or allow it to be knocked violently.
• Do not expose the device or accessories to extreme temperatures, wide temperature fluctuations, open fire, direct sunlight, and do not expose the device housing to any moisture or wet conditions.
• Always try cleaning first at a small, inconspicuous spot.
• Never direct the steam at one spot for too long.
• Never use the device on cold glass surfaces (at temperatures of below 10°C). The hot steam could cause the glass to shatter.
• In the case of surfaces treated with wax, the heat and steam may remove the wax!
• Do not use any caustic or abrasive cleaning agents (e.g. vinegar) or cleaning pads to clean the device.
• Put the device back into its storage position only once it has completely cooled down and there is no more water in the water reservoir.
• Store the device in a dry, clean place that is not accessible to children and animals.

Important: Never overfill the tank, or otherwise the steam generation will be affected or too high steam pressure will be caused.

Explanation of symbols:
Please read these carefully and comply with them in order to prevent personal injury and damage to property.

Supplementary information
This device works with hot steam!
Intended Use

• The device is intended to be used exclusively for steam-cleaning water-resistant and heat-resistant surfaces, for example, bathroom fittings, mirrors, tiles, shower cubicles, and certain floor coverings. Ask a specialist whether your flooring is suitable for cleaning with the steam cleaner. Always test the cleaning at a small spot first.
• The device is not suitable for surfaces which are sensitive to heat or moisture, for example wallpaper, velvet, silk, glued objects, unsealed and/or waxed wooden surfaces, soft plastic, leather and cold glass (with outside temperatures of below 10°C).
• The device is not suitable for cleaning electronic equipment and fragile objects.
• The device is for personal use only and is not intended for commercial applications.
• Use the device only as described in the instructions. Any other use is deemed to be improper.
• The warranty does not cover faults caused by incorrect handling, damage, calcification or repair attempts.

This also applies to normal wear and tear

Technically leading

With exclusive patented technology, high-temperature and high­pressure steam is used for clearing away the dirts and stains on the floorboards, doors, windows and clothes. The machine also can be used for killing bacteria on surfaces, and removing dusts and bacteria, and it is an environment-friendly and sanitary product. Automatic control ofheating, able to generate steam continuously and continuous cleaning is easy. With pure high-pressure water steam used, no chemical agents are added, completely environment-friendly.

Higher Safety

Designed to prevent heating empty boiler. After the water in the boiler tank is heated and evaporated completely, the machine will automatically disconnect the power supply and thus prevent empty heating. With high-sensitivity thermostat, 135°C high-temperature steam is available, ensuring disinfection and sterilization. The safety valve has automatic pressure release fonction. When there is high steam pressure in the tank, the valve will automatically open and release the pressure. Supplied the power plug with earthing wire, so that the tank and heating dise can be grounded, in order to ensure safety in operation. An extended power cord with double insulation, can effectively insulate the cable from water and dust, and ensure safety.

Durable

The machine is designed to have aluminum alloy die casting boiler body with extra-thick inner wall, and can resist high pressure and has a long service life. Complete plastic shell is made from quality PP and PA with anti­corrosion and high strength.

Energy-saving

With integrated design of specially-made heating tubes and boiler body, overall heating is provided, high heating efficiency and energy-saving. Double-layer shell structure can effectively prevent heat loss, environment- friendly and energy-saving.

Easy to use

Switch on power supply, and the machine immediately starts heating process. When it heats to specified temperature, press the steam button, and steam will be sprayed out slowly. So the machine is easy to operate. With complete cleaning accessories supplied, the machine can be assembled and disassembled easily. It can be used to clean the doors, windows, floor boards and clothes, and this is applicable widely.

Description of Structuring Parts

1. Body
2. Short spray nozzle
3. Safety cap
4. Steam button
5. Handle
6. Power cord and plug
7. Power Indicator
8.  Funnel
9. Measuring cup
10. Bent spray nozzle
11. Spray cup with round brush
12. Long spray nozzle
13. General spray nozzle
14. Spray nozzle for door/window
15. Towel sleeve

Preparations Before Use Unpack the product

• Open the packing box
• Read the User Manual carefully and keep it in good condition
• Check the accessories and documents supplied with the machine

Technical Specification

• Steam cleaner NV60
• Power supply: 220V-240V / 50Hz / 900-1050W
• Maximum pressure: 4 bars
• Maximum tank capacity: 250mL

The appliance can be used anywhere: it cleans, degreases, disinfects completely without chemicals (above 100°). It is suitable for different surfaces and materials, floors, worktops, windows, clothes, garden tools, bicycles, cars. The appliance is also suitable for disinfecting refrigerators, baths, smelly clothes and killing dust mites in mattresses, pillows or carpets.

FUNCTIONS

Disinfection and sterilization:

install the long spray cup on the short spray nozzle and aim the spray cup at the position that needs disinfection, and then press down the steam button. High-temperature steam can kill bacteria.

Cleaning the clothes
Install the spray cup with a hairbrush on the short nozzle, and then mount the towel sleeve. Aim the spray cup at the hung clothes, and press down the steam button and move the hairbrush up and down as well as to the left and to the right at the same time. Then stains can be removed from the clothes.
Cleaning doors and windows
Install the spray cup with a hairbrush on the short spray nozzle, and then install the spray cup for door/window on it. Aim the spray cup at the door/window, and press down the steam button and move the hairbrush up and down as well as to the left and to the right at the same time. Then stains can be removed from the door/window.
Cleaning the floorboards
Install the long spray nozzle on the short spray nozzle or do not install it. Then install bent spray cup or round spray cup. Aim the spray cup at the floor board, and press down the steam button to Remove the dirt and stains in wall corners and on the floor.
Operating Instructions Operation Procedures

1. Unpack the product, check the accessories and documents supplied with the product and make sure that the product and accessories are not damaged.
2. Before use, please read the User Manual carefully. The steam cleaner is only for use in households.
3. First, place the steam cleaner on a level platform, unscrew the safety cap counterclockwise, and then install the funnel. As following chart:
4. Take 175ml clean water with the measuring cup, and add the water into the tank. (Max. capacity of the tank is 300ml. Do not overfill the tank and some space must be left in the tank). Re-install the safety cap and tighten it in position.
5. Check the power supply and socket, and confirm they comply with the requirements given in the User Manual. Then turn on the power supply.
6. About 4 minutes after the power suppl y is turned on, steam is ready. At this time lightly press the steam button and check whether steam is sprayed out of the nozzle. (Do not aim the spray nozzle at other Persans or abjects).
7. If there is steam sprayed out, please install suitable accessories according to your needs after you release the button.
8. Press down the steam button a gain in order to carry out the operations required by you.

INSTALLATION OF ACCESSORIES

1. Install the long spray cup
   Hold the pipe section of the long spray cup in your hand, align the arrow on the spray cup with the single-line mark on short spray nozzle on the machine body, and insert the spray cup in position. Rotate the spray cup in clockwise direction, and align the arrow on the spray cup with the double-line mark on short spray nozzle on the machine body, as shown in: Figure 1. Fix the spray cup on the machine body. To remove the long spray cup, please rota te the spray cup inversely (counterclockwise) as shown in Figure 2, and align the arrow on the spray cup with the single-line mark on the machine body. Then the long spray cup can be pulled out. 
   

2. Install spray cup with round brush or bent spray cup
   For direct installation on short spray nozzle, aim the spray cup with round brush or bent spray cup at the top of spray nozzle, as shown in Figure 3, and push the spray cup upwards until it is in position. As the short spray nozzle and spray cup are positioned in six directions, the angle and direction can be adjusted during the installation. Or, first install long spray cup and then the spray cup with round brush or bent spray cup.The spray cup with round brush or bent spray cup and long spray cup can be installed in the same procedures as the installation on short spray nozzle.
   

3. Installation of spray cup for door/window
   As shown in Figure 4 and Figure 5, install the two small hooks of the spray cup for door/window and then trigger the big hook of the spray cup for door/window, and push the spray cup for door/window up and clutch it onto the body of the general spray nozzle.
   

REFILL WATER DURING OPERATION

1. Unplug the power cord and disconnect the power supply.
2. Press down the steam button to release the pressure until no steam is injected out.
3. Slowly unscrew the safety cap but do not remove it, and residual steam will be discharged slowly until no steam cornes out. Then place the machine in a cool place to cool it down for about five minutes. Finally, completely remove the safety cap.
4. Use the funnel and measuring cup to refill a suitable quantity of cold or hot water into the tank.
5. Re-install the safety cap onto the machine body and tighten it in position.

AFTER THE MACHINE IS USED

1. After the cleaning machine is used, unplug the power cord and disconnect the power supply.
2. Press down the steam button to release the pressure until no steam is injected out.
3. Slowly unscrew the safety cap but do not remove it, and residual steam will be discharged slowly until no steam cornes out. Then place the machine in a cool place to cool it down for about five minutes. Finally, completely remove the safety cap.
4. Empty the residual water in the tank and clean the external surface with a piece of dry cloth.
5. At last, re-install the safety cap onto the machine body and tighten it in position.
   Notes: Re-install the safety cap onto the machine body and tighten it in position.

ENVIRONMENT

CAUTION:

Do not dispose of this product as it has with other household products. There is a separation of this waste product into communities, you will need to inform your local authorities about the places where you can return this product. In fact, electrical and electronic products contain hazardous substances that have harmful effects on the environment or human health and should be recycled. The symbol here indicates that electrical and electronic equipment should be chosen carefully, a wheeled waste container is marked with a cross. Adeva SAS / H.Koenig Europe – 8 rue Marc Seguin – 77290 Mitry Mory – France www.hkoenig.com – sav@hkoenig.com – contact@hkoenig.com – Tél: +33 1 64 67 00 05

References

• H.Koenig : Le spécialiste du petit électroménager

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>