trevi LTV 2014HE Digital Terrestrial TV Instruction Manual

: June 17, 2024
: Trevi

trevi LTV 2014HE Digital Terrestrial TV

trevi LTV 2014HE Digital Terrestrial TV

Safety Precautions

Storage

This product shall be kept far away from too high or two low temperatures.
This product shall be stored at -20°С-60°С and its working temperature shall be -5°С -40°С.
Do not use this product in wet environment, such as in a bathtub, wash basin, kitchen, sink or basement, swimming pool, etc.
Do not place TV in an environment with high humidity, dust or full of mist.
Do not drop or throw this product.
Avoid strong vibration of the machine to avoid the strong collision with other objects.
Do not squeeze or scratch the product with sharp objects.
The rear recess of the product and the opening in the shell are used for ventilation, at the same time, they are used to ensure the reliability of components and components and avoid overheating. Do not place the TV and power adapter in bed, on sofa, carpet or other similar surface to avoid blocking the radiator opening. Do not place the television and the power adapter near or on heater or heat sources unless it is equipped with a complete ventilation device; The television and power adapter are prohibited from being placed in an insert-type installation device.
When in use, make sure the TV is at least 3 inches (76 mm) away from walls or other objects.
Please use the specified type of power on the TV label. If you have questions about the type of power source that shall be used, please consult your dealer or local power supply department.
Make sure that the power plug and wire you are using can withstand the sumof the rated current of all the powered products.
Do not place the TV in a place where users can easily touch it.
All the notes and instructions in the guide shall be observed.
Do not overload the power plug or extend the power cord, otherwise it may cause fire or electric shock.
Do not fix the TV without authorization, because the cabinet is subject to high voltage or other hazards. Qualified service personnel shall be required to repair the TV.
Please unplug the power adapter from the socket and ask qualified service personnel for repair if:

Maintenance

Before cleaning, first, disconnect all the cables of this device.
Wipe the case, screen and keys with a soft cloth soaked with a small amount of mild detergent.
When cleaning the TV, do not use polishing cloths, disinfectants or any kind of fuel or chemical cleaners such as alcohol and gasoline, etc.

Attention！

To ensure your own safety and the safety of the people around you, do not watch TV or turn on the TV receiver.
It’s dangerous to watch a TV program or use a TV receiver when driving a car.

Special Instruction

Bright spots and dark spots may appear on the screen. This is normal and related to active matrix screens and is not a symptom of failure. Do not try to conduct technology maintenance yourself. If anything goes wrong, turn the TV receiver off and contact us or your dealer. The device contains a large number of small electronic components. Disassembly or modification may cause damage or breakdown to the device.

Accessories

User Guide
DC / AC Power Adapter
12V Automotive Adapter
Remote Control
Audio and Video Combination Cable
Antenna
Mounting Bracket

Open the package and check if all the accessories are complete.

Instruction for Keys and Interfaces

Side Panel

12V DC Power Input Port
Power Switch
Headphone Port
Audio-video Input Port
HDMI Input Port
External Antenna Port
USB Port
Micro SD Memory Card Slot

Control Keys on the Control Panel

LCD
Sound System
MODE Key:mode selector switch.
/C H-Key : Previous/next period/Channel.
/ CH+Key :previous/period/channel
OK/MENU key: Confirm/ Menu
Remote receiving window
/VOL-key: Fast backward / volume down button.
VOL +: Fast forward / volume up key.
Return/LCD/ key: Turn off the screen/exit menu

Instruction for Function Keys on Remote Control (Some machines are

different, prevail in kind)

The remote control has the best performance within 5 meters and with angel below60°。

Blank Key
No function available
Key
Turn on working mode/standby mode
MUTE Key
Turn on/off the sound output
INPUT Key
System working mode selector key：
press the key each time, the system operating mode is cycled in the following
order： DTV/ATV/AV/HDMI/USB/CARD。
Key
Fast forward Key。
Key
Fast backward Key。
Key
Previous
Key
Next
CH+ /CH- Key
CH+ ：Choose up channel
CH- ：Choose down channel Switch Channel。
Key
Play/pause Key
STOP/EXIT Key
Stop watching/recording TV programs from Menu
OK Key
Confirm the selected function in the “Settings” menu.
Direction Key
：Left Key , ：Right Key。
MENU Key
Turn on/off the menu
RETURN Key
Under TV mode, press this key to return to the recent channel you have watched.
A：TV/RADIO Key
Switch between TV and Radio mode
VOL+/- Key
Volume up/down key
Digital Key 0~9
Digital Key 0-9 is used for inputting channel number and editing all parameters
A：TEXT Key
Open the text
A：EPG Key
Enter the interactive menu
INFO Key
Look through the information about the current channel Switch to audio mode or available sound track
25-28
Operation key under TV TEXT MODE: Control Key under Editing Mode
RED Key
Operating according to the information on screen
A：GREEN Key
Operating according to the information on screen
A：BLUE Key
Operating according to the information on screen
A：YELLOW Key
Operating according to the information on screen
.FAV Key
Turn on/set the favorite channel
AUDIO Key
Turn on/off subtitles.
![Instruction for Function Keys on Remote Control (Some machines

are different, prevail in kind)](https://manuals.plus/wp- content/uploads/2024/02/trevi-LTV-2014HE-Digital-Terrestrial-TV-Instruction- Manual-11.png)

Connection with External Devices

Audio – Video input signal
Audio-Video Cable Access: Plug the audio-video plug into the audio-video input port and press the INPUT Key. At this point, the input of audio-video signal is complete and the AV symbol is displayed on the screen.
Connecting Headphones
To use headphones to listen to music, first volume down, and then insert the headset, adjustor the right volume. When using headphones, the volume shall not be too large, so as not to hurt the hearing.
Connecting the Signal Cable under HDMI Mode
Please set the TV to HDMI Mode, then connect the HDMI Cable
Connecting to AC Power Supply
Plug the AC adapters’ AC plug into the power supply (100-240 V, 50-60 Hz AC) socket and the AC adapter’s DC plug into the 12 VDC input port.
( 12 Volt Car Charger can be used for this device).
USB/SD CARD Play
Insert a USB / SD card into the device and select USB / SD format as the format of the image/ audio/ video card included in the card (memory capacity shall be 32G or less).

Select the Input Signal Source

A.Press“INPUT” key，the input signal source details appear
B.Press “ / **“ key，select the signal source，press ENTER Key to confirm the choice
C**.TV would switch to the mode that you choose

A.Press the Menu Key，to enter system setting menu for system setup。
B.Press direction Key，to choose sections
C.Press / ENTER Key to enter the submenu and choose the option in the menu
D.Choose the option and press the Enter Key to confirm and finish the system setup
E.Press MENU, return to the main menu
F.Press STOP/ EXIT Key, to exit the system setup mode.

Attention: If the option is gray, it means the item cannot be set in this mode, please select the options available.

PICTURE

Press MENU Key，the main menu appears，then press key to choose Picture Menu
Picture Menu: Personalized /Dynamic/Standard/Mild.
Color Temperature :Personal/cold/Normal/Warm.
Aspect Ratio :Auto/I6:9/4:3
Noise Reduction:Low/ Middle /High/Off.
Screen: Adjust PC picture position

SOUND MENU

Press MENU Key, the main menu appears，then press key to choose Sound Menu
Sound Mode: Standard/Music/Movie/Sports/Personal.
Balance: Adjust the volume of the left and right loudspeaker
Auto Volume: under this mode, the fast adjustment would switch to smooth adjustment
Surround Sound：SURROUND /OFF.

TIME MENU

Press MENU Key, the main menu appears, then press Key to choose Time Menu
Clock: Adjust the time part：Day Month/ Year/ Hour/ Minute.
Off Time: Setting 60s before off
On Time: Setting to turn off after some minutes (enter the sleeping mode)
Sleep timer:240/180/120/90/60/30/20/10
Choose Time zone

OPTION MENU

Press MENU Key, the main menu appears, then press Key to choose Option Menu.
OSD Language: select display OSD Language
Audio Language: setting the audio language
Subtitle Language: setting up the subtitle language
Restore Default：restore all default settings

LOCK MENU

Press MENU Key, the main menu appears, and then press / Key to select Lock Menu.
Before entering settings, please enter the default password (0000) to enter the set value.
Lock System: Enter the password to lock up the critical system settings, such as program searches.
Before restoring defaults, you shall enter the password and then make the system settings.
Cancel LOCK: Unlock.
Set Password.
Block Channel: Indicates the channel you want to lock.
Parental Guidance: Set the age level of the television program (Age 4-18).

CHANNEL
Search for TV Programs：

Select DTV / ATV mode.
Press MENU Key, selectAuto search / ATV Manual Search mode to find the
TV program.
Select Auto Search and select Search Type: DTV + ATV / DTV / ATV. Then select your country, press Enter to start auto search.
Press CH + / CH- Key after Auto Scan is completed to select the desired program.
- Channel Edit: Set DTV / ATV and channel information.
- Signal Information: Check information about the television signal.

USBF unction Operating Instruction

USB Mode (Multimedia).

Press “INPUT or USB” Key to display the input source list, then press Key to select the source, press ENTER Key to confirm and display the multimedia mode.
The color of the icon indicates if there is a TV USB DRIVER. Yellow: Yes; Gray: No.
Press Key to select the type of media (Photo/Music/Movie/Text) you want to play. Press ENTER to confirm, and press Key to move to the directory and select what you want to play.
Select C and press “ENTER” Key to enter the submenu.

PHOTO PLAY

Insert the USB DRIVER into the USB slot.
Press “ / ” Key, select the picture and press “ENTER” Key to enter the submenu.
Select C and press “ENTER” Key to enter the submenu.
Select a picture, press Key to display the picture, press Key to display the last image played, and press Key to display the next image to be played.
Press “STOP / EXIT” Key to exit.

MUSIC PLAY

Insert the USB DRIVER into the USB slot.
Press “ / ” Key, select MUSIC and press “ENTER” Key to enter the submenu.
Select C and press “ENTER” Key to enter the submenu.
Select music, press Key to display, press Key to display the last song played, and press Key to show the next song to be played.
Press “STOP / EXIT” Key to exit.

MOVIE PLAY

Insert the USB DRIVER into the USB slot.
Press “ / ” Key, select Movie and press “ENTER” Key to enter the submenu.
Select C and press “ENTER” Key to enter the submenu.
Select movie, press Key to display, press Key to display the last section played, and press Key to show the next section to be played.
Press “STOP / EXIT” Key to exit.

Common Troubleshooting

The following phenomenon does not mean that the display has problem. Please check the following items before asking for help from the maintenance department.

Phenomenon	Troubleshooting
No image or sound

Unauthorized power supply is in use.
The power switch, monitor or remote control is off.

No image on TV|

Check if the right channel has been chosen.
Still under the multimedia mode, please change to TV mode.

No sound|

Sound is off or the sound system is not properly set.

Blurry or unstable image|

Check is the antenna is correctly connected;
Ground signaling is too weak

Ghosting|

Nearby buildings or top places reflects signals.

Snowflake|

Car or train electromagnetic radiation;
High-voltage lines or neon lighting radiation.

No color|

Check if the color setting is correct.
Check if the color system setting is correct
Weak signal.
Check whether the color suppression mode is on or off.

Unable to play USB Memorizer|

Make sure the USB has been correctly open
Check USB DRIVER format

No sound when connected to other devices|

Check if the connection with other devices is correct
Check the input status of the corresponding devices

Remote control does not work|

Check if there is battery inserted;
Check the battery status；
To make the remote control align with the receive window

Information sheet:

Technical Specifications

Full support for South American analogue TV / digital television system—ISDBT.
Analog TV band range: 55.25-861.25 MHz (for all TV channels).
Input Frequency: UHF 177.14MHz-213.14MHz, UHF 474.14MHz-803.14MHz.
Modulation: QPSK / 16-QAM / 64-QAM / 256 QAM.
Decoding Standard:The decoding standard for HL is МРЕG1,2МР, the decoding standard for L5HD is МРЕG-4 SP & ASP, Divx13.11; 4.х; 6.х.
Image Format: JPEG, BMP, PMG.
Audio format: МРЗ, WMA.
Video Format: MKV, AVI, DIVX, XVID, MOV, VOB, FLV, 3GP, DAT, MPEG, MPG, MP4, TS, TRP.

Basic Specifications

Dis p lay: color TFT LCD
Screen Size: 14.1 Inches
Aspect Ratio: 16: 10.
14.1 Inches Resolution: 1280 (Horizontal) X S (RGB) X 800(Vertical)
Speaker: 2 x 2 Watts
Power: 12 V DC
Socket: Input Socket for External Antenna; Stereo Headphone Connecting Port;
Audio / video input port (AV); USB port
AC Power – AC Adapter
Power Consumption：About30W
Working Temperature：-5°Cto 40°C
Storage Temperature：-20°C to 60°C

Notice :

This manual is for reference only. The information in this manual is subject to change without notice. The right to clarify any unknown conditions, errors or omissionsis reserved by our company.
No part in this device can be repaired by user. It is forbidden to attempt to open the device housing to remodel the television receiver. Internal components at high voltage can be hazardous to health. Equipment maintenance and adjustment shall be carried out by specialists.
To avoid personal injury, the product shall be securely fastened to the floor / wall according to the installation instructions.
Do not drip or splash water on this device. Do not place any objects containing liquids such as vases on this device.
Do not place sources of ignition such as lighted candles on the device.
Do not expose this device to extreme heat, such as direct sunlight, flames, etc.

INFORMAZIONI AGLI UTENTI ai sensi del Decreto Legislativo N° 49 del 14 Marzo 2014 “Attuazione della Direttiva 2012/19/UE sui rifiuti di apparecchiature elettriche ed elettroniche (RAEE)” Il simbolo del cassonetto barrato riportato sull’apparecchiatura indica che il prodotto alla fine della propria vita utile deve essere raccolto separatamente dagli altri rifiuti. L’utente dovrà, pertanto, conferire l’apparecchiatura integra dei componenti essenziali giunta a fine vita agli idonei centri di raccolta differenziata dei rifiuti elettronici ed elettrotecnici, oppure riconsegnarla al rivenditore al momento dell’acquisto di nuova apparecchiatura di tipo equivalente, in ragione di uno a uno, oppure 1 a zero per le apparecchiature aventi lato maggiore inferiore a 25 cm. L’adeguata raccolta differenziata per l’avvio successivo dell’apparecchiatura dimessa al riciclaggio, al trattamento e allo smaltimento ambientale compatibile contribuisce ad evitare possibili effetti negativi sull’ambiente e sulla salute e favorisce il riciclo dei materiali di cui è composta l’apparecchiatura. Lo smaltimento abusivo del prodotto da parte dell’utente comporta l’applicazione delle sanzioni amministrative di cui al D.Lgs n. Decreto Legislativo N° 49 del 14 Marzo 2014.

TREVI persegue una politica di continua ricerca e sviluppo, pertanto i prodotti possono presentare caratteristiche diverse da quelle descritte.

CUSTOMER SUPPORT

EN If you will not find your language on the instruction manual, please go on our website www.trevi.it to find it
SIMPLIFIED EU DECLARATION OF CONFORMITY
Hereby TREVI Spa declares that the radio equipment type
LTV 2014 HE is in compliance with directive 2014 / 53 / EU.
The full text of the EU declaration of conformity is available at
the following internet address
https://www.trevi.it/dms/zidi/TREVI/DOCLTV2014HE.pdf

Symbols Logo