scs sentinel HCN0055 Weather Station with MeteoStation Probe User Manual
- June 9, 2024
- SCS sentinel
Table of Contents
scs sentinel HCN0055 Weather Station with MeteoStation Probe
SAFETY INSTRUCTIONS
This manual is an integral part of your product. These instructions are provided for your safety. Read this manual carefully before installing and keep it in a safe place for future reference. Select a suitable location. Make sure you can easily insert screws and wall plugs into the wall. The power supply must be installed in a dry place. Check the product is only used for its intended purpose.
DESCRIPTION
Content Dimensions
Product presentation
Transmitter
A1 : Wall mounting hole
A2: Battery compartment
A3: Channel selection
A4 : TX button
Receiver
B1 : Outdoor temperature
B2: MAX MIN Outdoor temperature B3: Outdoor humidity
B4: MAX MIN Outdoor humidity BS: Channel number
B6: RF symbol
B7: Channel circulation symbol BB: Outdoor low power index
B9: Weather forecast symbols
B10: Air pressure
B11 : Indoor low power index
B12: Indoor temperature
B13: MAX MIN Indoor temperature
B14: Indoor humidity
B15: MAX MIN Indoor humidity B16: RCC symbol
B17: Date
B1B: Time/Alarm
C1 : Wall mounting hole
C2: Buttons (details p.10)
C3: Battery cover
C4: Stand (fold out)
TURN ON
Inserting the batteries in the receiver
- For pairing your indoor station and your outdoor sensor, place both instruments at a distance of approximately 1.5 meter. (Avoid getting close to possible interference sources (electronic devices and radio installations)
- Remove the protective foil from the display of the receiver.
- Remove the batteries cover and insert 2 new batteries 1.5V AAA, polarity as illustrated, and close the battery compartment again.
- The device will alert you with a beep and all LCD segments will be displayed for a short moment.
Air pressure settings :
- The air pressure is blinking : press« + / °C / °F » to adjust the value. Press «BARD» to confirm and quit; if no button pressed, then after 20s it will exit setting automatically and go to RD search.
- C2- Inserting the batteries in the outdoor transmitter.
- Open the screwed battery compartment of the outdoor transmitter
- The slide switch for channel selection is at position 1 (default)
- Insert 2 new batteries 1.5V AAA, polarity as illustrated
- Close the battery compartment again.
Installation
Free field range : 60 m
100%: free-fied
80%: wood, glass
50-70% : cartongesso
20-50% : stone
< 10%: metal
Reception of the outdoor values
The reception of the outdoor transmitter is automatic. However if nothing happens after 3 minutes proceed as below: Press on the« CH » button at the station backside: (- -) appears on the display. Then press on the« TX» button of the outdoor transmitter. The device will alert you with a beep and the receiver receives the values from the outdoor transmitter.
Reception of the DCF frequency signal
Date and time can be set up automatically on the Frankfurt atomic clock. Just maintain the RCC button during 3 o 4 seconds until hearing 1 Beep.
The A16 dish icon flashes.
The DCF reception always takes place hourly between 2:00 and 5:00 o’clock in the morning. If the clock cannot detect the DCF-signal (for example due to disturbances, transmitting distance, etc.) the time can be set manually. See paragraph D.
STATION SETTINGS
-
Press on« MODE» to make flash the hours.
-
Thanks to the « +/°C/°F » and « – RCC » buttons, set up the hours.
-
Repeat the same process to adjust the minutes, the year, the month and the day.
-
Press one last time on« MODE» the language choice appears.
-
Scroll down the different languages :
FRE (French) – OUT (Dutch) – SPA (Spanish) – DA N (Danish) – GER (German) – ITA (Italian) – ENG (Anglia’s) The language choice is only for the day of the week, that you can make display in place of the seconds. -
Press on« MODE » to set up the clock format to 12 or 24 hours.
-
To see streamed the day of the week instead of the seconds, maintain the« +/°C/°F » button during 3 seconds.
-
11 no action is done during 20s, the station go out automatically from the Program Mode
Alarm trigger’s time settings
- Press the «MODE» button to enter ALA RM mode.
- Press the « +/°C/°F » buttons to switch on or off the alarm.
- Hold « MODE » button for 3 seconds to set up the trigger’s time wanted with the «+°C °F» and «RCC» buttons.
Weather display
The sensor has 5 different displays :
- The weather forecast relates to a range of 12 hours. and indicate only a general weather trend. The accuracy is about 70-75%.
- The forecast accuracy will increase with the elapsed time.
- If the measure values above the range, then temperature displays HH.H ,humidity displays HH%
- If the measure values below the range, then temperature displays LL.L, humidity displays LL%.
- To cancel the MIN and MAX, press on the« CLR/SNZ » button.
- In the normal ° °mode you can change between
- Press the «+/ C/ F» button.
RECOVERY
No indication atthe receiver| Ensure that the batteries polarity are correct
Change the batteries
---|---
No DCF reception| No installed sensor. Check the outdoor station batteries. Do
again an automatic research of the station as indicated in the manual. Choose
another place to install the sensor or the station. Reduce at most the
distance between the sensor and the station. Check for having no interference
sources.
Incorrect indication or low
power symbol display
| Change the batteries
TECHNICAL FEATURES
Indoor mesures range| Temperature -10 °C – + 60 °C (14 °F – 140 °F)
Humidity 20% – 95%
|
---|---|---
Outdoor mesures range| Temperature -40 °C – + 60 °C (-40 °F – 140 °F)
Humidity 1% – 99%
Precision
| Temperature+/- 1 °c (2 °F) between O 0c to 50 °c +/- 2 °c in the opposite case (4 °F)
Humidity+/- 5% between 30% et 70% +/- 8% in the opposite case
WARRANTY
The invoice will be required as proof of purchase date. Please keep it during the warranty period. @tlT1′ Carefully keep the barcode and the proof of purchase, that will be necessary to claim warranty. In accordance with current regulations.
WARNING
Unused equipment must not be disposed of with normal household waste. The
hazardous substances it may contain could be harmful to health and the
environment. Use the special collection services provided by your local
authorities.
Toutes les infos sur :
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>