Hongdian H9380S Industrial Android Computer User Guide
- June 5, 2024
- Hongdian
Table of Contents
Hongdian H9380S Industrial Android Computer
Product overview
The H 9380 S Android IPC industrial computer uses the Cortex microprocessor and the Android operating system design high reliability, high stability intelligent industrial control device. It provides operating environments such as Android 4.4.2 / 5.1 , and urban services and business networking applications APP can run directly in an industrial computer system to provide convenient interactive services for end users. The equipment supports wireless transmission function, rich peripheral interface and reliable security management system can be widely used in urban service and commercial terminal networking, such as intelligent logistics cabinet, self-service terminal, charging pile, intelligent sales, access control management, etc.
Equipment item|
Specification
---|---
CPU
|
FreescaleI . MX6D dual-core/I . MX6Q quad-core
Memory
|
DDR3 2 GB
Built-in storage
|
eMMC 8 GB ,scalable support 16 GB/32/ 64 GB EMMC
External storage
|
Support for TF card external storage, up to 64 GB storage
Network standard
| The network communication can be realized according to different modules
Operating system
|
Android 4.4.2 , scalable support for Android 5.1
Image video processing
|
2D/3D accelerator: OpenVG 1.1 for 2D ; OpenGL ES 2.0 for 3D
Video codec: H.264 HP, MPEG 4 ASP, MPEG 2 MP
Image processing: BMP, JPG, PNG, GIF
Power consumption
|
Power on +12V DC
Working power consumption
|
Average power consumption (with modules, without other peripherals) in idle state of the device is approximately 550 mA@ +
12V DC
Equipment item
|
Specification
---|---
|
Maximum normal operating power consumption of the device (with
modules, without other peripherals) approx . 2A@ + 12V DC
Operating temperature
|
-20℃ + 60 ℃
Storage temperature
|
-40℃ + 85 ℃
Shell
| No fan design to ensure cooling ; Solid shell, anti-drop design Dimensions: 170 149 27 mm
Standard interface
|
l One 100 megabytes RJ45 gateway
l Three DB9 ports, one for RS-232 and RS-485 reuse, default RS-232 ,RS-485 Optional
l One power interface
l One WiFi antenna interface
l Four USB 2.0 ports (4 USB ports with a maximum load of 1.6A in total)
l One OTG port（Reserve）
l One HDMI
l One 3.54 mm Speaker interface
l One TF card interface
l A custom button (can be the main APP launch Yu exit, maintenance mode, and so on)
l One power switch button
l One ground stud
Wifi
|
802.11 B/G/N WiFi module locations
Equipment item
|
Specification
---|---
Cloud management platform
|
Support
Other
|
NTP/RTC clock synchronization support
Structural dimensions and interface definitions
Structural dimension diagram
The structural dimensions are shown in Figure 3-1. The units corresponding to
the physical dimensions of the equipment are millimeters. 
Panel interface diagram
Standard version of the panel interface diagram
The standard version of the interface is shown in Figure 3-2-1,
3-2-2.
Figure 3-2-1 Front panel interface diagram 
Figure 3-2-2 Rear panel interface diagram
Table 3-1 Standard panel interface table
Sequence number|
Explain
| Sequence number|
Explain
---|---|---|---
①| Four pin power interface| ⑪| HDMI interface
④| USB interface| ⑫| Power switch button
⑤| Ground stud| ⑬| RS 232 Serial Port 2 (configurable as RS
| | | 485 serial port)（Reserve）
---|---|---|---
⑥| SPK interface| ⑭| Wifi antenna interface
⑦
| A custom button (can be used as the main APP startup space exit, maintenance mode, etc.)|
⑮
|
RS 232 serial port 3（Reserve）
⑧| USB OTG interface（Reserve）| ⑯| 100 megabytes gateway
⑩| TF card interface| ⑰| RS 232 serial port 4（Reserve）
Interface definition
External interface diagram
The DB9 serial port of the H 9380S IPC with the interface pins shown in Figure 3-3-1 below.
Figure 3-3-1 DB9 Interface Diagram
DB9 pin table
Pin sequence number|
Pin definition
|
Explain
|
Remark
---|---|---|---
Pin 1| ——| ——| ——
Pin 2| RS 232 _RX| RS 232 level| ttyO2 corresponds to RS 485 interface B
Pin 3| RS 232 _TX| RS 232 level| ttyO2 corresponds to RS 485 interface A
Pin 4| ——| ——| ——
Pin 5| GND| Signally| ——
Pin 6| ——| ——| ——
Pin 7| ——| ——| ——
Pin 8| ——| ——| ——
Pin 9| ——| ——| ——
Internal interface diagram
When using jumper cap connections to select an interface, be sure to wire as follows.
Figure 3-3-2Serialportreuse
Serial port multiplexing interface specification table
Pin sequence number|
Pin definition
|
Explain
|
Remark
---|---|---|---
PIN 2, PIN 6
|
RXD
|
Rx pin for DB9
|
PIN 4, PIN 8
|
TXD
|
TX pins for DB2 9
|
PIN 1| RS 485 _B| Connect PIN 1 and PIN 2, Unicom RS 485 B| Simultaneous
connection to select RS 485
PIN 3| RS 485 _A| Connect PIN 3 and PIN 4, Unicom RS 485 A
PIN 5| RS 232 _RX| Connect PIN 5 and PIN 6, Unicom RS 232 receives|
Simultaneous connection to select RS 232
PIN 7| RS 232 _TX| Connect PIN 7 and PIN 8, Unicom RS 232 send
LED status table
The H 9380 S Android IPC has four LED indicators that indicate the operating and network status of the H 9380 S Android IPC. The LED status is described in the following table.
| LED | Description | Status |
|---|
Power
PWR
PWR
|
Device power-off
|
Off
Device power-on
|
ON
WIiFi/APP 灯Wifi/App lamp
WiFi/SYS
WiFi/Sys
| System startup or system exception with no self-starting APP|
Off
System operating normally, self starting APP normal
| Slow flashing (on
0.25 s, off 0.75 s)
System running normally, self start APP exception
| Slow flashing (on
0.25 s, off 1.75 s)
System is up and running, no self-starting APP
| Slow flashing (on
0.25 s, off 3.75 s)
Open WiFi Station mode and connect successfully| Chang Liang
WiFi off or WiFi not connected| Off
USB/TF card upgrade status table
During upgrade| Slow flashing of all LEDs except power supply (on 0.25 S, off
1.75 S)
---|---
Upgrade successful| All LEDs are solid except power
Upgrade failed| Flash all LEDs except power (on 0.25 S, off 0.25 S)
Product features
Functional class| Functional subclass| ****
Functional description
---|---|---
Android
| Application installation| Support for Android Market Application
Installation and Autonomic Development Application Installation
Background service| ****
Support background service mode monitoring application
Autostart
| Enables you to specify application of full screen automatic open and exception automatic recovery
Status statistics
| ****
Status statistics
| Support each interface module to record diagnostic information (meet the basic requirements of tristate)
Support serial port, network and audio/video interface for communication status recording
Support peripheral hardware detection Support for app traffic usage logging
Support APP operational monitoring (meeting the basic requirements of tristate)
Clock synchronizati on| Clock synchronizatio n| ****
NTP clock synchronization and remote management platform clock synchronization, time zone can be set
Security management| Security management| Lan side secure access control
Firewall support
Remote administratio| Upgrading updates| Support remote upgrade system and
application components, support remote APP upgrade and rollback
n| ****
State management
| Enables cloud platform remote statistical analysis device to escalate operational status
Support for cloud platform device failure management
---|---|---
Timing on-off| ****
Timing on-off
| Support the user to control the power off completely and protect the power off fully
Audio and video output
| Audio output| Supports 3.5 mm headphone interface standard output
Touch screen interface| ****
Supports both HDMI interface video output
Touch screen compatible| Supports 10.1 inch resistive touch screen (Huiguanchip), 27 inch, 43 inch infrared touch screen
GPIO port interface Reservation
| One way input| Support user input control
Four-way output| ****
Support for user output control (system instructions)
Equipment USE
Installation check
- Whether the TF card are plugged in tightly.
- Whether the serial port and the gateway on the panel are plugged in tightly.
- Check the audio and video connectors for loose connections.
- Check each USB external connection for loose connections.
Power on and power off of equipment
- Use the power adapter that is specified by the device (standard 12V2A power adapter).
- Check the status of the LEDs when the device is powered on, refer to the LED status table on page 10. Observe that the display can open the self-starting APP interface normally and that it can open to start working properly.
- When the device is powered on, power is required to power off the device to prevent damage to the card, TF card, and various peripherals
Power-on operation
Power on the device and the power indicator (PWR) is always on, indicating a
successful power-on to the device. After 20-30 seconds, the system/self-
starting APP LED (SYS/APP) illuminates every 4 seconds, indicating that the
device is operating normally.
Audio and video service
Connecting an HDMI or VGA or LVDS display to your business needs allows you to
display the output separately or simultaneously using one screen or both, and
to display the output normally means that the audio and video service is norma
PS: If you need to use a customized touch screen, you need to provide the
drive of the touch screen, or PID, VID number to our company, written to the
system before the normal use of the touch screen
Self-starting APP service
Monitor an app by configuring one of the apps in Settings-Accessibility-
Primary Secondary App, which is set to start the primary app or secondary app
from scratch. When the device is powered on, the device will actively set up
the main APP as a self-starting APP, automatically start on the display,
display in the front, and the secondary APP in the background. A self-starting
APP can be displayed normally, meaning that the self-starting APP business is
normal. When the device needs to be debugged, you can press the custom button
to return to the desktop for debugging, and the self-starting APP will be
pulled up again in five minutes.
Serial port peripheral（Reserve）
If you need to use the serial interface peripheral (such as 2D code scanning
head, printer, motor drive board, etc.), you need to keep the serial port node
name corresponding to each serial port peripheral and our serial port node
name consistent before normal communication.
USB peripheral
If you need to use a universal USB peripheral such as a mouse button disk, you
can plug and play ; If you need to use special USB peripheral (such as USB
printer, ID card reader, etc.), you need to provide USB drive, or PID, VID
number to our company, write to the system before normal use.
Maintenance
- Ensure that equipment is not wet or damaged in the field or in the open air.
- To ensure the insulation between the equipment and the contact body, the live articles shall not be exposed to the equipment.
- No modules and components on the device may be replaced while the device is charged.
- Do not open or remove the equipment without the guidance of our professional staf
FCC STATEMENT
This equipment complies with radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body.
SIMPLIFIED EU DECLARATION OF CONFORMITY
The simplified EU declaration of conformity referred to in Article 10(9) shall
be provided as follows:
Hereby, [Hongdian Corporation] declares that the radio equipment type [Android
IPC, H9380S] is in compliance with Directive 2014/53/EU.
In accordance with Article 10(2) and Article 10(10), this product is allowed
to be used in all EU member states. Use the Android IPC in an environment with
a temperature between -20℃ and 60℃.
Risk of explosion if the battery is replaced by an incorrect type. Dispose of
used batteries according to the instructions. The device complies with RF
specifications when the device used at 20cm from your body. Manufacturer：
Hongdian Corporation Address： F14-16, Headquarter Economic Center Building,
ZhonghaixinScience&Tech Park, Bulan Road, Longgang District, Shenzhen 518112,
China. The full text of the EU declaration of conformity is available at the
following internet address: http://www.hongdian.com
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment
Note: This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.This equipment should be installed and operated with a minimum distance 20cm between the radiator& your body.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>