HumminGuru HG10A Record Adapter Instruction Manual
- June 6, 2024
- HumminGuru
Table of Contents
HumminGuru HG10A Record Adapter
Read these instructions carefully before use and keep it for future reference.
The package includes
- Record adapter X1
- Rubber stoppers X4
WARNING
- Do not bend, break, or throw the adapter. Doing so may result in product damage or injury.
- Avoid sunlight and keep in shade. Failure to do so will result in product damage.
- Keep the rubber stoppers out of reach of children less than 8 years.
INSTALLATION AND USE
To install and use, follow the steps below:
- Pay attention to the direction of the rubber stoppers.
- Insert the rubber stopper into the slot on the adapter ring.
- Apply to all four slots.
- Push the 2 bottom rubber stoppers toward the outer ring of the adapter.
- Insert the record into the gap of the 2 top rubber stoppers.
- Slide the 2 bottom rubber stoppers toward the record and secure it.
- Insert the adapter into the cleaner. To take out the record, repeat step 4.
Notice
- The rubber stoppers on the top two slots are non-movable. Only the bottom ones are movable.
- The 7” adapter was used as an illustration example. Apply the same installation method to the 10” record adapter.
- Insert the adapter gently into the cleaner with both hands.
- Each record is slightly different in terms of size and thickness. The record adapters are designed based on the standard record size.
HumminGuru Record Adapter
- Model: HG7A | HG10A
- Product Size: 303 x 303 x 2 mm
- Package Size: 325 x 325 x 21mm
Happy Well International Enterprise Ltd.
Rm. 1202 12/F New Mandarin Plaza, Tower B No. 14 Science Museum Road,
Tsim Sha Tsui East, Kowloon
Hong Kong
(852) 2544 2728
© 2021 Happy Well International Enterprise Ltd. ALL RIGHTS RESERVED.
MADE IN CHINA Find out more at humminguru.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>