Shenzhen Yuangu Technology AST3 Wireless Speaker User Manual
- June 6, 2024
- Shenzhen Yuangu Technology
Table of Contents
Wireless Speaker
User Manual
Model: AST3
Safety Instructions
Avoid dropping. Do not disassemble. Can be immersed in water of 1m depth for up to 30 minutes. Avoid extremely high or low temperatures. Do not use the device outdoors during thunderstorms. Use original charging cable. Do not use any corrosive detergents or oils to clean the device. Do not expose batteries to heat sources, such as direct sunlight, fire, etc.
What’s In the Box
Product Overview
- Play/Pause Button
- Bluetooth &TWS Mode Button
- Volume +
- Volume –
- Power Button
- Bass Boost Button
- USB-C Charging Port
- LED Indicator
Charging
| Flash red light slowly | Low battery |
|---|---|
| Red light always on | Charging |
| Off | Fully charged |
Notes:
- Please use the supplied USB cable to charge the speaker and make sure it has been fully charged before the first time used.
- Disconnect the speaker from the charger when fully charged. Do not overcharge the speaker.
- When not in use, store the speaker in a cool place.
Turn On/Off
- Press and hold the power button for 2 seconds to turn on the speaker, the LED indicator displays white light for 1 second and a voice prompt”AXLOIE” will follow.
- Press and hold the power button for 2 seconds to turn off the speaker, the LED indicator will be off and a voice prompt “Power Off” will follow.
Bluetooth Mode
- Press the Bluetooth button twice, the speaker will enter Bluetooth pairing mode, the LED indicator will flash red and white lights alternately and a voice prompt”Pairing” will I follow.
- Turn on Bluetooth on your device, search “AXLOIE 02” and click to connect. After successful connection, the LED indicator displays white light, and a voice prompt “Connected” wi II follows.
Notes:
- When turned on, the speaker will automatically connect to the most recently connected device if available. If the speaker has not connected to a device, press the Bluetooth button twice to enter Bluetooth pairing mode
- To pair another device, press the Bluetooth button twice to re-enter pairing mode, then repeat the pairing steps.
- Have connection problems? Remove AXLOIE 02 from the Bluetooth list of your device and make sure the distance is less than 3ft. Then try pairing again.
- To get the best sound quality, make sure it’s barrier-free between the device and speaker.
Control
| Press the play/pause button once | Play/pause |
|---|---|
| Press the play/pause button twice | Next track |
| Press the play/pause button three times | Previous track |
| Press the play/pause button once | Answer/end a call |
Press and hold the play/pause button for 1
second
| Reject a call
Press the bass boost button once| Turn on/off bass boost
Press and hold the play/pause button for 2 seconds| Activate Siri or other
voice assistants
Press the volume +/- button| Adjust the volume
Press and hold the volume + and volume — buttons at the same time for 5
seconds| Restore the defaulted factory settings
Press and hold the power button for 8 seconds| Forced power-off
TWS Mode
- Choose either of the speakers as main speaker. Make sure the main speaker has been turned on and connected to a Bluetooth device (such as a mobile phone). Press and hold the Bluetooth button for 3 seconds to enter the TWS pairing mode, a voice prompt “TWS Mode’ will follow and the indicator continuously flashes white light twice.
- The other speaker is used as the secondary speaker. Turn it on and make it enter Bluetooth pairing mode (If it has been connected to one Bluetooth device already, please press the Bluetooth button twice to enter Bluetooth pairing mode). A voice promprPairing” will follow and the indicator flashes red and white light alternately.
- Take the secondary speaker close to the main speaker then it will connect to the main speaker automatically. After a successful connection, a voice prompt “Connected’ will follow. The indicator of the main speaker displays white light and the secondary one flashes white light slowly.
- Exit the True Wireless Stereo pairing mode. Press and hold the Bluetooth button on either of the speakers for 3 seconds, a voice prompt ‘Disconnected’ will follow. At this time, the main speaker keeps connected with the Bluetooth device and the indicator displays white light. The secondary speaker will re-enter Bluetooth pairing mode and the indicator flashes red and white light alternately.
Note: With True Wireless Stereo pairing technology, the left and right channels are respectively connected to two speakers by pairing one AXLOIE 02 speaker with another AXLOIE 02 speaker, achieving the best sound effect.
Specifications
Note: Specifications are subject to change without notice.
Input: 5V 2A
Audio Output: 2 x 5W
Charging Time: 2.5 hours
Play Time (varied by volume level and audio content): 12 hours
Dimensions: 90 x 90 x 170mm
Weight (without packaging): 510g / 18oz
Bluetooth Version: V4.2
Bluetooth Range: 20m / 66ft
Contact Us
Email support@axloie.com
✓Technical Support
✓Customer Service
Website
www.axloie.com
✓ Discount ,/ Extra Warranty of 6 months
✓ Online Chat
✓ E-mail CEO
Social media
@axloie
✓ Giveaway
✓ Coupon
✓ Event
Tel.
US/CA: +1-888- 795-8560 Mon-Fri 9:00-17:00 (PST) UK: +44 -121-7900609 Mon-Fri
8:00-17:00 (GMT) DE: +49 15735989502 Mon-Fri 9:00-18:00 Email:
support@axloie.com FCC ID: 2ATWG-AST3 IC:
26891-AST3 This device complies with CAN ICES-3 (B)/NMB-3(B).
Prolinx GmbH Brehmstr. 56, 40239 Duesseldorf Germany Shenzhen Yuangu
Technology Co., Ltd. No.101, 1st Factory Building, Hebei Industrial Park,
Ma’antang Community, Hebeizhongxing Road, Bantian Sub-district, Longgang
District, Shenzhen, China This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.
IC Caution:
This device complies with Industry Canada s licence-exempt RSSs. Operation is
subject to the following two conditions:
- This device may not cause interference; and
- This device must accept any interference, including interference that may cause undesired operation of the device.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>