Shenzhen Yuangu Technology F1 Truly Wireless Earbuds User Guide

June 6, 2024
Shenzhen Yuangu Technology

Shenzhen Yuangu Technology F1 Truly Wireless Earbuds User Guide
Shenzhen Yuangu Technology F1 Truly Wireless Earbuds

Wearing

Wearning

Wearing: Choose the silicone eartips and wingtips that are most suitable for your ears (The medium-sized eartips are pre-mounted on the earbuds).

Charging

Charging Instructions

Charging: For initial use, please tear off the protective films from earbuds first, and use the USB-C cable to charge the charging case (with earbuds in the case).

On/Off

On/off

On/Off: If the charging case still has battery power, the earbuds will automatically turn on once you open the charging case and take them out of the case. If you need to turn off the earbuds, please put them back into the case correctly
Note: The earbuds can be turned on manually by pressing and holding the touch buttons on earbuds for 2 seconds, or turned off manually by pressing and holding the buttons for 5 seconds in non-playing status,

Pairing

Pairing Instructions

Pairing: Open the charging case and take out the earbuds, the earbuds will automatically enter Bluetooth pairing mode. The indicator of the main earbud will flash red and white light alternately and the indicator of the secondary earbud will flash white light for 1 second then go out. Select “AXLOIE Ft from the Bluetooth list of your device and click to connect.

Control

Control
Control
Control

Control
Play/pause: Double-tap LR
Previous/next song: Press and hold L/R for 2 seconds
Volume down/up: Tap L/R once
Answer/hang up a call: Double-tap L/R
Reject a call: Press and hold UR for 2 seconds ANC/Transparency/Normal mode switching: Triple-tap R to turn on ANC mode; Triple-tap R again to turn on Transparency mode; Triple-tap R the third time to switch to Normal mode.
Voice Assistant (eg Siri): Triple-tap L

Notes

  1. In mono mode, volume adjustment is unavailable.
  2. In transparency mode, you can still stay aware of the sounds from surroundings while listening to the music.

RE-PAIRING

REPAIRING INSTRUCTIONS

Forced Pairing Mode: Pair with other devices: put the earbuds in the charging case, keep the charging case open, then press and hold the button on the charging case for 3 seoonds, and the three LED indicators on the charging case will simultaneously flash white light 3 times then go out At this time, please search l’AXLOIE Fl” in the Bluetooth list of your phone and dick to connect.

RESET

RESET INSTRUCTIONS

Reset: If the earbuds cannot pair with each other or pair with other devices, please reset the earbuds. Put the earbuds in the charging case, keep the charging case open, and then press and hold the button on the charging case for 10 seconds, At this time, the three LED indicators on the charging case will simultaneously flash white light 5 times then go out Close the charging case, and the earbuds have been reset successfully.

DESCRIPTIONS OF LED INDICATORS

PRODUCT OVERVEIW

LED indicators of charging case:

 White light flashes for 5s then goes out (charging case in low battery)
Breathing white light (charging case hasn’t been fully charged)
White light constantly on (charging case has been fully charged)

LED indicators of earbuds

  • Breathing red light (earbuds haven’t been fully charged)
  • Red light off (earbuds have been fully charged)

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received including interference that may cause undesired operation.

This device complies with CAN ICES-3 (B)/NMB-3(B).

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help

Tel.
US/CA: +1-888- 795-8560 Mon-Fri 9:00-17:00 (PST)
UK: +44 -121-7900609 Mon-Fri 8:00-17:00 (GMT)
DE: +49 15735989502 Mon-Fri 9:00-18:00
Email: support@axloie.com
Model : ET10
FCC ID: 2ATWG-ET1OL
IC: 26891-ET1OC
FCC ID: 2ATVVG-ET1OR
IC: 26891-ET10

Prolinx GmbH
Brehmstr. 56, 40239 Duesseldorf
Germany
Shenzhen Yuangu TechnologyCA. Ltd NMI 1st Factory &Wing, Hebei Industrial Park Ma’antang Community, Hebeizhavong Road. Bastian Sub-district, Lcoggang District Shenzhen China
Made In China
ICONS

Support

For FAQs, detailed user manual and more information, please visit https://www.axloie.com or contact us via Email – support@axloie.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals