XTREAM XBE90125 Mini True Wireless Earbuds User Guide

June 6, 2024
XTREAM

855.999.8041|WWW.XTREMECABLES.COM

Your NANO charging case and earbuds have built-in rechargeable batteries for convenient wireless use. Be sure to fully charge the batteries before initial use or when the wireless earbuds have not been used for an extended period of time.

ACTIVATING YOUR NANO EARBUDS

  1. To power on, take the earbuds out of the charging case or press and hold the left and right earbuds’ multifunction button for 3 seconds.
  2. To power off, put the earbuds into the charging case or press and hold the left and right earbuds’ multifunction button for five seconds.

BLUETOOTH® PAIRING
Earbud to Earbud Pairing
Take the earbuds out of the charging case or press and hold the left and right earbuds multifunction button for 3 seconds until the red and blue lights flash alternatively. The earbuds will enter pairing mode and the primary earbud will continue flashing red and blue while the secondary earbud will flash slowly, indicating that the earbuds are paired successfully.

Pairing to Your Phone or Bluetooth® Device
Enable the Bluetooth® function on your phone or device. Note that the method will differ depending on your Bluetooth® device. Apple phones will automatically search for earbuds. For Android phones, you will need to manually search for a Bluetooth® device. When the ‘Nano’ earbuds are found by your phone/device, click on ‘Nano TWS’ to complete the pairing. The earbuds will sound prompt ‘Connected’ when pairing is successful.

Mono Mode Pairing
The two earbuds can be paired with the Bluetooth® device separately. Follow the pairing instruction in the previous step, to pair one earbud separately. Note: The next time the earbuds are powered on, they will automatically connect the previously connected phone/device.

USING YOUR NANO EARBUDS

  1. To pause and play audio, momentarily click the left and right earbuds’ multifunction button once.
  2. While playing music, press the left earbud’s multifunction button 3 times to raise the volume, and press the right earbud’s multifunction button 3 times to lower the volume.
  3. While playing music, press the right earbud’s multifunction button twice to advance to the next track/song, and press the left earbud’s multifunction button twice to go to the previous track/song.
  4. To answer incoming phone calls, click the left and right earbuds multifunction buttons.
  5. To end the call, press the left and right earbuds multifunction buttons.
  6. To reject a call, long press the left and right earbud multifunction button for 2 seconds.
  7. Press the left and right earbud’s multifunction button for 2 seconds to enable Sid on an iPhone. Note: When the battery on the earbuds are low, a tone will be played every 30 seconds until the headset is powered off.

CHARGING YOUR EARBUDS

Charging the Charging Case
Connect the USB charging cable to a USB power adapter or other USB charging port. Then plug the other end of the cable into the charging case’s port. The battery charging status will be displayed on the case’s LED display. The case is fully charged when ‘100’ is displayed.

Charging the Earbuds
Ensure that the earbuds are placed in their correct L and R slots of the case. So long as the case is charged, it will charge the earbuds without needing to be connected to a power supply.

USEFUL TIPS

  • Performance can be affected by the environment or when the earbuds become discharged.
  • Interruption can be caused by obstacles between the earbuds and the Bluetooth device, by wi-fi or other high-frequency signals, or if the earbuds are brought out of range of the Bluetooth device (approx. 33 ft).
  • To maintain healthy battery performance, charge the charging case (and earbuds) periodically, if not in use.

SAFETY AND CARE INSTRUCTIONS

Failure to follow these safety instructions can lead to fire, electrical shock, personal injury, property damage or damage to this unit. Make sure to read this entire manual before initial use.

  • Do not use earbuds in high-traffic areas or environments where accidents could occur as a result of inattention or slowed reaction.
  • Do not use this unit for anything other than its intended use.
  • Keep the unit away from heat sources and direct sunlight.
  • Do not expose the unit to extremely high or low temperatures.
  • Do not let the unit come in contact with water or any liquid. If it becomes wet, immediately unplug from the power source.
  • Do not use the unit if damaged. To ensure safety, repairs should only be performed by a qualified technician.
  • When fully charged, disconnect from the charging source.
  • Place the unit on a flat, sturdy surface during charging.
  • Keep the unit out of reach of children as this product is not a toy.

FCC CAUTION

Any changes or modifications not expressly approved by the party responsible for compliance could void this user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does not cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FCC RADIATION EXPOSURE STATEMENT:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This transmitter must be co-located or operating in conjunction with any other antenna or transmitter.

ONE YEAR WARRANTY
Xtreme warrants its products for one year against defects in manufacturing under regular consumer use with the original receipt of retail purchase. We believe in our products and want to provide you with a replacement if needed, but we have to know about the problem while the product is still under warranty. If you discover a defect covered by this warranty, please contact us about receiving a replacement. In order to use the product’s warranty, the customer must provide proof of the retailer’s receipt. *Any customers outside of the U.S. will be responsible for shipping and handling charges if a replacement is required that is not due to a manufacturing defect. If there is not a manufacturing defect, shipping and handling will be applied. Xtreme’s warranty is limited to our products only. Our warranty does not cover the replacement or repair cost of any third-party accessory, electronic device or personal property.
For instructions about how to obtain warranty service for your product, please contact Customer Service: customerservice@xtremecables.com.
Content is subject to change without prior notice. Some content may differ from how the product works with your specific device.

SPECIFICATIONS:
Bluetooth 5.0
Earbud Battery: 40mAh
Battery Case: 300mAh

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals