todoc MTH-I-1 Wireless low Frequency Massage Earphone User Manual
- June 6, 2024
- todoc
Table of Contents
MTH-I-1 Wireless low-Frequency Massage Earphone
User Manual
Product description
Connection | Bluetooth version | Bluetooth v5.2 |
---|---|---|
Basic Specifications | Mobile APP | |
Package Components | Android |
Charging Case, INEAR, Eartips USB Cable, Quick Guide
Sensor| Hall Sensor|
Appearance Specifications| LINEAR Module (W x L x T) CRADLE Module (W x L x
T)| 20.84 x 45.58 x 30.81 mm 75.98 x 75.97 x 36 mm
Battery| Using Time
LINEAR Module CRADLE Module| 2.5 h
71 mAh 500 mAh
LINEAR Function| Stimulation Audio| Biphasic Pulse Output level: 35 step
Only Sound Play (by mobile phone)
Product Basic Information| Product Name
Manufacturer
Country of manufacture Certification| Low Power Wireless Device TODOC
Korea
KC, FCC
Directions for use
Step One
Open the cover of all ears product and take out the linear Left & Right
module;
Connect the all ears years module from the mobile phone’s Bluetooth list.
Step Two
You can find the application with the name [ all ears ] on an Android
mobile phone;
When connected, the remaining battery level information is displayed.
Step Three
Please wear it both ears as shown in the picture.
Step Four
After wearing, use the app to operate your in-ears device;
Use the application as follows.
- Mode Setting (6 types)
- Level Setting (1~35step)
- Start/Stop
Step Five
When the all ears cradle’s battery is low and the red LED blinks, use the USB
C-type cable to charge;
There is a USB port on the back of the product.;
Charge it using a 5V power adapter.
FCC Compliance Statement
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to correct the interference by one of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment. This
transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 5 mm between the radiator and your body. This
transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
Thank you Minsu Yoon
Documents / Resources
|
todoc MTH-I-1 Wireless low Frequency Massage
Earphone
[pdf] User Manual
MTH-I-1, MTHI1, 2A35ZMTH-I-1, 2A35ZMTHI1, MTH-I-1 Wireless low Frequency
Massage Earphone, Wireless low Frequency Massage Earphone
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>