ANKER A2763 PowerPort Cube USB with 3 Outlets and 3 USB Ports User Guide
- June 6, 2024
- Anker
Table of Contents
A2763 PowerPort Cube USB with 3 Outlets and 3 USB Ports
Welcome Guide
PowerPort Cube
What’s in the Box
Overview
- On/Off switch (for USB output only)
- USB output
- AC outlet
To use the USB charging function, press the On/Off switch when PowerPort Cube
is connected to a power source.
Using Your PowerPort Cube A
Using the Adhesive Strip
If necessary, you can use the adhesive strip to affix PowerPort Cube onto a surface.
Specifications
| AC Input | 125V AC 60Hz 10A |
|---|---|
| AC Output | 125V AC 60Hz 10A 1250W |
| USB Output | 5V = 3.6A (2.4A Max Each Port) |
| Size | 62x 62 x 62 mm/2.4 x2.4 x2.4 in |
| Weight | 284 g /357 g /405 g / 10 oz / 12.9 oz / 14.2 oz |
| Cable Length | 5ft / 8ft/ 10ft (Cable length varies depending on the product) |
Safety
- Do not connect PowerPort Cube to an ungrounded outlet.
- Do not use with extension cords.
- Do not exceed electrical ratings.
- Use in dry locations and indoors only.
- Keep PowerPort Cube away from heat-emitting appliances such as radiators.
- Keep children away from PowerPort Cube.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
The following importer is the responsible party.
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100,
Ontario, CA 91764
Telephone:1-800-988-7973
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road,
Mongkok, Kowloon, Hong Kong
ISED Compliance Statement
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science, and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions: 1. This device
may not cause interference. 2. This device must accept any interference,
including interference that may cause undesired operation of the device.
Customer Service
18-month limited warranty
Lifetime technical support
support@anker.com
(US) +1 (800) 988 7973 Mon-Fri 9:00am – 5:00pm (PT)
(UK) +44 (0) 1604 936200 Mon-Fri 6:00 – 11:00 (GMT)
(DE) +49 (0) 69 9579 7960 Mon-Fri 6:00 – 11:00
For FAQs and more information, please
visit:anker.com/support
@Anker
@Anker Japan
@Anker Deutschland
@AnkerOfficial
@Anker_JP
@Anker
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>