Hongkong Choice Electronics A11 Wireless Bluetooth Earphones Instruction Manual
- June 6, 2024
- Hongkong Choice Electronics
Table of Contents
Wireless Bluetooth Earphones
A11 (BTS1505TWS) Instruction Manual
Specification
Wireless Version: | 5.0 |
---|---|
Support Protocols: | A2DP1.3/HFP1.6/HSP1.2/AVRCP1.6/D11.3 |
Bluetooth Frequency: | 2.4G |
Working Distance: | 10m |
Playing/Talking time: | 5hours |
Charging box capacity: | 250mA |
Earbuds battery: | 35mA |
Operation:
Auto Power On, Auto Pair
When opening the charging case, the earbuds will be Power On Automatically,
after a few seconds, the 2 earbuds will be paid automatically.
And then you search the Bluetooth devices by your phones, will detect the
earbuds’ name: BTS1505TWS, Click it to connect to your phones.
Main Function:
-
Phone calls
Answer Call/Hang up Call: Touch the earbuds.
Decline: Touch and hold 2 seconds the earbuds. -
Listening to Music
Play or Pause: Touch once to start and stop track.
Preview Track: Double Touch left earbud.
Next Track: Double Touch right earbud. -
Voice Enable
Triple Touch the earbuds to enable voice function on your phone. -
Power Off
Long touch the earbuds for 5 seconds, then the earbuds will be powered off. It would be powered off automatically when the earbuds are away from your Bluetooth device for over 3 minutes, So do not worry the power is exhausted.
In the Power off-model, touch the earbuds for around 2 seconds, it will be Power On. -
Charging:
A. Earbuds charging: Put the earbuds into the charging case and close the cover, the earbuds will be turned off automatically till full.
B. Charging case charging: Connect the charging case via USB cable to a USB charger or device with a USB port, During charging, the led light flashes Orange, then turns solid when fully charged.
Precautions
- The earbuds should be stored in a dry and ventilated environment, to avoid oil, water, moisture, and dust affecting product performance.
- Avoid using stimulus, organic solvents, or items containing these ingredients to clean the earbuds.
- The use of earbuds should be correct as per the specification, pay attention to the use the influence of the environment on the earbuds. In order to ensure a smooth connection, it’s recommended that the distance between the earbuds and phones is within 10 meters.
- If the earbuds failed to connect or with poor connection, please do not take apart the earbuds or the accessories on your own, Otherwise, no warranty.
- Regarding charging earbuds. Please use the standard USB cable or pointed charging cable from our company to charge the earbuds.
- In order to ensure normal use, please ensure sufficient power of the earbuds.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment
has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirements.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>