C4i HDV-E5100 HDMI Over IP Extender with Lop Out User Manual

June 6, 2024
C4i

C4i HDV
HDMI over IP Extender with Loop Out (150m)

User Manual
VER 1.0

Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.
Surge protection device recommended
This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge protection systems is highly recommended in order to protect and extend the life of your equipment.

Introduction

HDMI over IP Extender is based on AV over IP solution for distribution of one HD content to one HD display device or to multiple HD display devices over a standard network switcher and extends distance up to 492ft / 150m between encoder and decoder via a CAT5e/6 cable. It offers configurable high quality, low-bandwidth H.265 compression video. The resolution is up to 1920×1200@60Hz. It also supports HDMI loop output on the transmitter.
HDMI over IP Extender includes two units: Encoder and Decoder. The encoder is responsible for obtaining HDMI signals for encoding, transmitting via CAT5e/6 cables. It supports HDMI loop output; Decoder is responsible for signal decoding and outputting HDMI signals to HD displays. The product supports one- way IR control signal transmission. It offers the most convenient solution for HDMI extension over a single CAT5e/6 cable and is the perfect solution for any application.

Features

  • HDMI 1.3 and HDCP 1.4 compliant
  • Support 6.75Gbps video bandwidth
  • Video resolution is up to 1920×1200@60Hz
  • Extend distance up to 492ft / 150m between encoder and decoder via a single CAT5e/6 cable
  • Adopt standard H.265 encoding/decoding
  • Support standard IP switcher/router/hub
  • Support one-way
  • IR control signal transmission
  • Compact design for easy and flexible installation

Package Contents

  1. 1× HDMI over IP Extender (Encoder)
  2. 1× HDMI over IP Extender (Decoder)
  3. 1× IR Blaster cable (1.5 meters)
  4. 1× 20~60KHz IR Receiver cable (1.5 meters)
  5. 2× 5V/1A Power Adapters
  6. 1× User Manual

Specifications

Technical

HDMI Compliance| HDMI 1.3
HDCP Compliance| HDCP 1.4
Video Bandwidth| 6.75Gbps
Video Resolution| 640×480@60Hz-1920×1200@60Hz
HDMI Audio Formats| LPCM 2.0CH, 32KHz, 44.1KHz, 48KHz
IR Frequency| 20Hz – 60KHz
Compression Technology| H.265
Request for Switcher /Router| Support IGMP, Support DHCP
Color Space| RGB, YCbCr 4:4:4, YCbCr 4:2:2
Color Depth| 8-bit
ESD Protection| Human body model—±8kV (Air-gap discharge) & ±4kV (Contact discharge)
Connection
Encoder| Input: 1x HDMI IN [Type A 19-pin female] Output: 1x HDM I OUT [Type A 19-pin female] lx CAT OUT [RJ45 connector] Control:1 xIR OUT [3.5mm Stereo Mini-jack]
Decoder| Input: 1 xCAT IN [RJ45 connector] Output: lx HDM I OUT [Type A 19-pin female] Contro1:1xIR IN [3.5mm Stereo Mini-jack]
Mechanical
Housing| Metal Enclosure
Color| Black
Dimensions| 88mm (W) x 61.2mm (D) x 16.5mm (H)
Weight| Encoder: 158g, Decoder: 155g
Power Supply| Input: AC100 – 240V 50/60Hz, Output: DC 5V/1A (US/EU standard, CE/FCC/UL certified)
Power Consumption| Encoder: 2.55W, Decoder: 3.7W
Operation Temperature| -10°C – 50°C / 14°F – 122°F
Storage Temperature| -20°C – 60°C / -4°F – 140°F
---|---
Relative Humidity| 20-90% RH (non-condensing)
Resolution /
Distance| 1920×1200@60Hz – Feet / Meter
CAT 5e/6 cable| 492ft / 150 meters
Resolution /
Cable length| 1920×1200@60Hz – Feet / Meter
HDMI IN / OUT| 50ft / 15 meters

Operation Controls and Functions

5.1 Encoder Panel

Name Function Description
HDMI OUT HDMI Loopout port for connecting the HDMI display device.
HDMI IN HDMI source input port for connecting the HDMI source device.

RESET
button| Press and hold the button for 3 seconds to reset the product.
The EDID will restore default status: 1920*1080©60Hz.
CAT OUT| The CAT OUT port is connected to the CAT IN port on Decoder or connected to switcher/router/hub with CAT cable for sending a signal to the receiver.
IR OUT| Connect to the IR blaster cable. The IR blaster signal is from IR IN on the Decoder.
LINK LED| The LED will flash blue when the encoder is connected to a decoder or connected to a witcher/router/hub.
---|---
POWER LED| The LED will illuminate blue when the encoder is powered on.
DC 5V| Plug the DC 5V/1A power supply into the unit and connect the adapter to an AC outlet.

5.2 Decoder Panel ****

Name Function Description
HDMI OUT HDMI output port for connecting the HDMI display device.
RESET button Press and hold the button for 3 seconds to reset the product to

the factory default status.
Short press the button to copy EDID from the decoder display device to the encoder’s HDMI source device.
CAT IN| The CAT IN port is connected to the CAT OUT port on Encoder or connected switcher/router/hub with CAT cable for receiving encoder signal.
IR IN| Connect to wideband IR receiver cable. The IR signal is sent to the IR OUT port on the Encoder.
LINK LED| The LED will flash blue when the decoder is the connected encoder or connected switcher/router/hub.
POWER LED| The LED will illuminate blue when the Decoder is powered on.
DC 5V| Plug the DC 5V/1A power supply into the unit and connect the adapter to an AC outlet.

Application Example

Figure 1: Encoder connects directly Decoder

Figure 2: Encoder connects Decoder via switcher (one Encoder to multiple Decoders)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals