C4i TPUH660 eARC Extender Over HDBT3.0 User Manual

: June 5, 2024
: C4i

Table of Contents

Product Introduction
Features
Panel Description
Receiver
System Connection
Read User Manual Online (PDF format)
Download This Manual (PDF format)

TPUH660 eARC Extender Over HDBT3.0
**User Manual
All Rights Reserved
Version: TPUH660_2022Beta

**

Product Introduction

Thanks for choosing the HDBT3.0 eARC Extender, which consists of a transmitter and a receiver. It can extend 4K or 1080p video to a distance up to 328 feet (100 meters) over a single CAT6A cable without compression. It supports years. It also supports bi-directional IR pass-through control. 24V PoC feature allows the transmitter and the receiver can be powered by each other and only one power adapter is needed in the system.

Features

18Gbps high bandwidth, HDMI V2.0.
HDMI video resolution up to 4K@60Hz 4:4:4, HDR10, Dolby Vision.
Supports HDCP bypass and HDCP 2.2 compliant.
HDBaseT 3.0 solution which supports extending signal without compression.
Extends 4K or 1080p video signals to distances up to 328 feet (100 meters) over a single CAT6A cable.
Bi-directional IR pass-through control.
Supports bi-directional 24V PoC.
Supports eARC (Enhanced Audio Return Channel).
Provides HDMI loop out on transmitter.

Packing List

lx Transmitter
lx Receiver
4x Mounting Ears & 4 Screws
8x Plastic cushions
Ix Power Adapter (24V DC 1.25A)
lx User Manual

Note: Please contact your distributor immediately if any damage or defect in the components is found.

Panel Description

Transmitter

HDBT OUT : RJ45 port to connect the HDBT input port of receiver by CAT6A Ethernet cable. The LINK LED illuminates when there is a valid HDBaseT link between the transmitter and the receiver. The HDCP LED illuminates when the video contains HDCP content.
SPDIF OUT: Connects to audio player (e.g. amplifier) for ARC audio output.
DC 24V: DC connector for the power adapter connection.
POWER LED: Illuminates green when power is applied, or blinks when in firmware upgrade mode.
HDMI IN(eARC): Type-A female HDMI input port to connect an HDMI source device.
LOOP OUT: Connects to HDMI display device.
IR IN: Connects to the IR receiver for IR pass-through.
IR OUT: Connects to the IR emitter for IR pass-through.

Receiver

HDBT IN: RJ45 port to connect the HDBT output port of transmitter by CAT6A Ethernet cable. The LINK LED illuminates when there is a valid HDBaseT link between the transmitter and the receiver. The HDCP LED illuminates when the video contains HDCP content.
SPDIF IN: Connects to ARC audio source device (e.g.TV).
DC 24V: DC connector for the power adapter connection.
POWER LED: Illuminates green when power is applied, or blinks when in firmware upgrade mode.
FW: Micro-USB port for firmware upgrade
HDMI/SPDIF: DIP switch for ARC/eARC mode selection.
• HDMI: Select the audio source of the HDMI port of the Receiver and send it back to the SPDIF OUT and HDMI IN of the Transmitter
• SPDIF: Select the audio source of the SPDIF port of the Receiver and send it back to the SPDIF OUT and HDMI IN of the Transmitter.
HDMI OUT(eARC): Connects to HDMI display device.
IR IN: Connects to the IR receiver for IR pass-through.
IR OUT: Connects to the IR emitter for IR pass-through.

System Connection

When the DIP switch is selected to HDMI, and the TV supports eARC, the TV audio can be transmitted back to the transmitter via the HDMI output port of the receiver, and then it will be output by the HDMI IN(eARC) port of the transmitter.
When the DIP switch is selected to SPDIF, the ARC audio can be transmitted back to the transmitter via the SPDIF IN port of the receiver, and then it will be output by the SPDIF OUT & HDMI IN(eARC) port of the transmitter. Note: Please tot to restart the extender if the eARC function works abnormally.

| Transmitter| Receiver
---|---|---
Video
Input| (1) HDMI IN| (1) HDBT IN
Input Connector| (1) Type-A female HDMI| (1) RJ45
Input Resolution| Up to 4K@60Hz 4:4:4
Output| (1) HDBT OUT, (1) LOOP OUT| (1) HDMI OUT
Output Connector| (1) RJ45, (1) Type-A female HDMI| (1) Type-A female HDMI
Output Resolution| Up to 4K@60Hz 4:4:4| Up to 4K@60Hz 4:4:4
Audio
Input| –| (1) SPDIF IN
Input Connector| –| (1) Toslink Connector
Output| (1) SPDIF OUT| –
Output Connector| (1) Toslink connector| –
Audio Format| Toslink (eARC): PCM, Dolby Digital, DTS 5.1CH
Frequency Response| 20Hz – 20KHz, ±3d8
Max Output Level| ±0.05dBFS
THD+N| < 0.05% (-80 dB), 20 Hz —20 kHz bandwidth, 1 kHz sine at 0 dBFS level (or max level)
SNR| > 90dB, 20Hz-20 kHz bandwidth
Crosstalk Isolation| <-120 dB, 10 kHz sine at 0 dBFS level
Stereo Channel Separation| < -120dB @ 1 kHz
Control
Control Part| (1) IR IN,
(1)IR OUT| (1) eARC Switch (1) IR IN,
(1) IR OUT
Control Connector| (2)3.5mm Jacks,| (1)2-pin DIP Switch,
(2)3.5mm Jacks,
General
Bandwidth| 18Gbps
HDMI Standard| 2.0
HDCP Version| Input: HDCP 2.2, HDCP 1.4 compliant Output:
RX OUT
TX IN| HDCP 2.2| HDCP 1.4| NO HDCP|
HDCP 2.2| HDCP 2.2| NO IMAGE| NO IMAGE
| HDCP 1.4| HDCP 2.2| HDCP 1.4| NO IMAGE|
---|---|---|---|---|---
NO HDCP| NO HDCP| NO HDCP| NO HDCP
Bi-directional PoC| Supported
HDMI V2.0 Cable Length| 4K@60Hz 4:4:4 5 5m, 4K@60Hz 4:2:0 5 15m, 1080P 5 20m
Transmission Standard| HDBaseT3.0
Transmission Distance| 4K/1080p s 328 feet (100 meters)
Operation Temperature| -5 to +55°C (+23° to +131°F)
Storage Temperature| -25 to +70°C (-13° to +158°F)
Relative Humidity| 10% to 90%, Non-condensing
Power Supply| Input:100V-240V AC Output:24V DC 125A
Power Consumption| 16W(Max)
Dimension (WWI))| TX:115rnmx 21.7mm x 115mm RX:115mmx 21.7mm x 115mm
Net Weight| TX:300g RX:305g